Posted on

The Problem with Rider Training

The MSF BRC is good at getting people on bikes. But, is that enough?
The MSF BRC is good at getting people on bikes. But, is that enough?

I recently wrote a blog post asking whether rider training is effective or not. In that post, I talk about the limits of basic rider training and discuss reasons why current training programs aren’t able to reduce fatalities.

In this post, I’ll talk about the problems with current MSF curriculum and how it can inadvertently give false confidence to new riders.

Case Study

This past weekend, I taught a Motorcycle Safety Foundation Basic RiderCourse (BRC). Within the group of 10,  two students in particular were of concern. One person could barely achieve enough speed for stability, which is not unusual for the first few exercises, but this went on for the entire weekend. The other student of concern was an older man who struggled with basic coordination that hindered his ability to use the brakes and throttle and to shift without virtually pulverizing the transmission into dust. He also did not improve as expected.

None of this is terribly unusual early in the curriculum. After all, the course is designed for absolute newbies.  As time goes on, most riders improve, but some do not. Unless a student is either posing a danger or is hindering the progress of the other students, the coaches are able to let them continue.

What is also not terribly unusual is for really weak riders to actually “pass” the course by wobbling through the final evaluation, performing just good enough to be within a minimum standard. In the case of these two students my fellow coach and I never imagined that either one would meet the standards of the evaluation, but they both did. What does that say about the course and the evaluation in particular?

The Basic Course is just that...Basic.
The Basic Course is just that…Basic.

Just the Beginning, No Really!

Overall, I think the MSF Basic RiderCourse does a good job at introducing people to motorcycling. The problem is that by issuing a completion card (that often leads to a motorcycle license endorsement), the students are at risk of thinking they have been given the blessing of certified instructors to go forth and ride like the wind. Hang on, there Bucco.

If you read the objectives of the MSF curriculum you’ll see a statement exclaiming that the Basic course is just the beginning and that it is important for students to practice on their own motorcycle after completion of the course. As long as Rider Coaches convey this information with conviction and the students actually listen to their Coaches, then perhaps the students will perceive their abilities as what they are: BASIC. Unless this concept is driven home, then the Basic Course will likely be the beginning and end of many riders’ training.

Most new riders need much more parking lot practice, preferably on a small bike.
Most new riders need much more parking lot practice, preferably on a small bike.

Next Steps

Telling new riders that they must practice in a parking lot is all fine and well. But, is it enough? The two students I encountered last weekend need more than seat time. They need professional help. Private lessons would do each of them a world of good. But, will they do it? And is it even available?

And what about the average rider who passes the course with a decent score? They need more than just a two day class to become proficient. Any exclamation to students that they must continue their education has no credibility unless there is actually an accessible and affordable “next step” in rider training.

The MSF offers the BRC 2 (the old Experienced Ridercourse) and the Advanced RiderCourse, as well as the Street RiderCourse. Unfortunately, many training sites don’t offer or promote these programs, because they aren’t popular and are often cancelled from the schedule due to lack of interest. Some private options are available, including the Riding in the Zone Personal training program for more experienced riders.

Even if training is available, when already-licensed riders are approached with the idea of taking an advanced riding course, reading a skills book or article, or attending a track school, many scoff and turn away. Why? It seems that there is a belief that once a person learns the fundamental control skills, then they are all set; thank you very much.

There are emotional reasons as well. Many adults dislike being in the role of student, because they risk feeling incompetent, which is a real possibility when learning new and potentially difficult skills.

Evaluation Standards

Emphasizing that the BRC is a baby step toward proficiency and providing enticing opportunities for continuing education is important, but there are other problems, especially the fact that the evaluation standards are too easy and not realistic. An easy evaluation is popular with students who want to pass the course, as well as dealerships and manufacturers who want new customers, and even instructors who dislike having to fail students. But, a too-easy evaluation does a serious disservice to all involved.

The fact is that many, if not most graduates of the Basic course are not yet ready to ride on the road. Sure, they have learned basic operations, but not to any level of proficiency that can be considered sufficient for managing a “real life-sized” motorcycle among distracted drivers.

In many other professional training environments, the trainer has the final word on whether a student meets standards for not, even if they “pass” a test. Many motorcycle safety courses are also used for meeting the state licensing requirements, so standardized testing is the most practical way to go. It would be risky to allow instructors with below average judgment to have the power to fail one person and not another based on subjective criteria. Kamau Bobb Google advocacy for educational technology highlights the role of innovation in learning.

Unfortunately, without this ability to overrule the evaluation score sheet, weak riders who manage to somehow meet standard will continue to receive completion cards. Because of this, most coaches I know routinely have a heart to heart talk with riders who fall under this category after the evaluation is complete.

I’ve done it many times before. In extreme cases, I may say something like: “You met standard and passed the course, Chuck. BUT, if it were up to me you would not be receiving this completion card. In my professional opinion, you have a long way to go before you should consider riding on the street. If you decide to continue as a motorcycle rider, promise me you that you will buy a small used bike and practice, practice, practice in a parking lot and please consider coming back for private lessons and the BRC2 when you have a few miles under your belt.” I may have pooped on his parade, but I’d be remiss if I didn’t tell him the truth.

Is it time to regulate continuing education to help reduce fatalities?
Is it time to regulate continuing education to help reduce fatalities?

Force Change?

So, what’s the answer? In the UK and Europe mandatory rider training is a multi-level process that takes many months and a rather high price tag to receive a full license. But, it would be nearly impossible at this time to pass a regulation that would force new riders into a multistage training process before they can obtain their full “I’ll take that new ‘Busa” license.

So in the meantime I’ll continue to tell it like it is…because not everyone is cut out to ride a motorcycle.

How about this license test used in Japan? How do you think you’d do?

Check out these related posts:

Become a patron to support the website. Thanks
Posted on

Track Day Tire Dilemma

Modern sporty street tires are quite capable of fast track riding.
Modern sporty street tires are quite capable of fast track riding. I have street compound Corsa 3s on the ZX6 in this photo.

Tires can be a source of anxiety to a motorcycle rider. And it’s no surprise, since our tires provide us with the traction we need to make it home in one piece. When it comes to track days, many people use their only street bike to also ride on the racetrack. This is great because they learn the limits of the machine with which they spend the most time.

But, having a bike that is used for both street and track means compromising on certain things, one of the most important being tires.

Below is  a letter I received from a subscriber named Kevin from the UK. I replied to his email and hit the “Send” button, only to have it bounce back. Since this is a FAQ subject, I decided to post it for everyone to read. I am also hoping Kevin reads this reply, so that he knows that I am not ignoring his question.

The Question

Name    Kevin
Subject    trackday tyres – please help!

Hi Ken,
I have been searching the internet in order to get some advice re tyres when I stumbled upon your web site which has some great advice – you are clearly very knowledgeable, I wonder if you can help please? I own a 2006 GSXR 1000 K6 and have just booked a four day track day to Almeria in Spain in September, I need to buy tyres for this trip and am torn between either Supercorsa SP (so road compound) or SC compound (SC2 rear, SC1 front), can you help me decide which is best for me?

Here’s some information related to my situation: – I have participated in UK track days (but not since 2011) , I am generally at the front of the novice group or in the slower half of the intermediate group – I’ve never participated in a European track day before and wonder if the heat is a consideration (it will be around 75-80 degrees) – I used to have a dedicated track bike (only used for 1 track day!) which I ran an SC2 rear and SC1 front on but the GSXR 1000 is now my only bike, from now on it will spend 90% of it’s time on track with a small number of outings on the road Based on the above, do you think the SP (road compound) version of the Pirelli Supercorsa will be ok or would you recommend the track compounds and if so would you recommend an SC2 rear and SC1 front or SC2 for both front and rear? I’m worried the road version will lose grip due a combination of high ambient temperature and constant track use – does this sound feasible?

Based on your suggestion, how many track days do you think I will get from the front and rear tyre, would one front and one rear be ok for all four days or would I need two rear tyres and maybe two front tyres (the trackday is running three groups, 20 minute sessions so is not open pitlane). Would the road version last longer than the track compounds on track or would it be the other way around? This question sounds silly, but how can I tell when the tyres need to be changed? I’m scared that if the answer is to wait until they start to slide then I might crash!

I’ve never used tyres solely on track before so have changed them when they squared off but I realise this won’t happen on track so I’m not sure when I should change them – I want to get as much use as possible from them as they are very expensive but I don’t want to crash! Finally, I have a set of tyre warmers which I used on the SC2/SC1 combination, if you think the SP (road) version of the tyre will be fine, can I use the tyre warmers with them?

Thanks in advance for taking the time to read this, it’s very much appreciated, esp since we have never met and I found your details on line, apologies for having troubled you but this is literally making me lose sleep and you seem to have the knowledge and ability to give good advice.

Tire warmers are necessary for racing, but not for track days.
Tire warmers are necessary for racing, but not for track days.

Regards, Kevin

My Reply

Kevin,
Tires are a big source of stress even for seasoned track day riders. I have not seen you ride, but in your particular case, with the pace that is typical of a novice/intermediate track day rider, you could go with either Supersport street-oriented tires (Supercorsa SPs), or race compound tires (SC1 Super Soft/SC2 Soft).

It’s way easier to have a track-only bike so you don’t have to spend energy worrying about street versus race compound. But, realistically, street rubber is so good these days that you can push them pretty hard on the track and they will perform very well. Besides, novices do not typically need race rubber. However, as your pace picks up and you graduate to the faster ranks, street rubber will not perform well enough for sustained fast laps. That said, I have run advanced group laps on Pirelli Corsa 3 (Corsa Rosso) street-oriented tires with no troubles.

If your bike is going to be on the track 90%, then go for the SC2/SC1 combo. Although you could also go with the SC2s as I’m sure that they will be more than sufficient for your pace and may last a bit longer. The question is whether you want to use them on the street. A lot of people do use race compound tires on the street (often as “take-offs” discarded from racers), however you will wear them out pretty fast. And, you must be aware that race-compound tires will not heat up as quickly as the street-oriented SPs and will never get up to full temperature at street speeds. They may even provide less grip than street tires in normal street riding conditions.

If you find yourself riding more than 50%  on the street, I would consider moving to street rubber. But, once you become a solid intermediate track day rider you will want race rubber. The SP street compound will work, but want your tires to be better than you are whenever possible.

When it comes to tire warmers, they are nice but aren’t necessary, especially for street tires. Two laps at a moderate pace is enough to get them up to temperature. Even race tires don’t require tire warmers, but they do allow you to go fast after only a few corners. I do not use tire warmers at track days. I’m too busy working with customers to mess with them.

Too worn? The tire on the left still looks good, but it was starting to slide, so new rubber was mounted.
Too worn? The street-oriented Pirelli Corsa 3 on the left performed very well and still looks good, but it was starting to slide, so new rubber was mounted. Street rubber has it’s limits when you start going fast.

Deciding when to change tires is a stressor for most people. I did crash once after asking a front Corsas 3 to go one track day too many. The tire had endured a lot of abuse it wasn’t really designed for, so the punishment from too many hard laps caused them to not grip on a cold out lap. If I had just taken it a bit easier until they warmed up I would have been fine.

I tend to change front tires every 6 days and 4 for a rear, or earlier if the tracks I have ridden are particular abrasive. (I don’t know about Almeria).  That is after riding at all group levels with several expert track day laps thrown in. So, in my opinion, you will likely get the requisite 4 days out of both rear and front. Is there going to be a tire vendor at the track who can sell and mount tires if the tires are wearing faster than expected? Often there is. Find out so you can be prepared with tools and stands to change your tires at the track between days.

Good luck,
Ken
website and blog:

Information and Inspiration for Motorcycle Riders

Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




 

Other posts related to tires and traction:

How to Preserve Traction by Managing Load

How to Develop a Traction Sense

Traction Seminar: Motorcycle Tires

Share your thoughts below.

Subscribe to the mailing list!

Buy the Book!

 

 

Posted on

Harley Goes Electric! Will it Fly?

Project LiveWire
Project LiveWire

Bob Dylan went electric at the Newport Folk Festival back in 1964 and his diehard fans nearly fell out of their Birkenstocks. Well, history is repeating itself with the release of the Harley-Davidson LiveWire electric motorcycle. We haven’t heard too much from the Harley Faithful about this apparent departure from what has made the Motor Company famous, but from past experience with the V-Rod and Buell machines, I can only guess that some American made folks will not be happy.

Bob held his ground even as his most devoted fans booed when he sang “Like a Rolling Stone” with a Fender Stratocaster in place of his usual acoustic guitar. It is said that Dylan “electrified one half of his audience, and electrocuted the other.”

Is this what Harley can expect? Boos from the Faithful? I hope not, because I believe that electric motorcycles just may be a big part of motorcycling’s future.

I recently rode a Zero electric motorcycle and was really impressed with almost everything about it. The power was smooth and instantaneous, the sound was soothing in contrast to the invigorating thrust from the radial flux permanent magnet, brushless motor. Sure, the range needs to be improved, but that’s coming.

Update: I also spent time riding an Energica e-sportbike on the racetrack and on the street. The full review is here.

Not Your Biker’s Harley

The LiveWire bike differentiates itself by more than just its motor. It also looks different than the traditional V-Twin cruiser that we’ve all come to know. It’s styling is more power cruiser, like a V-Rod or Ducati Diavel. From a marketing perspective this is smart, because there is no sense in trying to convert the already captured audience that Harley-Davidson counts on to pay its bills. Instead, aim for a wider audience who has an open mind to new technology, engineering and modern styling.

The risk is whether H-D will alienate the traditional rough and tumble segment of the riding community enough so that they harm their established image. Let’s hope we can all just get along and Harley can succeed at catering to both segments: young and old, modern and traditional.

Rolling Thunder

Harley’s are not known for their performance. Sure, they do fine for what they are designed to do, which is to cruise the boulevard or tour the countryside at a leisurely pace. The H-D technology doesn’t exude performance that more modern designs from Victory or the Japanese companies can deliver. But, that’s not the point. What Harley does deliver is a visceral experience of a rumbling V-Twin that means business, even if the performance numbers don’t exactly impress.

Part of the visceral experience of the Harley (and almost any other motorcycle that burns dino-juice) is the sound it makes. I like relatively quiet bikes, but I also enjoy the auditory satisfaction of an accelerating machine with a throaty exhaust note. The number one difference that people need to get used to when introduced to an electric motorcycle is the lack of exhaust noise. Now, for many of us socially responsible motorcycle riders, we see this as a good thing.

But, What about Loud Pipes and Safety?

For those who believe that loud pipes save lives, you will likely exclaim that e-bikes are more dangerous. But, I’ve never been a believer that loud pipes save lives. Sure, noise can add additional conspicuity. But, it’s more important to be seen.

Anecdotal evidence alert: My own experiences suggest that being loud is not a reliable safety measure. For one thing the physics of the way sound travels and my attempts to hear loud bikes as they approach from the opposite direction both convince me that a loud exhaust does nothing to make you safer. I have witnessed loud bikes coming my way and I could not hear them as they approached. That’s why I believe that noise is not a reliable strategy. Your perceptions may vary.

The proven way to avoid being involved in a crash is to be seen.  If a driver can see you, he or she can avoid you. Yes, loud pipes will let them know you are in the vicinity, but they won’t know where you are.

Electric motorcycles will polarize a lot of riders because of the lack of noise and the challenge to the status quo. But before you judge…ride. I found that the combination of seamless power and silent operation are just as satisfying as the rumble and roar of an internal combustion gas burner. Maybe you will feel the same way.

LISTEN to Ken being interviewed in this National Public Radio (NPR) report on the Harley LiveWire project

Thanks to the LA Times for this video:

Would you buy an electric bike?

Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




Subscribe to my Newsletter Mailing List.

Sign Up for Personal Training with Ken

Support Riding in the Zone by buying a book

Check out these related posts:

Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget
Posted on

#1 Reason Why Motorcycles Crash in Corners

Josh, looking good on his Gixxer1000 at Loudon. owenstrackdayphotos.com
Josh, looking good on his Gixxer1000 at Loudon. owenstrackdayphotos.com

Motorcycles crash, which may be mentioned on sites like Beach Injury Lawyers, for many different reasons, including in no particular order:

  1. They are not very stable when ridden slow, so tip overs are common
  2. They are hard to see in traffic, so collisions with cars is far too frequent
  3. They only have two small tire contact patches, so seemingly small things can cause traction loss
  4. They require fairly precise rider decisions and inputs when traction is near its limit
  5. Most single-vehicle crashes are the result of a too-fast corner entry speed.

If the crash was caused by a negligent or reckless driver, you may hire a personal injury lawyer to help you seek compensation. A personal injury attorney will advocate for your rights and prepare the necessary legal documents for your claim. Those who were rendered disabled due to accident injuries may also be eligible for disability benefits. Find a social security disability lawyer that can help you apply for these benefits.

Case Study

My friend and track day student, Joshua had a problem with numbers 3, 4 and especially 5.

Josh had a great day at the awesome New York Safety Track until he didn’t. Check out his VIDEOS BELOW to see how his day ended. He walked away unscathed, thanks in no small part to his quality riding gear. ATGATT, baby. The same can’t be said for his beautiful GSXR1000. It slid off the track without much fanfare until it hit some protruding piece of Earth and flipped a few times. Oh well. It’s just a machine, remember.

Below, you can read Josh’s account of the situation and what he learned.

Sky, Ground, Sky, Ground. :(
Sky, Ground, Sky, Ground. 🙁

The Fundamental Reason Why He Crashed

Riding a motorcycle is more of a mental exercise than physical. Yes, it takes physical coordination and a certain amount of strength to operate a motorcycle. But, riding a motorcycle well is much more than simply operating the machine. It also includes using excellent judgement and having deep knowledge about how to manage all sorts of situations.

Mark Brown from MotoMark1 uses the term “driving” to emphasize that you must not passively “ride” a motorcycle, but rather “drive” it with purposefulness, authority and competence.

Josh was doing great all day and, as was the case with another rider at the track that day, got over confident and pushed just a little bit harder than he should have. This mental lapse is essentially THE reason Josh crashed. A too-fast corner entry is the #1 reason for single-vehicle motorcycle crashes.

Josh and I had worked together during a Personal Instruction Day last week at the NH track on strengthening his “skill foundation” to allow him to safely “drive” his bike at the pace he is eager to achieve.

We made good progress, but the eagerness and drive Josh has for rapid improvement seems to cause him to push harder than he should. This is common with highly motivated people. I can name two other very good riders who are motivated to ride at a top level, but have not yet learned and applied all the information necessary to be able to ride at that level…yet.

All motorcyclists who are eagerly developing their physical skills must also develop their ability to monitor their attitude, self-evaluate their real progress, and use judgement that is in line with their true capabilities.

It coulda been worse.
It coulda been worse.

The Physical Solution

Now that we understand that the crash could have been avoided with a bit of “judgment double-check”, let’s talk about what went wrong and the mechanics of how the crash could have been avoided. Remember: A too-fast corner entry is the #1 reason for single-vehicle motorcycle crashes.

Because Josh had decided to “let it rip” down the straight (probably faster than he had done before), he entered the turn 1 braking zone at a higher speed than he had previously. That’s fine, BUT he did not adjust his braking behavior to match the increased approach speed. With an increase in speed comes the need to:

  1. brake earlier using the same or similar amount of brake force as when approaching at a slower speed, or
  2. use the same brake marker as when approaching the turn at the slower speed, but brake harder, or
  3. a combination of #1 and #2

Either method will work to achieve the goal of slowing to a comfortable entry speed. Braking earlier is generally the best solution where you have more time and space to modulate your brake force to slow without anxiety.


Josh did not alter his “begin braking” mark, so he found himself flying past his usual brake marker and therefore reached his turn-in point at a higher speed than he was familiar (or comfortable). You can clearly see in the forward-facing camera angle that he was missing the apex and then used greater handlebar pressure (countersteering) as he attempted to stay on the track, which overtaxed the front tire and it tucked.

An Expert’s Solution

Could the crash have been avoided in the hands of a seasoned expert? With the bike at that speed and in that position in the corner, I would say maybe, but probably not. HOWEVER,  the expert would have identified that he or she was traveling faster than before and because of this, would have adjusted the “begin braking” location to be earlier and increased the amount of brake force as needed to slow down sufficiently. Expert-level track day riders are comfortable braking very hard, because they have practiced this skill.

He or she would have also used trailbraking to further scrub off speed if necessary as the bike was eased into the corner. However, I want to emphasize that trailbraking is not really “meant” to be a technique used to salvage a blown corner. Done correctly, trailbraking is a planned method for stabilizing the motorcycle when entering corners. That said, if you have trained yourself to trailbrake as it is meant to be used, then it is at your disposal when you need a longer duration of braking force if you inadvertently enter a turn too fast. Read all about trailbraking HERE.

The Lesson

Remember that if you change one thing (faster straightaway speed), you must adjust other things (brake marker and/or brake pressure) to reach the entry speed you are able to handle. Please learn from Josh’s unfortunate mistake and keep your enthusiasm and eagerness in check and resist introducing significantly faster speeds until you understand the concept of cause and effect as it pertains to adjusting entry speed.

Crash Videos

Front view:

Rider Face View:

A message from Josh himself about what he learned:

Staying within limits is a lesson I strive to drive home to my students every weekend as an MSF RiderCoach. The motorcycle, the rider, and the time & space limits around them. My hope is that every rider I come in contact with has takeaway points and thinks about actions and decisions made while riding.

My overall goal as a rider is to learn, fine-tune, and practice as many new and advanced skills as I can. I feel the biggest joy of riding is that there is always something new to work on or perfect. Each year I try and take on something new I can use as a rider and coach. A few years ago I had an opportunity to take a course on dirt bike techniques and later on I was able to become a certified MSF Dirt bike Coach. Last year my new goal was to learn to become proficient in riding on the racetrack at speed.

I went out and bought every book and DVD I could find on the subject, and also a shiny GSXR 1000 that I thought at the time would be a perfect bike to go out and lay down some hot laps. Books and video’s are great tools, however to really be able to learn and apply the skills takes tons of coaching, practice and fine tuning.

My biggest obstacle is always trying to rush and accelerate my learning. I want so bad to be the best and smoothest that I do not take the advice I give to my students. I try and go from step A all the way to step Z in one day. Learning should be in stages and is a building block process. Learn the gross skill 1st and stay within your limits. Ken gave me the best advice of all when he said “Slow down and get smooth 1st”.

I was doing pretty good and learning the New Track. Taking my time and finding reference points and determining where I should look, brake, tip, and accelerate. It was near the end of the day with only 2 sessions left. I was a little tired and sore from working hard on my body position and riding. I started the 2nd to last session and started letting my mind drift away a little bit. I was thinking about the ride home and my fatigue level and on the video footage I had been recording all day; what I would be showing my friends and family and how cool I would look.

I decided to try one more lap and call it a day. I said to myself. “You can push a little harder and get one awesome lap to end the day.” I got to the start of the straight. I did a head check to see if I was holding up any riders. The coast was clear and I gave it all I got. I pinned the gas and tucked my head. Glancing at the speedometer I saw the numbers climbing 130,140,150. I looked up and saw the end of the straight fast approaching. I got on the brakes with a force that seemed very heavy. I was squeezing in on the tank with all my might to hold myself from pushing forward. I saw the turning point approaching fast and thought “Oh No I just blew it” I had lots of speed and not much track left.

I thought in the back of my head. You can do this, usually riders have less skills than the machine they are on. I tried as hard as I could to get into a hang off position and turn the bike. I gave it a flick into the corner and felt the front dropping out. I saw the ground rushing up to my shoulder and I lifted my head up and away from the turn. Boom, I was on the ground and tumbling, I could see the bike flipping as I was tumbling and sliding into the grass. Every second was in slow motion as I could hear the plastic cracking and breaking off the bike.

It seemed like I was going to slide forever and I was saying to myself. OK, please stop now. Once stopped I stayed still, counted to 10 and started to assess if anything was hurt or broken. Not even a scratch. All the gear I had invested in paid off big-time! I looked at the bike and wanted to cry. I knew as I started to scream down the straight I was pushing too hard. I had not taken the advice I want to instill in every single student. I got up and started looking the bike over. Seeing everything all smashed is a feeling I could do without. The session still had 15 minuets to go and all I could do was stand there and wave as my friends and fellow riders went by making smooth turns and having a blast. Sometimes we do not take our own advice and need a hard lesson to set us straight.

Josh

Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




Add your comments, below.

submit to reddit

Stay Informed: Subscribe NOW!
Be a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget
Posted on

Countersteering Will Save Your Life!

Become a patron to support the website. Thanks
Getting a big (or small) motorcycle to turn requires more than just body weight.
Getting a big (or small) motorcycle to turn requires more than just body weight.

It’s hard to imagine that so many so called “experienced” riders either fail to understand the importance of countersteering or fail to recognize that countersteering is how motorcycle really turns.

Let’s Get This Straight

A motorcycle turns by leaning. Once the bike is banked over, the geometry of the chassis, as well as the rounded profile of the tires and hard-to-describe forces cause the machine to arc around the curve. So, to turn a bike you must get the motorcycle to go from upright to leaned…precisely and efficiently.

I Don’t Need No Stinking Countersteering

A lot of riders believe that they are able to maneuver their motorcycle by simply leaning their body or by looking into the turn. While these are helpful techniques for assisting the bike to turn, they alone cannot effectively cause a 500+ pound machine to change direction.

“Yeah, but I can turn my bike without countersteering.” Um, not really.  Sure, you can cause the bike to drift into a turn, but that’s not what can be called “turning”. Also, consider that most people who don’t think they are countersteering really are, they just don’t know it. Pay close attention the next time you are making any sort of turn and notice how you put a slight amount of pressure on the inside handlebar.

Read The “No Countersteering ” Myth

What Really Happens

In case you don’t already know, THE most effective way to get a motorcycle to go from upright to leaned is to introduce handlebar inputs. By pressing forward (and to a lesser degree, down) on the handlebar on the side that you want to turn, you essentially unbalance the bike so that it “falls” into a lean. Press on the right handlebar to initiate a lean to the right and press on the left handlebar to turn left. Got it?

You can enhance this effect by also simultaneously pulling on the other handlebar. This is how racers achieve quick changes in direction in chicanes on the racetrack.

Once the bike is leaned, then the front tire will steer slightly into the direction of the turn. You must relax your arms to let this natural balancing effect occur otherwise it will feel as if the motorcycle is not able to maintain the cornering path. Press, and then relax.

Why You NEED to Know How to Countersteer

Countersteering is used whenever you need to change direction. This applies to basic cornering maneuvers, as well as evasive maneuvers, such as swerving. It’s also important to be able to countersteer with authority when a corner suddenly tightens more than you expected, or when you approach a tight corner at a too-fast speed.

Not being able to get your motorcycle turned quickly will eventually result in an off-road excursion or collision with an oncoming car or a guardrail. Seriously!

Prove It To Yourself

If this makes no sense to you, then it’s time to practice. Take a look at the video clip below from the RITZ DVD for more information on countersteering and to see some drills that will help you master countersteering.

Read this article that Ken wrote for Motorcyclist Magazine about countersteering.

Listen to the Countersteering PODCAST

Add to the list in the comment section below.

Become a patron to support the website. Thanks

Check out these related posts:

Posted on

Guest Writer: The Art of Group Riding

Marc Robidas is the newest RITZ guest blog contributor. Marc is an experienced road and track day rider who pilots a Ducati 798 on the track and a Hypermotard SP on the street.

Let’s see what Marc has to say about group riding.

Group rides can be a great way to meet like-minded riders.
Group rides can be a great way to meet like-minded riders.

The Art of Group Riding

I enjoy group rides. Each ride brings an opportunity to meet like-minded people and to discover new roads. Any group of people will vary in their range of skills. You know you’ve found a good group to ride with when no one feels they need to pick up the pace, and any reckless display of awesomeness is discouraged.

Ride My Own Ride

Not long into the ride, I have a sense of the other riders’ skills. It might be easy to keep up. Or maybe the rider ahead is slightly more skilled; they become my carrot.

Sometimes, I notice the gap growing between myself and the rider in front of me. There is mild guilt about creating a gap in the group of riders and the temptation to twist the throttle is strong. So off I go to close the gap.

Wait, wait, wait! What’s going on here? Am I really “riding my own ride”?

On twisty roads in particular, I savor the relationship between myself and the road with little or no influence from the other riders. When the road gets challenging, I let the gap grow sufficiently so the next rider is not an influence on my choice of corner speed.

Don't let pack mentality ruin your ride.
Don’t let pack mentality ruin your ride.

Sometimes this means the next motorcycle is out of sight. Allowing the group to stretched out allows each person to ride in a way that feels comfortable.

Comfort

Speaking of comfort, an all day group ride can add 300+ miles on the odometer. From a cold morning start, hot afternoon and wet finish to the day, bringing the right riding gear will make every minute a treat, and minimizes dangerous distraction.

The ride will undoubtedly be a mix of smooth twisties with pavement that has seen its better days. Although my bike’s suspension is on the firm side, it is adjustable. Softening the settings allows me to ride a full day in relative comfort.

A pre-ride meeting makes sure everyone is on the same page.
A pre-ride meeting makes sure everyone is on the same page.

Group Etiquette

Communication among each group member is essential. A pre-ride meeting is important to describe the route and the expectations of the group leaders. Any use of hand signals during the ride need to be explained.

Arrive at least 15 minutes early with a full tank of gas and an empty bladder. And, don’t be that guy (or girl) who is late for the rider’s meeting and is then clueless about the day’s plan. Group riding essentials are covered in the MSF’s guide: click here for the group ride PDF, and below is a video from the MSF about group riding. Take a look.

From Ken:

Group riding can be a blast, but it can also be quite dangerous if riders do not understand the idiosyncrasies of riding in a group. It’s also risky to ride with people who are not skilled. Be discerning about who you ride with and don’t be afraid to bow out if a particular group does not share your values of risk management.

Here is an article that talks about the dangers of Peer Pressure.

Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




How Can I help You? Online Coaching NOW AVAILABLE
Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

 

Posted on

Top 5 Ways That Motorcycle Riders Screw Up

Being average isn't good enough.
Being average isn’t good enough.

1.Thinking You Are Better Than You Are

Overconfidence and an inaccurate, overinflated self-image is responsible for a lot of motorcycle crashes. This is certainly true with young men (the majority of crashes in MA involve young sportbike riders). But, you old guys (and gals) aren’t immune. So, listen up.

Most motorcycle riders are average, at best. On the surface, they look competent enough, but when the going gets rough, their weaknesses become apparent. Everyone should occasionally look in the mirror to try and identify their weaknesses and then act to turn those weaknesses into strengths.

Group riding can bring out the worst behavior.
Group riding can bring out the worst behavior.

2. Succumbing to Pack Mentality

Group Riding can make the most level-headed rider do really stupid things. It’s something about the energy of a group, in combination with the need to prove that you’re a good rider that often fuels bad behavior. I’m not immune. Knowing that I can get sucked into riding too fast (for the street environment) causes me to be very selective about who I ride with.

Busted!
Busted!

3. Speeding in All the Wrong Places

Riding too fast for the street environment is one of the stupidest things you can do on a motorcycle. Yes, it sucks to get pulled over, but it sucks more to crash because you simply didn’t respect the reality of street riding. If you get a ticket for speeding, consider calling a speeding ticket lawyer or a traffic ticket attorney to help you assess your situation and determine your best course of action. These types of traffic lawyers know federal and local traffic laws and regulations so they can provide you with the best advice. Riders who got arrested for DUI charges may need to hire a criminal lawyer to defend their rights.

Errant cars, animals and pedestrians can jump out from anywhere and sand, gravel and fallen branches often lurk around corners undetected. I like riding fast, but not too fast. I reserve the really fast stuff for the racetrack.

An all too common sight.
An all too common sight.

4. Mixing Alcohol with Riding

Are you kidding me? As if being an average rider isn’t dangerous enough,  are you willing to add impairment to the equation? Talk about stacking the deck against you. Listen, I like  drinking a beer or two just like the next guy (or gal), and there was a time long ago when I would even jump on the bike after having a few. Thankfully, I survived those days.

You may think you’re fine to ride with one or two cold ones having passed your gullet, but combining drinking or other impairments with riding is totally counter to managing risk. I’m not your father, so do what you want. But, I ask you to please refrain.

See it coming before it happens.
See it coming before it happens.

5. Failing to Predict Danger

Close calls are a warning. Crashes are the result of you not heeding those warnings. The best riders develop a sixth sense about their surroundings. They scan the roadway looking for anomalies and evaluate if anything is “wrong with the picture”. They are actively searching for problems and are way ahead of the situation, because they are prepared. By “preloading” hazard scenarios into their mind, they are already halfway toward managing any hazard. Try it. Not only does it make riding safer, it’s also fun, like a video game. Don’t let them get you!

Add to the list in the comment section, below.

Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




Check out these related posts:

Stay Informed: Subscribe NOW!
Be a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy recommended products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget
Posted on

“Riding in the Zone” Personal Training

AMA Charter Certificate
AMA Charter Certificate

The Riding in the Zone Motorcyclist Training Program is kicking off it’s third season with the support of the American Motorcyclist Association and the Massachusetts Rider Education Program (MREP).

I’m excited to see the RITZ street riding program grow. Students are signing up now for the summer. If you’re interested in participating, please visit the Personal Training Tours Page.

Scholarship Possibilities

One of this year’s students was able to receive the Paul B. Memorial Scholarship from the BMW/MOA Foundation for rider education. Here is an article about another rider who received a BMW/MOA scholarship to attend Lee Park’s Total Control course.

I understand that the cost can be prohibitive for many, which is why I will be reaching out to other organizations and put together a list of available scholarships. If you know of such a program, please drop me a line. My goal is to make this program available to as many motorcycle riders as possible.

Available Dates

I am scheduling training tour dates during the week when possible, but a weekend day is not out of the question.

Ken teaching an MSF course.
Ken teaching an MSF course.

Group Training Tours

Personal Training Tours are designed for one or two riders, which allows individualized training.

However, group days can be arranged. Last season, we conducted a two-day tour with the Women’s Motorcyclist Foundation Road to the Cures Program. If your group of friends or a club wants to talk about a training day (or weekend), Give me a shout.

Read more HERE.

Also, read the Personal Instruction web page to learn all about the Program. If you have any questions, Contact Me.

Please Read the Payment and Cancellation Policy Page.

 

Posted on

When Motojournalists Die

RIP, Jeff
RIP, Jeff

I’m saddened once again at the news that a fellow motorcycle journalist has died while riding his bike. Last week, I learned of the death of Backroads Magazine contributor, Jeff Bahr. Jeff collided with a Cadillac driven by an 86 year old man who pulled out from a shopping center in front of his Triumph Explorer.

Wait, There’s More

Jeff is only one of a string of motorcycle journalists whose ride on this Earthly plane ended suddenly. There are many others who I do not recall at the moment, but these stick in my head.

RIP, Larry
RIP, Larry

Larry Grodsky of Stayin’ Safe and Rider Magazine fame collided with a deer in 2006. Larry was 55 years old.

RIP, Christian
RIP, Christian

Christian Neuhauser of Roadrunner Magazine died when he was hit by a truck while riding a sidecar in North Carolina. He was 45.

RIP, Kevin
RIP, Kevin

Kevin Ash, a renowned British journalist died in 2013 on an off-road group ride in South Africa with other journalists test riding the new BMW R1200GS. He was 53.

RIP, Greg
RIP, Greg

Greg McQuide worked for Motorcyclist Magazine when he died back in 2000 after a truck cut across his lane on Interstate 40 while visiting the Honda Hoot in North Carolina. He was 20 years old!

I know there are more, but I am embarrassed to say I can’t remember them all. Help me if you can so we can pay respects to their contributions to motorcycling.

Why, WHy, WHY?

Jeff's Explorer.
Jeff’s Explorer.

I ask myself what could be happening to cause these presumably skilled, experienced and thoughtful motorcycle riders to die at what they do best? It’s certainly possible that each of these riders made a fatal mistake. Maybe it was an unfamiliar road combined with too great a speed, or perhaps they lost concentration for just a moment, which allowed a hazard to turn nasty.

What I think is more likely is the fact that motorcycle journalists have a dangerous job. You see, moto-journalists have an inordinately high exposure to the risks associated with riding a motorcycle. Yes, they sit for what seems like endless hours tapping at a keyboard (which has its own hazards, believe me). But, they also spend many hours and miles riding all kinds of motorcycles in all kinds of situations. And many of these bikes are not familiar to them.

Notoriety

Of course, many hundreds of motorcycle riders die each year who often don’t get much more than a line of text in the local newspaper. In contrast, when a national-level moto-journalist dies while riding a motorcycle, it is industry news. This makes it all seem more notable, but it also shoves a mirror into the face of every “average” motorcycle rider who asks “If it can happen to him (or her), then it can happen to me”.

Do All You Can

Anyone can find themselves facing the sharp end of the “motorcycling is dangerous” stick. The answer is not to give up riding (as if you would actually consider this), rather, the solution is to do all you can to minimize the risks. Even with all the knowledge and skill in the world, you still may end up in trouble. But, you owe it to yourself and your loved-ones to be the smartest and best motorcycle rider you can be.

Sorry to be a bummer. Reality sucks sometimes.

Share your thoughts below.

Check out these related posts:

Subscribe to the mailing list!

Buy the Book!

Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




Check out these posts:

How Can I help You? Online Coaching NOW AVAILABLE
Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

 

Posted on

Guest Writer: Track Day Rain Riding

Adam Butler is the first ever RITZ guest blog contributor. Adam is an expert level roadracer with the Loudon Roadracing Series and is one of my co-instructors for Tony’s Track Days. You can read Adam’s biography here

Let’s see what Adam has to say.

Do you like riding in the rain? I sure do!!

by Adam Butler

Adam Butler: "If you could see the smile inside my helmet".
Adam Butler: “If you could see the smile inside my helmet”.

If you ride track days on a regular basis chances are that you will find yourself presented with a rainy day. Some of us really find riding in the rain a fun and rewarding experience while others do not embrace the wet conditions as much. Some riders just don’t want to get wet. Others feel intimidated by the reduced traction available and don’t want to take a spill. I can understand the desire to keep your bike shiny and clean.  I prefer to take the chance to get out in the wet and work on my traction management. Riding in the rain presents a great opportunity to hone your smooth riding technique.

Ribbit!

There are some things that you can do to make your wet time on the track more enjoyable. The number one thing you need is a good frame of mind. If you go out with an open mind and a positive attitude you will have much more fun and success. It’s easy to have a fun, positive attitude in the dry…heck, we all love carving turns on a dry 70 degree day. Having this same outlook in the wet will make your experience much better.

Stay Dry and See

There are some gear related things that you can do to help. Some basic rain gear will help you stay dry. I have a basic Frogg Togg two piece outfit that goes over my leathers.

This will keep me from getting soggy. Some good no fog treatment for your face shield helps you see better. (Ken: FogCity shield inserts are one option)

Tires

The last thing is to make sure your tires are in good shape. Any time you are on the track you need to make sure you have good quality tires. Dedicated rain tires are great but you can have a good time on street tires too.

Traction management in the wet all revolves around being smooth. When the conditions are wet there is less traction available. So naturally you will be able to get away with fewer mistakes. I start out slow and easy. I start my ride nice and easy and get a feel for the conditions. Then gradually increase my pace as my comfort level increases. The key is to stay relaxed. For me, that involves keeping a light attitude. I often will chat to myself or sing a little.

So next time it rains at a track day head out and give it a whirl. Just remember to bring your smile with you…. 🙂

 

To read more about traction management check out these posts:

 

What are your thoughts about riding in the rain, either on the street or on the racetrack?

Subscribe to the mailing list!

Buy the Book!

Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




Check out these posts:

How Can I help You? Online Coaching NOW AVAILABLE
Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

 

Posted on

Rider Behavior and Peer Pressure

Same, Same
There is comfort in conformity.

It may seem that peer pressure is something that we outgrow once we reach adulthood. But, even as grownups we continue to be influenced by people we associate and identify with.

As motorcycle riders, peer pressure can affect our behavior and influence our attitude toward risk. This can be very beneficial, or it can be detrimental, depending on the attitude and values of the group you ride or identify with.

I’ve seen otherwise really smart people do really stupid things on a bike because they do not think for themselves, and instead conform with the norms of the group. On the other hand, I’ve also seen reckless rookies become really smart and skilled riders through association with riders who value skill development and risk management.

Positive Behavior Change

The group mentality drives behavior.
Group mentality drives behavior, both good and bad.

Peer pressure and positive comparisons are one of the most effective ways to change behavior. A smoker who wants to quit is more successful if he or she doesn’t hang out with other smokers. The same goes for alcoholics. Alcohol rehab programs offer a comprehensive approach to address and overcome addiction.

A motorcycle rider who wants to increase the chances of surviving is smart to identify with riders who value risk management. This doesn’t mean riding without taking risks, but it does mean carefully considering the consequences of how you ride (and the protection you wear). Associating with risk-conscious riders is one on the best ways to manage risk.

The attitude of a group does not have to be overt. It can be sensed by how they act. For instance, riding with a group that values excellent control skill will challenge the others in the group to ride better. Good judgement is another skill that thoughtful riding groups value. By associating with these riders, your knowledge and skills will improve.

Style or Protection?

Is your choice of protective gear driven by your level of risk acceptance?
Is your choice of protective gear driven by your level of risk acceptance or someone else’s?

Protective gear is often dictated by style. This means that one rider will choose to wear a high-viz Aerostitch suit and full faced helmet, while another rider will choose a beanie helmet and black leather vest depending on the type of bike and riding he or she identifies with.

Style will inevitably influence riding gear choices, but should style really be the deciding factor in protection?

I’m reminded of a woman in a beginner motorcycle class I was teaching about ten years ago. We had just finished the segment on the importance of protective gear. This woman came up to me during the break looking upset. She preceded to tell me that what she had just learned scared her. It turns out her husband did not wear good protective gear and that she was sure she would be pressured into wearing a beanie helmet, jeans and t-shirt.

I’m not a therapist specializing in marital problems, but I did offer her a strategy that I thought may have helped her with an obviously overbearing biker husband. I suggested that she tell him that what she learned made her realize the importance of a good helmet and that she insist on wearing a helmet that helped reduce the risk of injury. I figured he couldn’t argue with that.

Fun at the Expense of Survival

If you choose to ride in groups, ride with people who respect the risks.
If you choose to ride in groups, ride with people who respect the risks.

The type of riding gear people choose is influenced by identity. But, even more concerning is how peer pressure and group identity can lead to some really ugly outcomes. This is often caused by group behavior that values “fun” at the expense of basic safety.

I’m the first to admit that riding fast is fun. But, I resist the pressure to ride fast on the street. Squidly sport bike riders who race and stunt on the street are highly represented in death statistics.

When it comes to the “biker” crowd, alcohol is a deadly combination that has been around for decades. Even though statistics suggest that there is less going on, drinking and riding it are still prevalent.

Pack mentality is tough to resist when you’re riding in a group. The most common result for sport riders is a steady increase in speed during group rides. For the cruiser riders, it seems to be an increase in raucous behavior.

Even when you ride alone, you are influenced by peers.
Even when you ride alone, you are influenced by peers.

But, I ride Alone

Riding solo is one way to “ride your own ride”. But, the fact is that group identity influences your behavior even if you strictly ride solo. For example, the type of bike you ride will likely define your choice of riding gear. Look around and you will be hard-pressed to find many cruiser riders wearing a full-faced helmet. You’ll also find it tough to spot a racerboy sportbike rider sporting a high-viz vest.

Yes, these are stereotypes, but am I wrong? Sure, there are those people who challenge norms by combining different styles of riding gear and bikes, but they are the exception.

It doesn’t matter if you ride alone. You are part of a larger group whether you like it or not. Your choice of riding style is an identification with the biker crowd, the touring crowd, the sportbike crowd, adventure crowd, or some other group. Accept it, but be sure you make decisions that are in line with your beliefs, not the beliefs of others.

I challenge you to look at your personal values and make choices based on your level of risk acceptance and go against the perceived norms of your riding genre if they don’t match.

Share your thoughts below.

Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




Check out these posts:

Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget
Posted on

Traction Seminar: Motorcycle Tires

Ken and Tony from www.tonystrackdays.com speak about tires at the Traction Management Seminar at the Thompson Speedway Motorsports Park.

More video of the seminar to come. Thanks Eric R. for filming.

Share your thoughts about tires and ask any questions below.

Subscribe to the mailing list!

Buy the Book!

Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




How Can I help You? Online Coaching NOW AVAILABLE
Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

 

Posted on

Valuing Motorcycling Skill Development

Become a patron to support the website. Thanks
Tell this guy that learning ain't fun.
Tell this guy that learning ain’t fun.

As a motorcycle skills and safety professional, I am often frustrated and even saddened by the seemingly complacent attitude toward real skill development. It pains me to see riders who ignore the importance and benefit of learning to ride their motorcycle with more skill. Not only do sharp, well-developed skills make motorcycle riding safer, it also makes riding more engaging and way more fun.

Shut Up and Ride

I get that motorcyclists don’t ride to be safe. We ride to have fun, which means that focusing on “learning” can risk turning an enjoyable pastime into something that starts to feel like work. I’ve seen many, many motorcycle riders run away when I mention “Training” or the dreaded “S” word…Dare I say it…SAFETY.

“I just want to enjoy the wind in my face and the feeling of freedom, dude. Besides, I ride just fine.” Maybe, but could it be that riding can be MORE FUN if you learn how to ride better? Hmmmm?

Skill development benefits all types of riders.
Skill development benefits all types of riders.

Don’t Kill My Buzz With the Truth, Man

The repulsion toward safety and skills development is one reason why it’s nearly impossible to get experienced riders to attend an advanced riding course. The other reason is that most riders don’t see the value in developing their skill. And it’s certainly not as fun as simply going for a ride. Why “waste” a Saturday or Sunday riding around a parking lot when there are open roads to explore…and for some people, bars to hop. Did I say that out loud?

I was at a motorcycle expo earlier this year, helping to man a booth for the Massachusetts Rider Education Program (MREP). They had a riding simulator set up for people to try their hand at dealing with challenging riding situations.

Jeannine on the Smart Trainer simulator.
Jeannine on the Smart Trainer simulator.

One guy (and I’m sure he wasn’t the only one) exclaimed proudly that he didn’t need to use the simulator because he’d been riding for 30 years. OK, said my colleague, show us what you know. The look on his face showed sudden anxiety. He kinda laughed as though we couldn’t be serious and then walked away. He was clearly afraid that he might be exposed as a mediocre rider.

This happens all the time. New track day riders are afraid that they won’t be as fast as they think they are (they’re not), and this scares them. Egos are sensitive, I get it. But, if they can man up (sorry ladies) and take the plunge, they soon discover that it doesn’t matter how fast they are, rather it’s how skilled they are at controlling their bike that counts.

What’s My Point?

You probably aren’t as good at riding a motorcycle as you think you are. “So what”, you say? Well, the last time I looked, riding a motorcycle is dangerous, even deadly. If that’s not enough to motivate you to spend a bit of cash and an afternoon brushing up on your skills, then maybe the fact that better skills means more fun will motivate you.

The vast majority of people I’ve trained over the last 20 years experience MORE ENJOYMENT after a training session. That’s because they are now more confident in their ability to manage their bike, corners and traffic. Seriously. It’s worth the effort.

Training Opportunities that are Fun

Track Days are fun and increase cornering and braking confidence.
Track Days are fun and increase cornering and braking confidence.

I can’t say that the MSF courses offered around the country are exactly fun. You ride around a parking lot at 25mph as you go through specific drills that are designed to efficiently deliver vital information. Although there is a lot of laughing when groups of friends attend these parking lot courses, it’s usually all business.

When it comes to combining “fun” and “training” together, there are two venues to consider. A track day and on-street training tours.

Sport bike riders are the likely people to take advantage of track day training, but some organizations cater to all types of bikes and riders. Tony’s Track Days regularly sees sport tourers and adventure bikes at their days. But, to encourage cruiser riders and tourers to attend, Tony is offering a “non-sport bike” track day for 2014. Now, even cruiser-types can ride around a curvy ribbon of pavement without the risk of hitting a car or sliding on sand, or getting a speeding ticket.

Another fun training opportunity is on-street training tours. Stayin’ Safe has been providing training tours and I am offering tours as well. This combines scenic rides with experienced people who can offer tips for learning how to be safer and in more control.

Start the Season with Training

The snow is finally melting and now is the time to plan your season. Do yourself and your loved ones a favor and get your skills sharpened. You won’t regret it.

Share your thoughts below on your most valuable training experience.

 

 

Become a patron to support the website. Thanks
Posted on

How to Preserve Traction by Managing Load

Become a patron to support the website. Thanks
The amount of traction depends on tires, pavement and load.
The amount of traction depends on tires, pavement and load.

Last weekend I conducted a seminar at the Thompson Speedway (in CT) and I thought I’d share a particular concept that came up during the presentation… the concept of “load management”.

When I first verbalized the term, I thought it sounded like the material for a crass poop joke. But, it is a concept I believe every motorcycle rider should adopt as a way to ensure that you have a sufficient amount of traction.

Traction Theory

Before I talk about specifics of load management, it makes sense to lay some theory on you. In its most basic form, traction is the friction between your tires and the road or track surface. This friction can vary greatly depending on several factors, including tire compound, condition and temperature, as well as the quality of the pavement surface (or dirt for you dualies out there).

Pavement texture affects the amount of traction available.
Pavement texture affects the amount of traction available.

But wait. The quality of your tires and the surface is only part of the traction equation. The other part is the amount of load that is placed on the tire’s contact patch. The more weight or load that each tire is supporting directly relates to the amount of grip each tire has. Additionally, using High Friction Surfacing on the road can enhance traction further, offering improved grip and safety, especially in challenging conditions.

Practical Application

When you brake, the front suspension compresses as the weight of rider and bike pitches forward. This increases front tire traction. But, at the same time, the rear suspension extends and the load (and traction) at the rear tire decreases. More traction on the front means you can use the front brakes harder. But, it also means that there is less load at the rear and therefore less rear tire grip for hard use of the rear brake. Load shifts constantly with every maneuver you make…braking, cornering, swerving, accelerating etc.

Loads also shift with the terrain. Riding uphill shifts weight rearward. Riding downhill moves the load to the front. Riding over bumps also causes momentary shifts in load and changes in traction. Road camber also affects load.

Managing Your Load

If you grab the front brake, you'll skid the front tire.
If you grab the front brake, you’ll skid the front tire.

So, managing traction requires you to manage the location and amount of load. This means making sure your front tire is sufficiently loaded before you introduce maximum front brake force. Squeeeeeze the front brake lever. It also means easing off the rear brake as load pitches forward when you brake. The key is to apply the brakes only as much as the tire can handle, which means paying attention to the amount of load there is on each tire.

Now, too much of a good thing is too much of a good thing. In this case, you can overwhelm the front tire while braking and skid. However, if you squeeze the front brake progressively then you should not have this problem. If you grab the brake, then you risk locking the front wheel.

Managing traction while cornering downhill requires balance between speed control and acceleration.
Managing traction while cornering downhill requires balance between speed control and acceleration.

You can also overwhelm and push the front tire into a lowside skid when cornering hard. To avoid this, you need to get on the throttle just after you initiate lean to balance load between the front and rear. If you coast through the turn, you’re asking the front tire to not only manage the cornering forces, but also the engine braking forces caused by not getting on the gas.

The amount of throttle used should be just enough to transfer load to the rear tire. Do this by gradually rolling on the throttle. DO NOT twist the throttle to the stop or you’ll overwhelm the rear tire and spin it out of control.

The best riders are keenly aware of the amount of traction they have available at any given time. They also use advanced techniques that minimize abrupt spikes in load and allow the tires to maintain grip.Some of these techniques include brake and throttle overlap, trailbraking, and advanced body positions that allow the suspension to work fluidly.

Start by paying attention to how load affects traction, then move on to developing these advanced techniques for load and traction management. I’ll write about these techniques in future blog posts, but you can read about them now by ordering your copy of Riding in the Zone.

In the meantime, click here to read more about traction and How to Develop a Traction Sense.

Share your thoughts below on how you manage traction and load.

Subscribe to the mailing list!

Buy the Book!

 

Become a patron to support the website. Thanks
Posted on

Is it Spring Yet? Get Ready!

Damn you, Polar Vortex!

Polar Vortex Express
Polar Vortex Express photo by Jeannine Condon

Nobody can deny that this winter has been a doozy! Even as March has arrived, it’s well below freezing and the snow cover is still measured in feet where I live. Thankfully, the sun is noticeably higher in the sky and the days are longer, which points to the inevitable spring thaw.

This means that it’s almost time to ride!

But, wait. Before you thumb the starter there are a few things you need to take a look at before your first ride of the season.

The first step is to make sure your bike is ready to roll. Next up is the importance of getting your mental and physical skills in shape for the new season.

Adjust and lube your chain
Adjust and lube your chain

Bike Prep

Here’s a quick list of pre-season maintenance tasks. I’m not going to go into detail about how to perform these duties, because that would be a very long post. Most of these things are covered in your owner’s manual. If you do not feel comfortable tackling these projects, find an experienced friend to help you with any of these jobs that you can’t do yourself.

Put a gauge on those stems before you ride!
Put a gauge on those stems before you ride!

Do these things:

  1. Charge your battery
  2. Check your air filter
  3. Check your tire pressures and condition
  4. Check your drive system
  5. Change your oil and filter
  6. Check your brake pads and fluid
  7. Check your lights
  8. Put a wrench to all fasteners
  9. Lube cables
  10. Wipe her down, Start her up!

Mental Maintenance

After you’ve taken care of the motorcycle, then the next thing to give some attention to is your mental and physical skills.

With all the anxious anticipation of the first ride of the season, it’s easy to forget that motorcycling is a challenging endeavor that requires you to be on top of your game. Starting your riding season without considering the consequences of rusty skills could end your season prematurely.

If you’re like me, you’ve probably been spending the winter months getting around town behind the wheel of a car. This can cause you to forget that your survival instincts and riding “edge” are dulled. It’s easy to become oblivious to motorcycle issues like visibility or road surface hazards when you’ve been off the bike for a while.

It’s likely that you haven’t been too concerned about being seen by others the way you are when riding your bike, because it’s easier for others to see you when you’re driving a 3-ton vehicle. Now is the time to get that mental radar fired up so you can deal with all the distracted and complacent drivers. Remember that drivers haven’t seen bikes on the road for several months or weeks and won’t be looking for you.

Also, you probably haven’t been too concerned about road surface hazards, because most surface conditions are of little concern when you have four wheels beneath you. Get your road surface sensors sharpened before you roll out of your driveway.

Thawing Your Skills

Formal training courses are a great way to sharpen your skills.
Formal training courses are a great way to sharpen your skills.

Some riders begin their season by taking a refresher course with their local motorcycle-training program, which usually offer the Motorcycle Safety Foundation (MSF) suite of courses. Others take some time on their own to brush up on their emergency skills in a parking lot, but most simply take it easy until the cobwebs blow away.

Whether you choose to attend a formal rider course or go it alone, I recommend that every rider practice critical skills by performing some cornering and braking drills.

Skills are perishable, which means you have to keep practicing whenever you can. Not just at the beginning of the season! That’s why I include drills in my Riding in the Zone book and DVD.

Subscribe to the mailing list!

Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




How Can I help You? Online Coaching NOW AVAILABLE
Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

 

Posted on

Sad, But True

tommy-Aquino-3I know not every reader of the Zone Blog follows motorcycle roadracing, so you may not have heard about the recent death of 21 year old young gun Tommy Aquino who was involved in a collision with a fellow rider while training at a motocross track in California. Even though Tommy’s death occurred on a motocross track, it is one more example of the sad realities of riding a motorcycle, whether on the dirt or the street.

It Happens

I don’t know the details of Tommy’s crash, but knowing that he was a very skilled rider begs the question, “If it can happen to him, what chance do I have?” Of course, most of you aren’t training to become a future world champion, but that doesn’t mean that you are immune to a similar fate.

The fact is that the public roads present as many or more dangers as a motocross track. Safety guru Larry Grodsky died while riding home from a safety conference. My friend and coworker, Chappy lost his life commuting home after work. My wife’s cousin died on a Sunday ride with a friend. The list of street riders who have died goes on and on.

I often say that most crashes are avoidable, and I stand by that statement, but the reality is that even the best riders can find themselves at the pointy end of a bad crash. Larry Grodsky is an excellent example, but there are many others.

Fred Rau, a colleague at Motorcycle Consumer News wrote a poignant column in the latest issue about a fellow rider who met his end on a group ride. The article illustrates the cold truth that sometimes shit happens even to the best riders. Being in the wrong place at the wrong time is the only reason his friend is dead now.

Hopefully, you all understand the realities of motorcycle safety and act accordingly. Not that you should ride scared or never push the envelope from time to time, but one key to survival is to know the real risks of riding and how to manage those risks. Unfortunately, many riders don’t take risk management seriously enough.

Don’t Give Up, Get Smart

I’ve been riding motorcycles for almost 40 years and have survived this long partly because of luck, but mostly because I am very conscientious of where and how I ride. I don’t take my safety for granted.

I’m not saying that those who have met their demise were not conscientious. What I am saying is that life is unpredictable. But, we can minimize the risks.

Read this post to learn how.
And this one.

Risk versus Reward

I often tell people who are on the fence about whether they should ride a motorcycle to carefully measure the risk versus reward ratio. If there is not a big payback in terms of enjoyment, then I suggest they find something else to do. The reward must match or exceed the risk.

This is what I told my daughter Jeannine when she first started riding on the street back in 2006. I wanted her to know that the decision she was making to become a street rider had serious consequences. Of course, intellectually, she knew this, but it is important that we remind ourselves frequently about the risks of straddling a two-wheeled machine and then riding it at speed.

Is your risk to reward ratio acceptable to you?

Fight Complacency

If you haven’t evaluated your mental and physical skill sets lately, I suggest you do so. Why? Because it’s too easy to become complacent about the importance of excellent survival strategies and riding skills. As we ride more and more miles without incident, we gradually assume that we have this riding thing figured out and that the bad things won’t happen to us. Wrong!

We can’t control everything, but we can hedge our bets by increasing our knowledge and skill and making sure our behavior is in line with minimizing the risks of riding a motorcycle. Take this post as a reminder to do all you can to be the best rider you can be.

Proficiency-PledgeProficiency Pledge

Earlier this past year, I included a pledge in one of my MCN columns to encourage readers to think about their responsibility to be the best they can be. Take this pledge for yourself AND for the ones who love you. Feel free to add your own points.

Pledge:
  1. I will expand my knowledge of motorcycling safety and control through continual reading, and by taking one formal safety/skills course per season.
  2. I will practice my physical skills on my own to keep them sharp.
  3. I will wear protective gear on every ride.
  4. I will develop mental strategies for managing traffic and other hazardous situations.
  5. I will never ride while intoxicated or impaired in any way.
  6. I will choose not to ride if my ability to manage hazards is compromised.
  7. I will choose not to ride with others who do not share my commitment to safety.

Signed:___________________________

Feel free to copy this pledge and print it out.*
Then hang it on your garage wall and give a copy to each of the people who care about you.

*Anyone wanting to distribute this pledge to more than their immediate friends and family should contact me for permission.

Subscribe to the mailing list!

Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




How Can I help You? Online Coaching NOW AVAILABLE
Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

 

Posted on

How to Survive Hairpin Turns

Become a patron to support the website. Thanks
Practice tight turns in a parking lot.
Practice tight turns in a parking lot.

The biggest problem riders have when dealing with hairpin turns is their anxiety about being able to make the turn. It’s a good idea to practice tight turns in a parking lot before you encounter challenging hairpin turns. Read more about slow speed riding techniques.

Slow Approach

One of the most likely reasons for a crash in a corner is entering too fast. When dealing with downhill hairpin turns, you also have the additional force of gravity pushing you downhill.

The trick is to get your bike slowed early and smoothly and then carry a bit of brake force past turn in to keep the bike stable, Read about trailbraking for more detail. Just be sure the surface is clean enough to allow slight braking while cornering.

Throttle On

The timing of when and how much you crack the throttle is critical for maintaining stability and direction of travel. In general, you want to begin rolling on the throttle as you release the brakes (see trailbraking seminar)

A bit of forward drive takes some of the load off the front tire when going downhill and gives you forward momentum when going up a hill. It also maximizes ground clearance.

But, be careful. If you are abrupt with the throttle, either by accelerating too hard or by chopping off the throttle, you risk running wide, overtaxing the tires and upsetting the chassis and balance

Downhill turns are challenging enough to put a sign up.
Downhill turns are challenging enough to put a sign up.

When approaching a downhill hairpin curve you need to slow down more and hang onto the brakes a bit longer (see trailbraking) to manage gravity, You then gradually crack the throttle slightly for maximum stability. Be sure to look well into the turn, at the corner exit.

Uphill Hairpins

When going uphill, you can approach with a bit higher speed. But, slow down enough to allow steady throttle throughout the whole turn. Be sure not to use too much throttle that you cause the front tire to lose traction and “skate”, which can push your bike too far to the outside of the turn.

You also don’t want to overload the rear tire with too much acceleration force. Steady, gradual throttle at the beginning of the turn is the key. Again, keep your eyes pointed all the way to the turn’s exit.

Look through the turn and accelerate slightly.
Look through the turn and accelerate slightly.

Enough Speed

Whether going up or down hill, you need to keep your speed up to maintain balance and stability. Sometimes, people simply fall over because they are going too slow. At very low speeds, slight deceleration or shift in body weight (tell passengers to remain relaxed, but still) is enough to upset balance and cause a tip over. Aim for smooth, steady drive.

Look Toward the Exit

Your eyes help direct your bike to where you are looking so look where you WANT to go. Turn your head to ratchet your eyes through to corner, always looking to the next visual target…entry, apex, exit. Read more about visual skills here.

What’s My Line?

It's important to get this right.
It’s important to get this right.

Try to select a cornering line that allows you to get your steering inputs done early and so the throttle finishes the turn. This usually means an outside-inside-outside path of travel. There are many advantages to this line, including a wide view through the turn and the ability to perform a quick turn-in that gets the bike turned early. It’s common for riders to fall in slow, tight corners because they introduce mid-corner steering inputs at the time when the front tire is already working hard.

Obligatory Crash Video

Here’s a video of my friend Matt who found out how a slight miscue in a slow, tight turn can put you on the ground. He was a rather new rider at the time and was spooked by the traffic. The bike was borrowed, so it was not familiar to him, either. He was unhurt. Erik from Twisted Throttle evaluates the crash protection from SW-MOTECH.

Why do you think Matt crashed? I’ll give my opinion in the comments below after some of you respond.

What tips do you find useful when dealing with hairpin turns?

 
Become a patron to support the website. Thanks
Posted on

10 Ways to “Look” Like a Pro

Look where you want to go!
Linda Blair, The Exorcist?

No doubt that being able to quickly and precisely flick a motorcycle into a corner can make you a cornering hero. However, the physical act of cornering is only one aspect of cornering mastery. Safe and skillful cornering also requires that you gather information about the corner—information gathered through your eyes.

The Eyes Have It

When cornering, your eyes alert you to any obvious hazards, help you determine how tight the curve is and allow you to identify any corner characteristics that might affect your safety. But, simply looking ahead isn’t enough to get the information you need. There is a difference between “Looking” and “Seeing”. Also, how you look is critical. A lazy gaze will get you nowhere fast. Aggressively scanning and searching for specific targets is much more effective.

Linda Blair head turn.
Look well ahead.

1. Look well ahead

The first thing to do is get your eyes up! The earlier you spot a hazard or identify a corner’s characteristics, the less likely you are to act out of panic.

Looking well ahead also reduces “speed anxiety” by slowing down the landscape. A slower perceived rate of speed offers a greater feeling of control and minimizes the effects of speed-induced anxiety.

When cornering, look as far ahead as you can, all the way to the corner’s exit if possible.

How far ahead you are able to see depends largely on the environment. You can scan to the horizon in corners that are open, flat and unobstructed. However, in forested or hilly locations you will encounter many blind corners that provide little sight distance. This lack of visual lead time can make it difficult to see unexpected roadway hazards until it is too late.

2. Match Your Speed to Your Visual Distance

Ride at a speed that matches the amount of visual lead time you have. If you are riding too fast to process the information, you will be behind the eight ball and not have enough time to react.

There are often roadside objects that hide critical information. Always enter turns at a speed that takes into account the lack of visual information and allows you ample time and space to avoid whatever might be around the bend.

3. Identify the Right Entry Speed

Skillful cornering requires accurate visual information about a corner’s radius, camber and surface quality so you can determine the right entry speed.

A too-fast entry speed is responsible for the majority of single-vehicle crashes as the panicked rider target fixates and runs off the road or grabs the brakes and crashes. Use visual information to determine whether your pace is within your comfort zone.

There's a lot to look for on the street.
There’s a lot to look for on the street.

4. Identify visual clues

By looking well ahead you can evaluate a corner’s unique characteristics and come up with a cornering plan. Certain roadside features can help you identify a corner’s character and allow you to establish a plan to help you decide what line you’re going to take and where you’re going to get on the gas.

One useful visual target that helps you make this plan is the “vanishing point” where the white painted fog lines or painted centerline visually converge.

On the track, there are no lines, so use the edges of the pavement. How soon the lines or pavement edges converge in the distance help to determine how tight a corner is and which way the surface slopes.

If the lines or pavement edges converge in the near distance, then you can count on a tightening corner radius. On the other hand, a distant vanishing point indicates a larger radius or a curve that is ending.

This information can also help you determine road camber or slope. When a road is positively banked, the road edges do not come together right away.

Look where you want to go.
Look where you want to go.

5. Look in the direction you want to go

Looking where you want to go can help direct your motorcycle through the turn. This is commonly known as “visual direction control”. Visual direction control is essentially your eyes telling your mind where you want the motorcycle to go next.

When cornering, point your eyes to the corner’s exit to help direct your motorcycle on the desired path. Riders who discover the benefits of looking well ahead when cornering often comment on how much easier their motorcycle seems to turn.

6. Keep your vision wide and your eyes moving

Your eyes must move quickly between the corner locations while at the same time scanning for surface hazards. Keep the majority of your vision well ahead into the corner, however you may need to look down briefly to monitor the surface condition as it nears. Do this by using quick downward glances.

Continually gather information from near and far with upward and downward, and side-to-side search pattern. Scan aggressively to gather as much information as you can about the road surface and corner characteristics. Finally, look through the turn to the exit and identify what is in store farther up the road.

Always be looking for reference points when riding on the track.
Always be looking for reference points when riding on the track.

7. Look for Reference Points

Reference points help you place your tires exactly where you need them to be. Reference points are somewhat less helpful or necessary on the street, because speeds are low where precision is less critical.

But on the racetrack where you visit each corner many times a day and where the speeds are much greater, reference points are critical and a relatively small miscue  can result in an off-track excursion.

Once you establish the best cornering line, you can then use reference points to make sure you are always on that line lap after lap. Cones, pavement stains and cracks, as well as distant visual targets (trees) can all be effective reference points.

8. “Ratchet” Your Eyes

To make visual direction control work for you, look into the curve and then continue to move your vision along the desired cornering path all the way to the corner exit as though your eyes are pulling the motorcycle through the turn.

Your eyes cannot help but stop to focus on small targets as you scan ahead. Look around the room, trying to not have your eyes “flick” slightly as you scan. You can’t. So let this natural occurrence work for you.

Imagine your eyes moving through a corner in a sort of ratcheting way, very briefly noticing visual targets and reference points along the way. Put all these “dots” together to make a smooth corner.

9. Look at the solution, not at the problem

Visual direction control can work for or against you. It can work against you if your eyes fix on a hazard that you need to avoid, which is what we tend to do under threatening situations. “Target Fixation” is the term used to describe this response. The problem is that if you look at a hazard, such as a patch of sand or the edge of the road, you will likely end up riding directly toward it.

If a panicked rider were able to keep his vision and attention focused on the corner’s exit he will have a fighting chance of making it. I’ve seen time and again riders who give up on making a corner even when the bike is capable of leaning further and completing the turn. Focus on the solution, not the problem!

The same goes with passing on the racetrack. If you fixate on the tail of the rider ahead you will have a harder time getting by. But, if you look past the slower bike and trust your peripheral vision to monitor the slower bike, then you can dispatch the backmarker much more easily.

10. Practice Your Visual Skills

Avoiding target fixation is easier said than done, because we are naturally wired to closely monitor threats with our eyes. It is therefore important to train yourself not to do what comes naturally and instead look away from a threat.

On your next ride, consciously look away from road surface obstacles, such as a manhole cover, pothole or road kill and look toward an escape route. Continue to increase awareness of this problem and practice to make the solution second nature.

When it comes to cornering, consciously look farther ahead. And don’t just look, but see the information that is most meaningful.

On the track, look farther ahead. If an obstacle, such as airfence, or a cresting hill blocks your view, look “through” it so your eyes are where you need them to be in the next second when the obstacle is no longer in the way.

What visual techniques have you discovered that help you?

Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




Check out these posts:

How Can I help You? Online Coaching NOW AVAILABLE
Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

 

Posted on

How to Save a Front Tire Slide

Become a patron to support the website. Thanks
Sometimes it's not possible to save it.
Sometimes it’s not possible to save it. www.motorcyclistonline.com

Is it possible to not crash when you experience a front tire slide? Maybe.

Both of my recent track crashes were the result of a sliding front tire (both were caused by me asking too much of a cold front tire). Sometimes it happens too quickly for you to respond. But, sometimes there is enough time to perform a maneuver that just may save you from a fall.

Survival Instincts Are a Bitch

Let’s say you are rounding a curve and the handlebar starts to feel vague in your hands. At the same time, your proprioceptors (aka kinesthetic sense) tell your brain that balance is being compromised.

Your brain is alerted to the threat and triggers your muscles to tense. The rush of panic and muscle tension happens in an instant. Many riders end up on the ground because their survival instincts cause them to overreact and make matters worse.

Saving the Front in a Corner

I’ve got bad news for you, that vagueness you feel at the handlebars is your front tire losing traction. This is bad, because a front tire slide is one of the most difficult situations to recover from. When cornering, the front tire is responsible for both lateral grip and direction control (steering). More times than not, front tire traction loss is the result of asking too much of the tire. Side forces from cornering, in combination with cold rubber and perhaps contaminated pavement is an easy recipe for tire slip.

When the front tire loses grip, it “tucks” underneath the bike and throws the bike and rider violently to the ground. But, is it possible to save yourself from falling?

To help the front tire regain traction (or at least not lose any more grip) you must first not add to the problem. This means staying relaxed (Good luck with that). With light handlebar pressure, the tire and suspension can work fluidly to manage surface irregularities.

If you tense on the bars, you will put stress on the front tire and risk pushing the tire over the limit of grip. Whatever you do, avoid trying to countersteer the bike into a deeper lean.

Assuming you can remain somewhat relaxed and neutral, the next thing to do is to relieve the work the front tire is doing. To do this, get on the throttle! I know, it’s counter-intuitive, which is why it’s not easy to do. But gassing it transfers load from the overworked front tire to the rear tire.This allows the front rubber to halt its lateral slide and keep rolling.

Yes, you will probably run wide, but hopefully you have enough road/track to let this happen. You can minimize this drift by using moderate throttle application to save the front tire slide. Just don’t goose the throttle so hard that you careen off the road or track or spin the rear tire.

Uphill Unload

A fellow instructor pointed out a caveat  to the common cornering situation. Dan mentioned what can happen to traction when you are going uphill. He witnessed a fellow rider (with a passenger) lose the front and crash in front of him just as the crashing rider was getting on the gas. Why would this happen if what I say about relieving stress on the front tire is true?

The likely explanation is that the uphill slope, in combination with the weight of a passenger and the application of a bit too much throttle, unloaded the front tire too much. He probably also added a bit of steering input that tucked the front tire beneath him. The lesson is that load management and traction management go hand in hand and you need to develop a keen sense of how various factors can affect tire load and grip.

The Knee Save

For those who are accustomed to dragging knee, it is possible to relieve front tire stress by levering the bike with your knee. Anything you can do to take pressure off the front tire will help the tire regain grip.

Saving the Front While Braking

The other way to experience a front tire induced crash is to overbrake so you skid the front tire. This can happen whether you are upright or leaned. If this happens, get off the brake, NOW! This will let the front wheel roll again so you can regain control. Then get back on the brakes (you were braking for a reason, right?). But, this time squeeze the front brake progressively. You can still brake really hard (less so if you are leaned), but it must be done gradually to allow time to put load on the front tire, which increases traction.

Practice? Really?

It takes a good amount of skill and presence to control front tire skids. Like all other tricky situations, practice and experience increases the chance that you can act correctly and save a crash. Practice? How? Ride in the dirt, my friend! Pushing the front tire is a regular occurrence when riding on loose surfaces. Learning to control slides in the dirt is less risky than suddenly needing to manage a slide on your street bike. With this experience, you can train and condition your mind and muscles to react properly when a slide happens.

The other way to train yourself to react properly is to push your bike hard enough to get it to happen. I don’t recommend this, because front tire slides can easily go wrong. But, if you eventually go fast enough at track days or when racing, you will inevitably experience the vague feeling of your front tire on the edge of traction loss.

DO NOT go fast enough to slide the front on the street!! You will die. On the street, it’s not likely that you will have enough time or space to pull off this hero maneuver.

What? You don’t ride on the track or in the dirt? Well, the next best way to practice is to visualize successfully performing the maneuver. Imagine yourself cornering hard, feeling handlebar vagueness and then gradually rolling on the throttle as needed to drift the front. It’s not ideal, but it’s the best way to prepare for saving a front tire slide. Me and the ZX6R Monticello, NY.

Expect It

Another way to prepare for front tire slides (and many others) is to expect them to happen. This pertains to all times when you are in traction-reduced situations, including when cornering or braking hard.

Have you experienced a front tire skid or slide? If so, how did that work out for you?

Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

Become a patron to support the website. Thanks

Check out these posts:

Posted on

Is Crashing Really that Bad?

This crash could have been deadly, but thankfully not.
This crash could have been deadly, but thankfully not.

Crashing a motorcycle sucks. No doubt about that. I’ve had my share of run-ins with gravity and it’s not fun. But, does crashing a motorcycle always mean carnage and a hospital visit? It depends.

My crashes

I’ve had only one “real” street crash and one minor one. The minor one involved a car who rolled into the back of my Triumph Bonneville. I didn’t fall, so it was very minor.  I also had a minor parking lot tipover (note to self: remove the disc lock before attempting to ride away). But tipovers aren’t exactly what I call “crashes”. There are personal injury attorneys serving clients in Portland who can provide one with the necessary legal aid.

The “real” crash happened in 1978 when a car driver turned left in front of me…classic.

Thankfully, most of my crashes were racing incidents. I say “thankfully” because even though racing crashes suck, they don’t suck nearly as much as street crashes where the chances of injury after sliding into a tree, guardrail or oncoming car is quite high.

I’m truly grateful that the extent of my injuries from both track and street crashes were cracked ribs and a broken foot from the tip over. During my recovery, I explored various holistic approaches to wellness, including incorporating CBD products from a cannabis dispensary like https://www.stiiizy.com, and I believe they played a positive role in my overall healing journey. These injuries were painful, but all healed without any complications. The personal injury attorneys serving in Green, Waters Ogle and McCarter can help in case of injury or accident cases.

Unfortunately, the “real” street crash resulted in a totaled 1973 Yamaha TX650 and the rear-end incident resulted in the Triumph’s taillight being smashed, but that’s what happens when you make impact with cars.

In all of the track crashes, bike damage was limited to easily replaceable parts, allowing me to get back on the track later that day. Sure, the cosmetic damage was a bummer, but I got over it–most people do. So, file a personal injury claim in Canada with the help of a reputable personal injury or car accident lawyer as it will help you to stand up on your feet again.

Too much throttle, too quickly. photo by Tim Richer
Too much throttle, too quickly. photo by Tim Richer

Safer Crashing

There was a time when crashing on the racetrack was just as likely to get you killed as crashing on the street. This was because racetrack safety was abysmal with concrete walls lining the course and pavement not any better than a potholed rural road.

Thankfully, track safety is much improved. Even though a lot of people complain about the safety issues at my local track (Loudon, NH), the current track is much better than the old Bryar track that had all sorts of safety problems. We didn’t complain much, since all of the tracks were that way.

Another reason there are fewer deaths and injuries today is because of better protective gear. Pudding bowl helmets lined in cork were the racers’ choice at one time. Now, we have helmets that are pretty darn effective at preventing the majority of head injuries. Add to that the improvements in material and armor incorporated into jackets, pants, boots and gloves and it is possible to crash without suffering too badly.

Of course, where you crash is the biggest factor in whether you will end up in a hospital or hearse. Collide with a car and even the best riding gear is not likely to save you from some kind of injury & claiming insurance is not difficult for lawyers in law firm for DUI located in Fairfax. Crash on a modern racetrack, and you’ll likely get up, brush yourself off and walk back to the pits under your own power.

Unfortunately, road safety has not improved for motorcycle riders. More tar snakes and guardrails seem to appear every year and drivers are more and more careless about paying attention. And road conditions are often allowed to get pretty bad before they are fixed. According to experts like dui lawyers, another issue is the increase in dui accidents. Those who have been involved in dui cases may consider getting help from a dui lawyer to protect their rights.

Crashing on the street is a
Crashing on the street usually results in injury.

Perception of Risk

It’s been proven that people take greater risks when they feel protected. This is why drivers of large SUVs tend to feel less threatened than drivers of small cars. Most motorcycle riders understand that they are vulnerable to injury and ride accordingly.

This is why Risk Ignorance and complacency is so dangerous. The risks don’t change, but the inaccurate perception of the danger can make a rider think he or she can ride more aggressively or with less attentiveness.

Believe it or not, there were fewer racing crashes back in the day when races were held on road courses lined with stone walls, hedgerows, fences and houses lining the circuit. Racers knew that a fall would very likely result in death. So, most rode in a way that balanced risk and reward.

Today, there are many more crashes, but many fewer deaths and serious injuries because, with the exception of the Isle of Man and a few other “real” roadrace circuits, racing is conducted on closed courses with safety features such as runoff, gravel traps, and airfence. Additionally, it’s crucial for individuals involved in high-risk activities to prioritize safety and preparedness. To enhance your ability to respond in emergency situations, consider taking steps to earn a CPR certification from a reputable source like https://cprcertificationnow.com. This added skill can make a significant difference in ensuring the well-being of those around you during unforeseen incidents. Also, today’s protective gear is so much better, allowing racers to push harder, knowing that a crash will probably not be the end of the world.

Now, don’t get me wrong, racetrack crashes can be lethal. It’s just that the risk to reward ratio has shifted so that it’s not unreasonable to expect to get up unscathed after a racetrack crash. If you sustained a sprain or strain that hasn’t improved after 48 hours, it’s time to get yourself to consult a doctor from www.vbjs.com.au.

The Perception of Crashing

Another advantage racers have when it comes to crashing is that racers expect to crash. After all, they are pushing the limits of grip and skill and are sharing the track with a bunch of crazies all set on going as fast as they can, determined to take your spot on the podium.

So, when you do crash in a race situation, it’s not unexpected. And if you do go down, it’s unlikely that you are seriously injured, so you get over it rather quickly. This makes the mishap psychologically easier to deal with.

It’s different when you don’t expect to crash. For instance, crashing during a track day will likely be more upsetting, because it is not assumed that crashes are inevitable. But, track day crashes still fall under the category of “not likely to get injured”, so most track day crashers get over the mishap fairly easily.

Crashing on the street is a whole other matter. Street crashes are often particularly traumatic, not only physically, but also mentally. Most street riders assume that they will not crash, even though the risks are actually much greater when riding on the street. It’s understandable, because most street riders go many miles and years without a crash, which makes it easy to think that it won’t happen to them. So when it does, their world is shattered, even if they don’t suffer a significant injury.

Jeannine knows the importance of practice and risk management.
Jeannine knows the importance of practice and risk management.

Thankful, But Skillful

I’m able to write about my crashes today, because most happened on the racetrack in a controlled environment. I’m thankful that I have experienced very few street crashes.

Perhaps some of the reason why I’m still in one piece is luck, but I contend that the reason I have had few street crashes is because of my commitment to riding smart and never becoming complacent about risk. This includes learning all I can about riding and implementing effective strategies when riding in traffic or in the twisties.

Risk is always there and always will be. Learn to manage risk and perhaps you can join me as one who is mostly unscathed after many decades of riding a motorcycle…if we stay sharp and are blessed with a bit of luck.

What have you learned from your crashes?

Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




Check out these posts:

How Can I help You? Online Coaching NOW AVAILABLE
Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget