Review: Racer High Speed Gloves

otmpix.com

I ride over 2,000 track miles every season. That means I spend a lot of time wearing road race gloves. I need high-performance gloves that are comfortable as well as protective. If you want to put a wager on moto racers who may be wearing similar gloves, a platform like satta king is now up and running.

Racer’s High Speed Glove is a premium CE certified, professional-level glove for road racers and serious track day riders. Racer says this is their best selling glove.

The glove is made of cowhide with TPU hard protectors on the knuckles and there is an egg-sized protector on the outside of the wrist. The knuckles are covered with rugged SuperFabric®.  There is a wide gauntlet closure and narrow wrist closure using Velcro.

From the Knox website.

The High Speed’s palms are made from kangaroo skin with a leather grip patch and two Knox® SPS palm sliders (SPS stands for “Scaphoid Protection System”). As you can guess by the name, these sliders are designed to prevent scaphoid injuries by allowing your hand to slide rather than grab the pavement and stretch or compress the wrist.

The pinkie and ring fingers are joined with a piece of leather to prevent what Racer calls “finger roll”. I’m not sure what that is, but I imagine connecting your two smallest fingers together makes a single sturdier digit.  My Heroic gloves have the same feature.

The gloves are comfortable to wear, taking exactly zero minutes to break in. The fingers are a bit stiff, but nothing concerning. The leather is perforated and vented at the gauntlet and a little bit along the fingers. Airflow seems adequate, since I never felt that my hands got particularly hot during the hottest days on track.

Gripes? I wish the gauntlet were 1/2″ longer so it better covers the sleeves of my leathers. Also, I would like some more protection on the back of my hand, just above the wrist. My Heroic SP-R Pro gloves have a simple rigid panel that seems to be a good idea. Maybe the High Speed glove could be a bit more protective in a few places, but I bet these would do a fine job keeping my paws in one piece in a crash.

Likes? I like a lot. I like the hard Knox scaphoid sliders and the slider on the outside of the wrist. I also like the fit and comfort. The Kangaroo hide is very soft, but protective. These gloves are comfortable enough to be used on the street.

You can get the High Speed in either Black or White/Black for $280.00. That sound expensive? Well, it’s the going rate for really good gloves. Besides, your hands are damn well worth it.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!





Check out these posts:


How Can I help You? Online Coaching NOW AVAILABLE
Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

The Cure for Riding Anxiety

Become a patron to support the website. Thanks

Since few of us are masters of every aspect of motorcycling, we invariably experience bouts of low-level anxiety or even panic. According to experts from Legacy Healing in Fort Lauderdale  center, anxiety mostly sucks, but it can also be a useful tool for helping you be a safer and more proficient motorcycle rider…if you pay attention.

From my article published in Motorcyclist Magazine:

“The best riders frequently check themselves for signs of stress and then act to regain relaxed composure so they can enjoy a safer and more gratifying ride. With anxiety out of the picture, they can also identify where the stress is coming from, whether that’s a lack of confidence in their ability or trepidation about a particularly risky environment, such as a rain-slick corner or a route riddled with dangerous intersections. Whatever the source, these riders use their awareness of stress to recognize their comfort limit and then back off so that anxiety does not affect control, safety, or fun.”

Too bad I couldn’t follow my own advice.

My Story

Recently, I’ve had a series of off-road mishaps of varying levels of severity that have messed with my Mojo.

I figured perhaps upgrading to a more capable and lighter machine would help. So, I sold the sturdy and rider-friendly KLX250/351s and bought a beautiful KTM450 XC-w. I never intended to buy the KTM, but the price was right, it was in a nearby town and it was sexy as hell.

I knew from the day I bought it that the 450 was more bike than I wanted or needed. It’s not that I didn’t think I could manage the power or the edgy handling, but the fact that it was a less rider-friendly bike made my anxiety worse. Ugh.

So, I remedied the situation by buying a Honda CRF250x. It’s the bike I should have bought in the first place. It’s more like a play bike than the KTM, but more capable than the KLX. Let’s see if that was the cure.

The Test

With the confidence of a less intimidating bike I went riding with my friend Paul at his local dirt track. This area features a motocross-type sand section and some tighter technical trail stuff with some steep drops and climbs, as well as log crossings. The last time I was at his track on the bigger KTM I managed to overcome the challenging sections, but with difficulty. Going in, I totally expected things to go easier on the 250x.

Paul contemplates my plight.

Turns out that the cure was not a different bike. Sure, it helped, but the anxiety was still there. I stared at a particularly scary looking traversing hill wondering WTF? I got past it and tackled the hill several times, but was tense and on the edge of panic much of the time. The rest of the course was easier, yet I still felt anxiety.

Paul, being the supportive friend he is, told me to slow down and just roll around. I was trying to ride the way I am used to riding…sliding the rear and zipping at a decent pace. Well, that was just adding to the anxiety. Once I slowed down to a novice pace, I started having fun and things went sooooo much better.

Emotions trump Logic

So, why wasn’t I able to follow my own advice as outlined in the Motorcyclist article? Because emotions tend to trump logic. I wanted so much to overcome the fear that I pushed on instead of doing what I tell my students…slow down to reset your sense of confidence and competence.

I’ve never been as confident off-road as on pavement or on the racetrack, so I tend to think of myself as a rookie rather than the reasonably competent dirt rider I really am. By slowing down, I am reminded of my true competence. This reinforces the positive. And the more I ride this way, the faster I substitute anxiety with confidence.

By riding in complete control at all times I am (re)building a solid foundation that then allows me to climb out of this rut. If I were to fruitlessly keep pushing without stepping back, I would surely dig the hole even deeper and just reinforce the hold anxiety has on me.

The Cure

The CRF250x is more user friendly than the big KTM.

I tell my on-street students at the beginning of the day that we will be riding well within their comfort zone, becasue they can’t learn and build confidence if they are using all their attention on managing anxiety. And when it comes to my track day students, I tell them that they gotta go slow to go fast.

I believe that most anxiety can be traced back to just a few things…some are physical, like slow speed maneuvers or weak countersteering, but most are mental. Learning tricks to control the bike and read the road or trail with more confidence are keys.
 
Whether it’s street or dirt riding…Slow down so you can keep your eyes and attention well ahead of you. That way things are much easier to process. If you use too much bandwidth to manage anxiety you look down, tense at the handlebars and everything goes pear-shaped.
Of course, slowing down is only part of the cure of riding anxiety, but it’s an important place to start. You will likely also have to sharpen weak control skills that are adding to your anxiety.

Pressure to Measure

This is moments before I lost the front wheel over the high lip of a berm and gave myself some serious whiplash. I was pushing myself too hard trying to get past the intimidation I felt with the KTM.

This all sounds like solid advice, but I can tell you that it’s not easy to follow. If you’re like me, you have an established image of yourself as someone who can manage the challenges of a typical dirt (or street) ride and not be so slow as to hold up the group’s pace.

I’m also competitive, which doesn’t help. I tend to ride fast when the right thing to do is hang back and not feel compelled to keep up.

The takeaway here is to listen to your anxiety and respect it for its attempt to alert you to SLOW DOWN. Instead of forcing yourself to tackle challenges with abandon, take it easy to build back your confidence.

Ignore your anxiety at your own peril. As the saying goes: check yourself before you wreck yourself.

Share your experiences in the comments section below.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!





Check out these posts:


How Can I help You? Online Coaching NOW AVAILABLE
Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
 

 

Become a patron to support the website. Thanks

Review: 2017 BMW R1200RS

Become a patron to support the website. Thanks

After spending the better part of two weeks in the saddle of a 2017 BMW R1200RS riding the Alps and Dolomites of Switzerland, Germany, Italy and Austria, I have developed a pretty good idea of what this bike is about.

The R1200RS is Beemer’s sport touring bike that uses the ubiquitous 1170cc boxer opposed twin motor. The RS is essentially the faired version of the R1200R naked roadster. Similar bikes include the Ninja 1000, FJ-09 and Suzuki GSX-S 1000F. Or even the Motus or Energica E-bike.

You can familiarize yourself more with the specs and details of the RS at the BMW Motorrad website.

Pricing

The base price of the RS is around $15,000, but you’ll quickly find yourself nearing or exceeding the $20k mark after adding the Premium package and luggage.

The bike I rented from Moto Mader in Oberentfeld, Switzerland was equipped with the Premium package that includes among other things, Dynamic Suspension Adjustment (DSA) and Gear Shift Assist. The BMW site says the bike retails for $21,125 as it was equipped on my tour. See the screen shots for the price breakdown and a list of goodies you get for the extra $3k.

Weight

At 520 pounds wet, the RS is on the heavy side. That’s the same as the Ninja 1000 but is almost 50 pounds heavier than the Suzuki GSX-S1000F. Add another 30-40 pounds for luggage (and mounting hardware) and you’ve got a pretty hefty bike. Heck, the touring RT version is 600 pounds with luggage, so it’s not that much lighter than the full-on RT tourer, which is arguably a better package, especially with a passenger.

Engine Performance

The R1200 motor is a tractor. It produces 125 hp at the crank and 92 ft pounds of torque, so it’s no slouch. And it pulls from under 2 grand (rpm). The motor vibrates a fair amount at highway speeds, but it’s character is quite appealing. It was happy motoring down the Autobahn at 100mph, as well as pulling us up the first gear uphill hairpins.

The fueling from the ride-by-wire throttle was spot on, except for a little bit of “hunting” on deceleration on long downhills. It’s not as bad as on my Tiger 800, but I did notice it.

Shifting is reasonably smooth and the Gear Shift Assist allows upshifts without using the clutch or rolling off the throttle. The system worked great from 3rd-to-4th, 4th-to-5th, and 5th-to-6th, but was too rough when shifting in the lower gears. Clutchless downshifts are also rough, because it does not include the auto-blip feature found on the S1000RR. Still, it was nice to rip through the upper gears like a roadracer.

Handling

One word describes the RS’s handling: stable. But that stability comes at the cost of agility. The RS handles sweeping turns, both smooth and bumpy quite well, but when the it comes to tight, slow hairpin turns the RS felt cumbersome.

And slow speed maneuvers had the bike feeling unbalanced. It took me a few days to get used to the slow speed manners of the RS, which is about 2 and a half days longer than it usually takes for me to adjust to a new bike. To be fair, most of the time I had my lovely wife, Caroline in the passenger seat, which added to the unbalanced slow speed feel.

One highlight is the ESA- (Electronic Suspension Adjustment) feature. The dynamic ESA really works and makes the premium package worth considering.

I selected the “dynamic” suspension setting using the handlebar toggle switch and managed to stumble through the complex menu to select the appropriate mode for having a passenger. The bike comes with the typical rider modes (Rain, Road, Dynamic and User) which are easily accessed by a button on the right control pod.

Two-Up Performance

As I mentioned, I spent most of my time with a passenger on board. The bike has plenty of power to handle two people and full luggage. But, the RS is not the best bike for passengering. In contrast, the RT felt perfectly balanced with Caroline on the back. Go with the RT if passengers are your thing.

Riding solo, the bike is much more predictable and nimble enough for me to rip down the Stella pass with confidence. See the video below. But, the F800GT I rode would be my bike of choice from the Beemer lineup for the tight stuff.

Comfort and Protection

I chose the RS over the naked R for the extra wind and weather protection. This proved to be a good move, since we experienced some rather epic rain over five consecutive days.

The wide and relatively flat windscreen provides a decent amount of wind protection. It has a high and low setting that created little buffeting at slower speeds but was very loud at highway speeds at the high setting. Keep in mind that I’m 5’9″, so your results may vary.

The seat is quite comfortable, allowing me to be squirm-free for most of the day. I did need relief after long days in the saddle, but overall, it’s quite good. Caroline was happy with the passenger seat.

The heated grips were terrific when we encountered torrential rain and 49 F temperatures for hours on end. I envied the RT riders who also had heated seats and greater protection from the Alpine rain.

Luggage

The $1,100 optional side cases are standard BMW units that open sideways. They hold plenty of stuff and are waterproof. The latches are a bit cheap-feeling and a couple of the other riders had trouble with their topcase locks failing. We had no such problems.

Speaking of topcases, the small Beemer item was fine. But, at over $900.00 (I assume that includes the mounting hardware) I’d look for a bit larger Givi or Shad box for a lot less money.

The small BMW tankbag is secured with straps and costs a lot of bucks for what it is. It’s not waterproof, but has an inner drawstring bag to help keep things semi-dry. My recommendation: Get a SW-Motech /Bags Connection bag that is much sturdier and uses a slick locking ring system.

Compared with the RT

I switched bikes with another rider on the tour to see what the RT is like in comparison to the RS. I had been dismayed with the RS’s cumbersome two-up handling and was a bit apprehensive about riding the even heavier RT.

But, to my surprise, the RT was much more balanced. Slow speed maneuvers and negotiating the tight hairpins is a breeze. And seeing the way the solo RT riders were hustling their bikes around shows just how capable the RT is with or without a passenger. At least one rider plans to buy an RT after they got home. I can see why.

Niggle

One little thing I found perplexing is that the self-cancelling turn signals stay on too long. Long enough that I didn’t think the bike had the feature. Come on BMW.

The Takeaway

The RS is a beautiful bike, especially in the blue and white color scheme. I like the way the exhaust looks and the asymmetric headlights are cool. The bike sounds great and the motor is powerful and grunty.

I could definitely grow to love the RS, but would likely opt for a lighter weight FJ-09 with it’s raucous motor and cheaper price.

I enjoyed my time on the RS, especially after I got a better feel for it’s awkward slow speed handling. The bike rails through fast and medium-fast sweepers and hustles down the highway comfortably. And even though it’s not great in the hairpins I managed fine. Here is a video of me on the RS descending the Gardena Pass in Italy.

Tell us your thoughts below.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!





Check out these posts:


Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle

 

Become a patron to support the website. Thanks

Video Lesson: Intersection Crash

Here is another video posted by the rider who was involved in a crash at an intersection. See more video Lessons here.

According to Ronald A. Ramos, one thing different about this rider is that he is taking the time to self-analyze his role in the crash and explore how he could have done better. Kudos Hans Solo!

I want to stress that in the real world, under battle conditions, we humans will make flawed decisions. It’s what we do. The takeaway is to have effective strategies so we can do all we can to avoid needing to use superhero skills…assuming we have them at our disposal. Hans should be commended. He is doing the hard work of looking in the mirror to evaluate what he could have done differently.

That said, I have a different take on what could have helped, so I’ll add my .02 about how things could possibly have turned out differently.

Monday morning quarterbacking can come off as smug, but I don’t want to miss an opportunity for my readers to learn from others’ mishaps if we can.
Take a look at the vid. I’ll wait.

If you can’t see the video:
Imagine a rider approaching a cross-street intersection with a white car waiting to turn left across his lane in a dedicated left turning lane. There is a gray car located at 10:00 from the rider who is also approaching the intersection. The rider accelerates to pass the gray car on the right before the intersection when the white, waiting car cuts across both the gray Nissan and the bike. The white car zips in front of the  gray car and the bike hits the white car broadside.  Sorry the video isn’t available.


OK, so here are my thoughts:

Lane Position & Conspicuity

Using the Dark Blue-Gray Nissan as a “pick” or blocker is often a good plan, but it’s a mistake to do it at the expense of being seen. In this case, Hans moved into the right lane to put the Nissan between him and the left turning cars. The problem is that the white car couldn’t see him as well (not that the driver was even looking) and Hans couldn’t see the white car as well. We call the blue-gray Nissan an eclipse vehicle.

Add to that the fact that the road was curving (see :45) in a way that makes Hans even less visible to the oncoming white car and you can see the problems with this particular lane position.

One possibility is if he had stayed in the left lane behind the Nissan, he could have seen the white car move earlier. But then if the Nissan hit the white car (they missed by inches), Hans would have needed to be far enough back to be able to brake in time to not rear end the Nissan. In the end, he made a fine decision, but the driver of the white car did something so unexpected that it’s tough to blame Hans for this decision.

Vision

Lane position plays a huge role in terms of being seen and being able to see ahead. Greater following distance would have allowed Hans to see the movement of the white car earlier. And remaining in the left lane (with lots of following distance) would have allowed him to see past the Nissan.

Because intersections are so dangerous, my eyes would be flicking around while my wide vision would be looking for any peripheral movement. You can see the white car move at 1:58. Impact comes at 1:59, so because of his speed he had almost zero time to react.

Speed & Stopping Distance

Hans wasn’t riding particularly fast, but his speed could have been better for the situation. Hans says he slowed (and downshifted) before impact, but I don’t hear any significant change in RPM…although he clearly brakes just before the crosswalk. What I saw was a seriously dangerous situation ahead that would have had me rolling off the throttle earlier and covering my brakes.

For reference, trimming just 5 mph off of 40-mph travel speed requires about 20 fewer feet to stop. Add to that the reality of perception time and reaction time that further increases actual stopping distances and you can see how much speed affects safety. Read my article in Motorcyclist about reaction time and speed.

So, how much time did Hans have to stop? A Nissan Altima is about 16 feet long, so at the time of initial brake application (seen by the front end dive) I estimate the distance between the rider and the white car to be about 40 feet. The speed he would need to be at to get the bike stopped in time is about 25 mph! See this chart from the MSF that documents that a VFR800 needs about 36 feet to stop at 29mph. This is with a trained rider in a controlled environment.

Keep in mind that Hans is likely to be an average rider who rarely (if ever) practices emergency braking skills. This means he, like most average riders, can only achieve a deceleration rate of 0.6 g’s even though most bikes are capable of 1.0 g. Add to that the reaction time of the average human is 1.3 seconds and you can see the problem.

Expect the Unexpected

The point of this article is for us to consider possible solutions that would have prevented or at least minimized the effect of the driver of the white car’s screw up. In this particular case, the white car cut off a large four-wheeled vehicle, so he would have surely cut in front of a motorcycle. This is an extreme case of a driver totally screwing up and is hard to believe. But, that doesn’t mean we don’t still do all we can to prepare for the unexpected. Do what you can to not let it happen to you!

That’s about all I got. I hope you heal fast, Hans.

Share you thoughts and comments below.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




Check out these posts:


Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

Review: Energica EGO Electric Motorcycle

Become a patron to support the website. Thanks

The future of motorcycles? The jury is still out. But, the technology keeps moving forward. Battery range and charging capabilities are improving and you can expect usable performance. The weight issue still needs to be addressed.

Thanks to Adam at Rocket Moto in Nashua, NH for the loan.


Here’s a narrated video to see and hear what the bike sounds like. Details and more thoughts are below. Enjoy.


A few details:

$25,000 base price, $32,600 as tested – Price Reduced from original cost of $40k as tested!

MOTOR– Permanent Magnet AC, Oil Cooled

MAX SPEED- Limited at 240 km/h (149mph)

HORSEPOWER– about 135 hp

WEIGHT– About 580 pounds

TORQUE- 195 Nm (143 ft lbs) from 0 to 4700 rpm

RIDING MODES- 4 Riding Modes: Standard, Eco, Rain, Sport 1)
4 Regenerative Maps: Low, Medium, High, Off

PARK ASSISTANT- Reverse and Forward (1.74 mph Max Speed)

BATTERY CAPACITY-11.7 kWh

LIFE- 1200 Cycles @ 80% Capacity (100% DOD)

WARRANTY- 3 years / 50.000 km

RECHARGE- 3.5 h (0-100% Soc) Mode 2 or 3 Charge (220), 8 hours using 110,
30 min (0-85% Soc) Mode 4 Dc Fast Charge

The Energica website.


Street Tested

The EGO is in its element on the sweeping, twisting rural roads near my home in the Berkshire Hills of western Massachusetts. The EGO may have felt awkward and even a bit slow on the racetrack, but it comes into its own at street speeds.

Power

The Energica rips! At least it does up to about 80mph. After that it starts to flatten out significantly. But you’ll get to 80 very rapidly with all 143 foot pounds of torque on tap from the get-go. The motor spins up quickly and can take your breath away at first. Thankfully, the ride-by-wire throttle is impeccably controllable. The rush is amplified by the almost angry whistling sound that builds to a crescendo.  It’s hard not to notice the contrast of speed and sound coming from a bike that a moment ago sat in total silence.

Rider Modes

The EGO has 4 rider modes:

  • Eco- This mode neuters the power to the equivalent of a 500 Ninja and limits speed to just over 55mph. That may sound sucky, but I would be glad to have it when there is no power supply nearby and I still have miles to go to get to one. Eco mode would be absolutely fine for any city or suburban riding, with plenty of git up and go. Just be sure to witch to Standard , Wet or Sport modes before hitting the highway.
  • Standard- Now we’re talkin’. Twist the grip in this mode and hang on. The bike sharply snaps to attention, but is quite controllable as the power builds in a linear manner.
  • Wet- From what I can tell, Wet mode is a softer sibling of Standard mode. It still jumps forwad nicely, but the torque seems slower to build. Sounds like a good thing to have in rainy weather.
  • Sport- Gitty Up! This mode is the E-ticket ride. Sport mode seems more urgent and angry compared with Standard mode. Like the other modes, power still flattens out at about 85mph. No problem. The rush of getting there is enough excitement for most.

Regenerative Modes (Engine Braking)

There are 4 modes to choose from that controls the amount of regenerative engine braking the bike produces.

  • High- Close the throttle all the way in this mode and you’re launched forward. The blue lights on the instrument cluster tell you that you’re recharging the battery when this abrupt deceleration occurs. That’s good, but I can envision times when having that much engine braking could cause loss of rear tire grip, so it’s smart to select a softer setting in the rain or on gravel. That said, It’s a great setting for helping to control speed on steep hills with hairpin curves thrown in. Uphill hairpins are better handled with the Low mode.
  • Medium- This mode is a good compromise between charging your battery and abrupt deceleration. his mode feels most like a conventional 2 cylinder internal combustion motorcycle.
  • Low- This mode was great on tight uphill hairpins where gravity already provides enough force to slow the bike. This mode feels most like a conventional 4 cylinder internal combustion motorcycle.
  • Off- You can turn off the regenerative feature, which would be my choice for slippery surfaces where it’s better to rely on the brakes to manage traction.

Brakes

What’s to say, except Brembo makes the best brakes out there. It’s good to have these babies on board to slow down this relatively heavy, fast machine. Feel is good and controllable. That is all.

Handling

Handling on the street is great. It’s stable and precise with no tendency to stand up mid-corner and when trailbraking. Keep the tire pressures at the 42/42 and you’ll be happy.

Ergonomics

The riding position is sporty like a small 1990s Ninja ZX-11. Or maybe a cross between a ZX-11 and my old 2005 ZX636. Yeah, that’s it. The bars are low and the pegs are high. The seat is hard, but not too bad for the amount of time and riding distance the battery will afford. It feels compact with the small windscreen that deflects wind only away from your mid-chest.

Battery Life

One thing you’ll have to get used to is energy management. Think about having a bike with a 2-gallon gas tank and then imagine not having any gas stations readily available. And then imagine needing hours to fuel the bike. That’s what you need to think about when you ride an electric motorcycle.

3.5 h (0-100% Soc) Mode 2 or 3 Charge (220), 8 hours using 110-  You can recharge if you carry the somewhat heavy charging cord with you all the time and can find an available 220 power outlet while you’re putting a burger in your pie hole at some rural lunch spot. But don’t rush because with a 220 charge, it takes 3.5 hours to get a full zap. Normal 110 takes 8 hours!

30 min (0-85% Soc) Mode 4 Dc Fast Charge- If most of your riding is in suburbia where you have Tesla charging stations hanging around, you can get recharged to 85% in about 30 minutes. Unfortunately, the are no Fast charging stations where I ride, so I’d need to carefully plan where to turn around to make sure I can make it home.

The range is claimed to be about 100 miles (120 on Eco mode). I did about 70 miles and used up 70% of the battery, so maybe that’s fairly accurate. To be fair, I did several full-throttle bursts and only a little Eco mode riding.

The Nutshell

I really enjoyed my day on the Energica. The more I rode it the more I like it. My neck and wrists were tired after using up 80% of the battery, but the buttery smooth power offset that discomfort. It’s a lot of jingle, but if you want a really cool looking bike that is unique and a ball to ride, maybe the Energica will charge you up.

Updates

Energica reduced the cost of the EGO significantly since I tested this bike. The base price is now $25k with the premium Ohlins suspension, carbon kit and OZ wheels upping the price to $32,600. Still a lot of money, but not out of line with other premium models still being propelled by internal combustion engines.

Also, Energica announced that they will be the sole supplier for the upcoming FIM Moto-e World Cup starting in 2019.

Track Tested

I was able to do a couple of laps on the Energica Ego. The bike is a terrific street bike, but felt heavy at track speeds. Part of the issue was that I lowered the tire pressures to a typical 30-rear/30-front and the bike didn’t like it. The bike handled better with 35 pounds, but would have been even better with the full street pressures that would better support the weight.

Also, I apparently used up enough juice to limit the top speed from the 110 mph of the first session to a maximum of about 80 mph during the second session. A recharge is needed to keep access to the top speed.

Besides that, the bike was a hoot to ride. Take a ride with me:

 


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




Check out these posts:


Stay Informed: Subscribe NOW!
Be a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle

 

Become a patron to support the website. Thanks

Video Lesson: How to Manage Downhill Turns

IF YOU’RE LOOKING FOR THE ENERGICA REVIEW, CLICK HERE. SORRY FOR THE MESS UP.

There is nothing like video to help demonstrate cornering techniques. Ride along with me as I explain cornering and the nuances of managing a downhill turn, including trailbraking.

This is the sort of cornering techniques we work on during on-street training where student hear my comments in real-time using Bluetooth communicators. If you’re in the Northeast, consider signing up for a private training day or a group training tour. I bet I can help you with your cornering.

-Ken-

I have a lot of other videos on my YouTube channel.

Share you thoughts and comments below.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




Check out these posts:


Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

 

Video Lesson: Cornering Finesse

There is nothing like video to help demonstrate cornering techniques. Ride along with me as I explain cornering and show some of the nuances of body position, cornering lines, countersteering and visual skills.

This is the sort of cornering detail we work on during on-street training where student hear my comments in real-time using Bluetooth communicators. If you’re in the Northeast, consider signing up for a private training day or a group training tour. I bet I can help you with your cornering.

-Ken-

I have a lot of other videos on my YouTube channel.

Share you thoughts and comments below.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




Check out these posts:


Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

 

Video Lesson: Learn by Following an Average Rider

Here’s a video of me commenting while following an average rider through a twisty road. I point out the rider’s body position, cornering lines and throttle timing, and comment on how he could do better. Notice his mid-corner adjustments. This is an indication of several cornering problems that are correctable. This is the sort of cornering detail we work on during on-street training where student hear my comments in real-time using Bluetooth communicators. If you’re in the Northeast, consider signing up for a private training day or a group training tour. I bet I can help you with your cornering.

-Ken-

I have a lot of other videos on my YouTube channel.

Share you thoughts and comments below.


Check out these posts:

Become a patron to support the website. Thanks

Tips for Getting Your Bike out of Winter Hibernation

This article covers the most basic maintenance points for getting a bike ready for another season of riding. If you’re a smart veteran rider who wants to elaborate, please add your comments below so we can all learn from your wisdom.

Those of us who live where the weather blows cold put our motorcycles under cover until the frosty temps subside. And that time of year is fast approaching.

Before taking your first ride you’ll need to make sure you and your motorcycle are up to the task. Hopefully, you put your motorcycle away so it takes minimal effort to bring it to life after its long winter nap. If not, you may be in for some frustrating downtime.

General Maintenance

With the help of a motorcycle owner’s manual someone with moderately competent mechanical skill can perform most of the tasks I’m about to discuss. For tasks that are not covered in your owner’s manual, you’ll have to consult a moto-smart friend or your dealer’s service department.

Fuel System

Riders who park their bikes without adding fuel stabilizer to the gasoline are in for a heap o’trouble. The problem is that old fuel turns into a gooey varnish that can clog the small passageways in the fuel system. This is a significant problem on motorcycles with carburetors, but even fuel-injected bikes can be affected.

If you neglected this task you may be looking at the time and expense of a thorough fuel system cleaning. If the gas in your tank is old it’s best to resist starting your motorcycle. Instead, drain the old fuel from the tank (and drain the carburetors if applicable). This can prevent stale gas from circulating through the system. If your bike runs poorly even after draining the gas, consult a mechanic and store your bike properly next time.

Air Filter

Rodents seem to think that air boxes are the perfect place to build their nests. Look for clues like partial acorn shells or shredded fabric or paper. Even if you don’t see these telltale signs, it’s smart to get eyes on the filter. Unless you replaced the filter within the last year or so, you might want to have a new one on hand and just swap it. If the filter is in tact and doesn’t look too discolored or dirty, you an try to remove it and clean it with compressed air.

Too worn? The tire on the left still looks good, but it was getting old, so new rubber was mounted. Read the code on the sidewall to find the manufacture date.

Tires

Tire pressure will drop significantly over the winter and nothing affects handling and wear more than very low tire pressures, so be sure to put a gauge on those stems before the motorcycle rolls out of the garage. If the tread is worn near the tread-wear indicators or if the tires are older than 5 years (no matter the tread depth), I’d replace them. Read the date code on the sidewall. Example: 0415 mean the 4th week of 2015.

Drive Train

While you’re down there, check drive train wear. Sprockets should show no significant signs of hooking and the chain should not pull very far away from the back of the sprocket. Replace the chain and sprockets as a set if necessary. If all looks good, then check the adjustment and give the chain a good cleaning an lube (this should have been done before you stored it…just sayin’). Then be sure to perform a more thorough lubrication after the chain is warm.

Those with shaft drive need to make sure your fluid doesn’t need to be changed or topped off and check for any leaks.

Engine Fluids

Check your oil level, or better yet, change the oil and filter if you didn’t do it before tucking your bike away last fall. Old engine oil contains acids that are best removed. If your bike is liquid cooled, check coolant levels, including the fluid in your overflow tank (see your owner’s manual).

Brakes

Brakes are obviously an important system to maintain. Squeeze the front brake lever and press on the rear brake pedal to feel for a firm application. Look in the sight glass or in the brake master cylinders to see that brake fluid levels are good. The fluid should be like watered down apple juice. If the fluid is any darker, then plan on replacing it soon.

Grab a flashlight and take a close look at how much brake pad material there is remaining. Most brake pads have a notch cut into the pad as a wear indicator. If in doubt, replace the pads. It’s cheap insurance.

Battery

Weak or dead batteries are another common mechanical issue that can stand in the way of reviving a motorcycle after a long period of dormancy. Hopefully, you kept your battery charged with a Battery Tender. If not, then you will likely have to charge the battery before it will start the engine. If it will not hold a charge, then a new battery is necessary.

Lights, Cables & Fasteners

Check that all of your lights are operational: front and rear brake light switches, turn signals, tail light and headlights (high and low beam).

Confirm that the throttle and clutch cables (if applicable) operate smoothly before heading out. Finally, go around the whole bike putting a wrench on as many fasteners as you can to ensure they are tight.

Awakening the Rider

Now that you’ve taken care of the motorcycle, it’s time to think about preparing for your first ride. Remember that your brain and muscles have deconditioned over the winter.

Some people begin their season by taking a refresher course with their local motorcycle-training program or with an advanced rider training program. But, at the very least, take some time to brush up on your emergency skills in a parking lot. Whether you choose to attend a formal rider course or go it alone, get in the game by practicing some cornering and braking drills like the ones in the RITZ DVD.

Spring Roads

Even if you and your bike are fully ready for the new season, remember that the roads may not yet be motorcycle-friendly. Road salt is used extensively in snowy regions to keep roadways ice-free. A dusting of salt can decrease traction, so reduce speed where heavy concentrations of salt are present.

Sand is also widely used to combat slippery conditions and we all know how hazardous sand can be for a two-wheeler. Keep your eyes peeled for sand and avoid it whenever possible.

Roadways take a lot of abuse from snowplows scraping the surface and from the effects of repeated freezing and thawing. Expect surface hazards during the early spring until the earth thaws and the road crews can repair the scars.

Inattentive Drivers

Perhaps most important is to remember that drivers aren’t used to seeing motorcycles on the road. You’ve got to be extra vigilant when riding in traffic by using strategies for being seen.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




Check out these posts:


Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

 

Long-Term Review: 2016 Triumph Tiger 800 XRx

Become a patron to support the website. Thanks
2016 Triumph Tiger 800XRx
2016 Triumph Tiger 800XRx

The 2016 Triumph Tiger 800 XRx has spent this past summer as my instructor bike (both on-street and off-road), sport tourer and general go-to machine. After putting almost 9,000 miles on the ODO since March, I can now offer an in-depth review of this bike.

As a contributor to Motorcyclist Magazine and lead instructor at Tony’s Track Days, I have the opportunity to ride lots of different motorcycles. However, I get only a short amount of time in the saddle of these bikes.

During a on-day press launch or track session I get immediate impressions of power delivery, suspension compliance, fit and finish and ergonomics, but that’s about it. After putting 9k on the Tiger in all sorts of conditions I can share a comprehensive review.

Why the Tiger?

dual-sport-static The Tiger is versatile! It is capable of crossing the country, commuting, scratching around at a track day and riding on some pretty gnarly dirt roads and trails. While the 800 is a Swiss army knife, it is a compromise. The Tiger is a fun street bike that can keep up with most supersport bikes in the hands of a good rider at reasonable speeds. It is also a comfortable traveler that can handle a decent load of luggage and even a passenger.

As an off-road mount, it is best suited to mostly graded fire roads, but is surprisingly capable managing rocky trails. As with all heavy ADV bikes, you’ve got to be smart about what you’re getting into. I tackled a rather steep and rocky bit of single track trail that I handle easily with my KLX250s, but was a handful on the Tiger. I made it, but it coulda been ugly if I had fallen, since I was alone with no cell service.

The Tiger encourages discovery. The Tiger expands the number of places I can ride, by a huge margin. The 800 is totally at home navigating the many unimproved roads and tight paved byways that snake through Western Massachusetts where I live. I can ride 100 miles of mostly dirt roads and stay within one hour of my house! Lucky me.

There are other machines that also fit the bill; the BMW F800GS, Kawasaki KLR, the super-sized BMW R1200 GS or the new and awesome 2016 Tiger 1200 Explorer.  I chose the Tiger 800 for it’s features, lighter weight and reasonable.

Why the Roadie Version and not the XCx?

Mitas-poseI debated getting the more off-road worthy, spoke wheeled and taller XCx. But, I opted for the Road version (XRx) because I thought the bike would be spending 90% of its time on pavement. I also knew that the XR would be more than capable of the dirty riding I planned to tackle.

Since I am spending more time off-road than I expected, I probably should have gone with the XC. The XC is perfectly capable of long street miles and more importantly, it comes with adjustable WP suspension. Also, the XC comes with many of the things I’m ending up buying for the XR anyway, including engine, sump and radiator guards. Also, the spoked wheels and the 21 inch front wheel are more off-road friendly and more durable. Although, I’m happy to not have tube tires.

Here’s a long video review of the Tiger.


Let’s break down the review into components.

Engine

I love the power characteristics of the three-cylinder motor (based on the Street Triple motor). It has a nice combination of spunk and character with just the right kind and amount of vibration that tells you you’re straddling a machine. The vibes are never annoying. As a matter of fact, the bike is surprisingly smooth…smoother than my 2012 Street Triple R.

The whistling/snarling sound of the motor is unique. While an aftermarket exhaust will decrease weight and make for a nice sonic impression, I am perfectly happy with the way the stocker looks and sounds. Besides, I’m a proponent of quiet exhausts and I have better things to spend my money on. Read about all the accessories I put on the Tiger.

The triple is a terrific street engine, but it’s not so well suited as an off-road motor. It’s a bit too RPM-needy compared to a twin, like a F800GS. While the motor is easily controllable, it doesn’t exactly plod along the way you need an off-road motor to do from time to time. I found the Explorer 1200 to be better at slow speed plodding than the 800, partly because the ample torque was always on tap, whereas the 800 needs some revs. I’ve gotten used to it, but it is the one area where a BMW might be a better choice.

The engine has given me zero trouble, and if my Striple is any indicator, it will be reliable as a stone.

Power Delivery

As far as power delivery goes, the ride-by-wire throttle is super-light and takes some getting used to. When I first got the bike, I struggled to calibrate my right hand to keep the throttle steady. I’ve since learned to manage the sensitive throttle just fine, but I wish there was a simple way to increase throttle tube resistance.

Part of the reason the light throttle isn’t a big problem is because the fueling is very good. One of my pet peeves is snatchy fueling and this is a big reason why I rejected the FJ-09 as a contender. One area where the Tiger’s fueling falls short is when descending long hills, the fueling “hunts” while decelerating under engine braking. It’s not that bad, but it annoys me.

The Tiger comes with Traction Control (TTC) that can be set to either “Road”, “Off-Road” or “Off”. Road mode enables full TTC, whereas Off-Road mode allows more wheel slip. Sometimes even the Off-Road TC can intervene too much when climbing rocky or washboard surfaces. Thankfully you can turn it off. See more about Rider Modes below.

Clutch and Transmission

The clutch is light and progressive for easy launches and the transmission is flawless (it is sourced from the Daytona). I can launch smoothly from a stop and perform clutchless upshifts with ease. The ratios are just fine for street riding with the engine spinning around 5k in top gear at highway speeds, allowing plenty of zip when accelerating. The clutch lever is adjustable and neutral is easy to find. Not much more to say.

Brakes

The twin piston Nissin brakes are nothing special. They aren’t radial mount 4 piston units found on higher end machines like the Street Triple R, so they don’t provide exceptional feel and aren’t terribly powerful, but they don’t need to be. Instead, they are well-suited for the mission of slowing a 500 pound ADV bike with predictability and control.

The Tiger comes with ABS that can be set to either “Road”, “Off-Road” or “Off”. Road mode enables full front and rear ABS, whereas Off-Road mode disables ABS at the rear wheel and allows more wheel slip in the front. I don’t fully disable ABS. I like ABS.

The front brake lever is adjustable for reach and of course you can rotate the perch on the tubular handlebar to get the right angle for your primary use. I position my lever slightly low for street riding (sitting), but it ends up being a bit too high when standing off-road.

The rear brake has decent power and control and the pedal has a step up on the inner edge to allow easy use when standing up. Just rotate your right foot inward (pigeon toe) to use the tab.

Foot Pegs

The Metzeler Tourance Next tires did okay on the track.
The Tiger did great on the track, especially after I took off the peg feelers.

The foot pegs are positioned perfectly for sitting and standing. The peg size is broad enough for reasonable comfort and stability when standing. The rubber inserts can be removed by simply pulling them off. This helps for off-road conditions where you need the metal serrated teeth to grip into your boot soles. Getting them back on takes some fussing.

The Tiger has one strange design flaw. Surprisingly, the passenger pegs are mounted to frame brackets that are welded to the non-removable subframe. This means that a tipover or crash could break the bracket and ruin the whole frame. The Explorer 1200 has bolt-on passenger peg brackets.

The pegs are located low enough for all sensible street riding, but are a bit low for more extreme cornering. I rode the Tiger at a track day at Loudon and after a few sessions of grinding the peg feelers, I removed them.

Suspension

The forks are the weak link in this bike. As I mentioned earlier, I really wish I had the adjustable WP suspension. It’s not that the non-adjustable upside down Showa forks are lousy, it’s just that I’m a bit of a suspension princess and non-compliant suspension really annoys me.

Yankee Beemers grass Moto-Gymkhana
Yankee Beemers grass Moto-Gymkhana

The bike manages bumpy roads and off-road surfaces just fine and is always stable, in control, and handles nicely in corners. So, what’s the problem? Well, the forks tend to jackhammer over ripples and small bumps on smooth pavement. Either the forks have a lot of static friction (Stiction) or the compression damping is too high to allow the forks to respond to these small irregularities.

Off-road, the suspension is great. It manages sharp rocks fine at a moderate pace and handles front wheel lofting, but expect serious bottoming if you plan to do any sweet jumps. At the Yankee Beemers Rally, I participated in the grass Moto-Gymkhana where the fast perimeter course included a jump and the inevitible landing. Also, the landing off the teeter totter resulted in significant seismic activity.

Rider Modes

screen-shot-2016-11-17-at-9-49-41-amI mentioned ABS and TC settings above, but there are also Power Delivery (MAP) Modes to discuss. The Tiger has 4 MAP Modes: Rain, Road, Sport and Off-Road. See the pages from the Owner’s Manual on the right for details about how they differ.

To change various modes you have to reach to press the “M” button on the dash and then close the throttle and squeeze the clutch for it to take. FYI, the off-road mode will revert back to the last road mode if you turn off the key, which is why I often shut off the bike using the kill switch if I’m going to stop for a minute to, say, take a photo.

screen-shot-2016-11-17-at-9-49-51-amFrankly, I could do without the MAP modes. Sure, there is a slight difference between each mode, but it’s subtle. I tend to keep the bike in Road Mode most of the time, even in the rain, and the Off-road MAP seems no different than the Road MAP. The fueling on the Tiger is so well sorted that I find it unnecessary to switch to a “softer” setting.

And the “Sport” MAP is not really that much sharper than the road mode. I would not consider the base XR, because I couldn’t do without adjustable/switchable TC for off-road riding.

Comfort

The Tiger features the ideal comfort package; high tubular handlebars that are adjustable for angle and height; a “Comfort” seat that is one of the best I’ve used; great legroom. Yet, I’ve never had more trouble being comfortable on a motorcycle.The thing is that I get a nasty cramp between my shoulder blades almost immediately.

I added Rox risers, rotated the bars in every conceivable way, with no improvement. It was only recently that I determined that it is my personal anatomy to blame. Not only is my hunchback posture a likely problem, but also I broke my collarbone last year which seems to have messed up my symmetry enough to cause this cramping. The cure is to stretch the pecs to regain the symmetry and strengthen my upper back. Stay tuned.

When standing, the side panels at the rear/bottom of the tank cause my knees to splay out more than I like. This causes a slight imbalance that I have to make up for with my arms and back, which is tiring after about 6 or 8 miles of rough off-road terrain. The Explorer 1200 is better because the area where the seat meets the tank is narrower.

The Tiger 800 is a tall bike. Its adjustable seat height is 33″ at its low setting and 33.8 ” at the higher setting. (a Low seat version is available with a range of 31.1″ and 31.9″). I am 5′ 9″ with a 32″ inseam and am able to touch with both feet touching.

Miscellaneous

Electronic cruise control is cool. It’s useful on highway trips and when I want to zip a vent with my right hand without stopping. However, I don’t use it as much as I thought I would. It’s very easy to use and works perfectly, though. Pro Tip: use the rear brake to disengage the cruise control to avoid the abrupt deceleration that occurs if you twist the throttle off to shut it off.

The Adjustable Windscreen works really well for me. Some people complain that it wobbles a lot and doesn’t manage wind as well as they’d like. I have no problems at all with the stocker. The screen is moderately adjustable, but not too much, so I added an adjustable MRA Spoiler blade, which makes the stock shield more versatile.

Accessories and Luggage

I wrote an article on accessorizing the Tiger. Read it Here.

Tires

tiger-mitas-oem
Mitas 50/50 tire on top. Metzeler 90/10 tire on bottom.

The stock Metzeler Tourance Next tires are fine for most people. I did a track day on them and they stuck, but delivered very little feel. This is expected because a 90/10 tire is designed to handle the rigors of rocks and such and is typically stiff with less emphasis on pavement performance.

For the last 6,000 miles, I’ve been rocking the 50/50 Mitas E-07. I wrote a review of the Mitas E-07 50/50 tires. In a nutshell, these tires are great and allow me to go places I never thought I could. For the Tiger Roadie, order the 110 front tire to avoid the ridiculous oversteer. Order the standard (not Dakar) version for the 800.

How is it to Ride?

Slow speed Maneuvers

The Tiger is mostly easy to ride but is cumbersome at a standstill. Once you get the bike rolling at about 5 mph, then all is well, but as soon as you go below that speed, the bike turns into an awkward, top heavy beast. Unlike ADV bikes with a lower center of gravity, the Tiger carries it’s weight up high. The engine is mounted high to give ground clearance. Mounting the 5.3 gallon fuel tank on top of that doesn’t help. This all makes for a bike that wants to topple over at standstill. It doesn’t help that I have a top box and tankbag.

That doesn’t mean the bike can’t do tight U-turns. It absolutely can. You just have to get up to at least 3- 5 mph and keep it there. 7 mph is better. The higher speed means you have to lean the bike over more to tighten your arc without slowing down. Learn how to ride slowly by reading this article.

Steep, slippery and rocky...a bit difficult for the Tiger.
Steep, slippery and rocky…a bit difficult for the Tiger.

Off-road

The Tiger is an absolute hoot on dirt roads and dual-track trails. I’ve done some bony hill climbs and rocky descents and tackled terrain I didn’t think possible on a 500+ pound motorcycle. But, the sheer size of the bike makes me a chicken when riding in sand, slimy muck and deep loose gravel. The fact is that the high weight causes the front tire to plow into the soft surface. The solution is to be on the gas. That’s why big ADV bikes tend to struggle when descending and are better at ascending where you’re on the gas.

The problem is that all that weight has inertia that will get you into trouble real quick if it starts heading in the wrong direction. A mistake on a 250 pound dirt bike can go almost unnoticed, but not with these ADV beasts.

Stay away from really mucky, loose terrain and you’ll have a blast. Oh, and be sure to ride with friends in case you get horizontal. And learn how to pick up your bike by yourself, as well. I strongly recommend you get some off-road training before venturing off road on your ADV machine.

Corner Scratching

The Tiger is a little bit dirt bike and a little bit sport bike. Even with the 50/50 tires, I can pretty much keep with any sportbike ridden by an average rider. I had a great time on Deal’s Gap and at a track day. While it has it’s limits, the bike railed through the turns with good stability and decent precision. The 19″ front wheel helps with high speed pavement stability compared with the 21″ front wheel on the XC.

Traveling

The Tiger is a champ on the highway. I rode the lower half of the Blue Ridge Parkway and put on several highway miles. Mount a tankbag, sidecases and a windscreen spoiler blade and off you go.

The Tiger 800XRx has proven to be a terrific motorcycle that has expanded my riding immensely. I hunt for roads that I’ve always wondered where they went; roads I never would have ventured on with the Sprint.  I’m happy that I own the Tiger and will always have an Adventure bike in my garage.

I did a bit of two-up riding with my wife, Caroline while in NC. We decided to spend a day doing the “Gravelhala” that mostly parallels the Cherohala Skyway. Since her z750s wasn’t a great off road bike, she jumped on the back and we took off. Overall, Caroline liked the flat, wide seat and the large grab rails. The rubber footpegs we nice, too. She really enjoyed having the top box to lean against for the bit of road riding we did together. Overall, it’s a good mount for a passenger.


 

Become a patron to support the website. Thanks

5 Tips from an Aging Sport Bike Rider

Become a patron to support the website. Thanks
Graham and Dan. I'm not saying their old, but where is their hair?
Graham and Dan. I’m not saying they’re old, but where is their hair?

Note: This article pertains to all types of riders. So, please read on.

What happens to sport bike riders when they get old? Most people think of sport bike riders as young men in their 20’s or 30’s. A lot of people don’t consider that sport bike motorcycle riders, who may be up for betting on sites like 아리아카지노, are often in their 40’s, 50’s, 60’s, or even 70’s.

It’s  assumed that those crazy riders on their rice rockets are young, testosterone laden young men. And this stereotype has some truth to it, since the attitude and ergonomics of sporting machinery suggests a fast and young lifestyle. But, many older riders do keep a sportbike in the garage if their body can handle the demands on aging bones, muscles and soft tissue.

A lot of sport bike riders move gradually to more upright machines with less demanding ergonomics and softer power delivery. But, if you look around at any sport riding gathering, track day, or even club race event, you’ll see that the median age is what is often considered over the hill. You’ll also see that these elders are often some of the most skilled riders on the road and the fastest on the track.

While the hair beneath the helmet may be gray, the desire to express mastery at the handlebars is as strong as ever. I’m not speaking for all sport bike elders, just the ones I know who keep at least one high-performance bike in their stable for those days when the back is feeling okay and the passion for a rip requires a razor-sharp tool.

Ken-smile
I’ve got a few more years behind the handlebars.

At 57 years old, I’m now qualified to speak from the perspective of a once young road racer and sporting street rider. Thankfully, I happen to have a slim physique, which makes me able to climb onto a sport bike with relative ease. I am also of average height so high rearsets don’t bother me. This makes riding a sport bike possible.

Pull up a Chair, Son

There are a lot of things I could share about aging. But, there are a few notable observations I think are worth mentioning.

See the complete list of Riding in the Zone articles here.

1. Ride Smarter

Tony, Ken and Graham. Older than many, not as old as some.
Tony, Ken and Graham. Older than many, not as old as some. Yes, this is the photo “borrowed” by whoever made that video that went viral.

When I’m on a motorcycle, I can step back and evaluate whether the speed I choose to ride matches my mood and personal limits, as well as the limits of the road or track, the weather, etc. While there are times when my inner squid emerges, I am much less prone to riding beyond the limits. I am closer to the edge of the risk:reward ratio than when I was young and felt invincible. Now, I ask myself whether riding a certain way is worth the possible aggravation.

Top photos © Ken Condon

Bottom photo © Annalisa Boucher

2. Ride more Efficiently

How is it that I can get through a two day track day event riding multiple groups and still get up the next day and go to work? I see a lot of track day riders many years my junior pack up halfway through the afternoon because they are too tired to go on anymore. How am I able to do this? It’s not because I’m in great shape.

It’s because I’ve learned to ride efficiently. This means hanging off the bike only as much as necessary to achieve the goals of keeping the pegs off the pavement and the tires in their sweet spot and perfectly loaded for maximum traction. It also means being relaxed as much as possible. Not only does this help my stamina, it also allows me to feel the tires and chassis so I can “listen” to the bike as it tells me how much traction I have.

3. Change Behavior

Getting old forces changes in behavior. At some point you have to recognize the fact that the mind, eyes, muscles and stamina are not what they used to be. Everyone is different, but from my experience, the rate of decline seems to accelerate once you pass 50 or so. This means I have to pace myself. I am more aware of the need to warm up my body for a few laps just like I do my tires.

The possibility of getting hurt is present no matter what age, but what may be a simple injury, quickly healed, can turn into a long, drawn out healing process if you are older. You will have to hire a qualified personal injury lawyers in Kennewick to compensate the long-term treatment expenses. Riding smart and wearing really good personal protection is important for minimizing those injuries.

4. Stay in Shape

I’m not in bad shape, but I’m not in great shape, either. I walk almost every day, but I used to run. I lightly stretch when I need to, but not as often as I should. I have never smoked and my vitals are good. I guess I can say I’m in pretty good shape for my age. As you continue to stay active, consider incorporating supportive and stylish workout gear like ryderwear leggings to elevate your fitness experience.

Even so, I suffered a freak health issue a while ago that I’m lucky to have survived. Thankfully, I can still manage a full day of street riding and both days of a two day track day event without much trouble. Staying in shape is harder as you get older that’s why you need to start incorporating plant based protein powders to your diet. Weight gain is a real problem for many. Weight can creep up on you slowly. Five pounds may not seem like much, but if that happens every year for 10 years, you’re looking at a whopping 50 pound weight gain that will be tough to get rid of.  During recovery, your body’s nutritional needs may increase, and greens powder can help support the healing process. You can read this review on https://www.outlookindia.com/outlook-spotlight/athletic-greens-ag1-review-is-it-worth-the-hype-or-superfood-don-t-buy-until-you-read-this-news-301982/ before buying online.

Being an instructor gives the opportunity to pass on what you've learned.
Being an instructor provides an opportunity to pass on what you’ve learned.
photo: © Annalisa Boucher

5. Keep Your Skills Sharp

There is a real danger in complacency. It’s easy for veteran riders to assume they don’t need to maintain their mental and physical skills. After all, they’ve survived this far. This perception leads to diminished skills, which can lead to a crash.

Motorcycle riding skills are perishable. So, keep those skills sharp! Practice in a parking lot, attend a safety course periodically, and ride a track day or three. It’s also good to read about riding technique. Even if you already “know” the material, reading about a technique brings it into your consciousness.

And for you older folks returning to riding, GET TRAINING! I know you may know how to “operate” a motorcycle, but that’s not enough to ride safe and smart. You need to update your mental software and learn things you may not have known before that can literally save your wrinkled ass. I recommend taking the Basic MSF course, followed by an advanced training course.


Bonus Tip: Share Your Knowledge

I’m grateful that I can share knowledge that I have accumulated over the years to help people like you ride better and smarter. But, another benefit to writing and teaching is that it makes me a better rider. I constantly think about my riding, which keeps my skills sharp.

A lot of really fast, experienced riders can’t explain how they do what they do…they just do it. That’s fine, but thinking about the physiology and psychology of riding a motorcycle well makes a rider’s knowledge and skill indelibly deeper and accessible when you need it.

Oh, and don’t assume you know what you are talking about, even if you are “fast”. Learn the physics and language of communicating the complex concepts of motorcycle riding before you claim expert status.

How Much Longer?

At some point, we all must hang up our helmet for the last time. In my case, that appears to be several years away. I can still do things I did when I was younger, it just takes more effort. What are your experiences with aging behind the handlebars?
submit to reddit

See the complete list of Riding in the Zone articles here.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

Become a patron to support the website. Thanks

Check out other track day and riding technique related posts

Check out these related posts:

Motorcycle Track Days: What You Need to Know

Become a patron to support the website. Thanks

What are Track Days All About?

Track Days are the most exciting, fun and effective way to improve your riding skills…period! You will learn how to corner and brake with a lot more confidence and control. And you will have a freakin’ BLAST.

Track Days are held on a closed course (racetrack), which means you learn in a safe environment and at real-world speeds. Learning on a racetrack allows you to ride freely and concentrate on and advancing your skill level without the typical hazards faced on the street…potholes, sand, tar snakes and Buicks.

Many types of machines at our regular track day events. While most ride sport bikes, there are also those who ride Tourers, Adventure bikes, and Sport Tourers. There are even special “Non-Sportbike Days”.

It’s one of the best investments in fun and skill development money can buy.

You may want to listen to this short podcast where Tony and I discuss many track day FAQs.

Learn to Corner Better

While parking lot courses have their place, riding your bike on a track will let you practice riding skills at real-world speeds – without the normal distractions found on public roads (like cars, sand, cops, etc).

Classroom sessions are usually included in the price of your day where you will benefit from discussions and demonstrations of advanced riding technique that you can then try on the track.

The fact that you visit each corner several times a day allows you to perfect your technique without the changing variables found on the street. These techniques are transferable to street riding.

The skills typically learned:


My wife, Caroline in "the bowl" at NH Motor Speedway on her Kawasaki z750s
My wife, Caroline in “the bowl” at NH Motor Speedway on her Kawasaki z750s

 


The Racing vs. Track Day Myth

Who said anything about racing? Here’s the thing; A track day is NOT a race event. Many people respond to a suggestion of attending a track day by saying “but I don’t want to race”. Now, I understand that most people automatically think “racing” when they hear “racetrack”. This is why I spend a fair amount of energy on educating the potential new customer that a track day just might be worth considering, both for having a blast, but also for becoming a better rider (much better).

If it’s not a race, then what is it?

Imagine the perfect twisty road, but with no oncoming traffic, sand, gravel, guardrails or folks in big sedans trying to figure out their GPS while talking and texting on their phones and you start to get the idea of what a track day is. Oh, and did I mention no speed limits? So, riding on a racetrack is not only a safer place to ride, but you can also go as fast as you want without the risk of getting an expensive speeding ticket and insurance points.

Not only are track days fun, they are also a great place to develop your skills. Most track days offer some instruction, with classroom time and perhaps a garage seminar on body positioning. You can also get some on-track coaching if you ask for it. Then you go practice what you’ve learned by circulating around the track. The beauty of riding on a racetrack is that you visit each corner multiple times a day so you can perfect each corner as the day goes on. You also get to explore the limits of your bike, the tires and your ability. Woot!

It’s not about speed!

Yes, we are talking about riding on a racetrack, but that doesn’t mean you have to have the latest rocket, or even that you have to go a whole lot faster than you do already on the street (in the novice groups). That’s the beauty of track days as opposed to a competitive racing environment; they have two completely different purposes. Both track days and racing allow you to go as fast as you dare, but track days allow you to go as fast as you want without the pressure to win a competition. When racing, you risk a lot more because your goal is to try and beat the next guy.


The goal of a Track Day

So, what exactly is the point of doing a track day then?

  • A Safer Place to Have Fun! With no surface hazards or roadside obstacles to hit and an ambulance just seconds away, the track is the safest place to ride, especially if you want to ride fast.
  • A Safer Place to Learn! You will be able to concentrate on refining cornering and braking skills by riding the same corners over and over.
  • Socialize! Commiserate and socialize with like-minded motorcyclists. Most new track day riders show up for their first day nervous and afraid, only to find a friendly group of fellow riders eager to help you learn the ropes.

Ed carves a perfect line on his ST1300. photo: otmpix.comTrack Days Make Safer Street Riders

 

Safer Riders

I am often asked about the benefits of track days for street riders. The bottom line is that a day or two spent at a training-oriented track day helps develop braking and cornering skills beyond what can be done in most other courses and certainly better than relying on experience alone.

Learning to brake harder and lean deeper pays benefits when a car pulls out in front of you or a corner tightens more than expected. Riders who have never experienced floorboard-dragging lean angles usually panic, stand the bike up and run off the road, even though they had more ground clearance available. Those who have learned to lean deeply and to trust their tires are much more likely to remain in control and stay in their lane.

On the track, a rider practices braking skills by waiting to brake deeper and deeper into corners. Not to go faster, but to see just how capable their bike is at slowing. Trailbraking is also practiced…an important skill to have for safe street riding.

Finally, highly-developed physical skills allow more automatic responses to challenging situations, freeing more bandwidth to manage the hazards and variables of street riding.

Be sure to check out the Non-Sportbike Street Rider Track Training Day page.


Top Excuses why riders don’t do track days:

  • I don’t have Proper Riding Gear
    Yes, you need to protect your body in the event of a crash, but that’s a good investment whether you ride on the track or the street. Most track day organizations allow street gear, so you should already have most of what you need.
  • I am worried about crashing my bike.
    It can happen on the track, but it can also happen on the street (with more severe consequences). Track day crashes usually happen because the rider pushed too hard before they learned to manage the extra speed. Rarely do two riders come together to cause a multi-bike incident. And with no trees, mailboxes or oncoming vehicles to run into, serious injuries are also rare.
  • I’ll be the slowest rider out there.
    So what if you are the slowest rider out there? You’ll get faster as the day goes on and will likely be passing people by the end of the day.
  • I’m afraid I will be in the way of faster riders. This is a common concern. The answer is to ride your own ride and be predictable so faster riders can safely pass. This means learning the line and staying on it. Oh, and keep your eyes looking forward. It is the passing rider’s responsibility to pass…just like when skiing.
  • I don’t have a way to get up to the track.
    Many organizations have a forum or Facebook page where you can ask for help getting your bike and yourself to the track. If it comes down to it, just ride your bike there. You are risking crashing the vehicle you planned on taking you home and you’ll be tired ride home, but many people do it. Bike prep is usually minimal and can be performed at the track. Here is a video I did showing what is required for Tony’s Track Days. NOTE: some of these requirements are no longer required. See the bike prep page on Tony’s Track Days site.
  • I don’t ride a Sportbike.
    Again, so what? All types of bikes show up at track days…sport tourers, adventure bikes, standards, vintage bikes, even the occasional Gold Wing and cruiser.
  • It’s too expensive. Why should I pay to ride someplace?
    It makes little financial sense to risk serious injury, a speeding ticket, and insurance points rather than pay to ride on the track. The cost of a track day varies from region to region and from track to track, but you can expect to pay anywhere from $150.00 to over $300.00 per day. This often includes some instruction.
  • I’m not comfortable doing a track day yet.
    Maybe you’re just nervous. If so, then rest assured that you’re not alone. It’s smart to have some street miles under your belt, but if you’re comfortable riding around corners at brisk street speeds, then you’re probably ready to do a track day. Many organizations allow spectators to come check out what it’s all about. This is a great way to see if it might be right for you. And most organizations have two or three group levels so you are matched to others’ experience level.

I hope this has shed some light on the mysteries behind track days.

If you have questions, let me know and I’ll do my darnedest to help out. You should also check out the website of the track day organization you plan on joining. FYI, I work as the chief instructor for Tony’s Track Days. And check out other track day related posts and videos.

 
http://www.tonystrackdays.com/

Check out the other track day related posts and videos.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

  •  
Become a patron to support the website. Thanks

How to Not Suck at Motorcycle Maintenance

Become a patron to support the website. Thanks
chain-copy
My daughter cleaning and lubing a chain.

Motorcycling is much more than simply owning a two-wheeler. It also means learning to ride well enough to be safe and having the ability to maintain your motorcycle so that the machine you straddle is in top-notch condition.

This is not a trivial requirement. Stories abound of hapless riders falling victim to incidents caused by ill-maintained motorcycles. Failure to lubricate, air-up, tighten or replace certain parts can lead to painful and expensive mishaps that could have been avoided with a bit of preventive maintenance.

New riders can easily become discouraged once they realize that it is time and cost-prohibitive to bring their motorcycle to their local repair shop or dealer to perform frequent chores. It just makes sense to learn how to lube and adjust your chain, change your oil and perform small adjustments that need attention from time to time. It also makes sense to have the ability to bolt on accessories.

The good news is that it’s not difficult to learn how to be self-sufficient. And once you start getting your hands dirty you’ll find a deeper connection with your motorcycle (and with riding).

Once you adopt these basic principals, the next step is to find your owner’s manual and buy a bike-specific repair manual so you can know what is involved with a particular project. Some jobs are better left to the pros, but a surprising number of tasks are very doable by an adventurous owner.

Below is a basic list of tips I put together that will help get you started.

Note: This article contains links from Bike Bandit. I usually turn down these sponsored post offers, but I said yes because I have been using them for years as my go-to source for OEM (original equipment) parts and other goodies. Although this post is sponsored, all opinions are my own. Really.

1. Lefty Loosey

When my daughter was old enough to hold a wrench, I made sure to include her in some basic maintenance chores. She resisted at the time, but she now thanks me. She is not afraid to tackle maintenance chores partly because I exposed her to what it feels like to simply turn wrenches and screwdrivers on various fasteners and components. The first thing she needed to learn is the law of “lefty loosey, righty tighty”. If a nut or bolt won’t seem to budge, first confirm that you’re turning it the right way. Believe me, this happens all the time with newbies.

2. Use the Right Tools

There is a difference between a #2 and #3 Phillips screw driver. Asking a #2 to loosen a tight #3 screw may work out, but don’t be surprised if you then have to deal with a bunged screw head. Having a set of tools and garage supplies like extractors, vice-grips and taps might save the day. Maybe. Get a comprehensive set of metric (or SAE for you American bike owners) sockets and wrenches so you avoid using adjustable wrenches and pliers, which often make your job downright miserable.

3. Stubborn Nuts

Speaking of tough nuts…Many people struggle because they don’t know how much force is needed to loosen stubborn nuts, shoulder screws or bolts. The right amount of oomph needed to get a fastener undone becomes a “sense”. I can usually feel when a bolt is about to strip (damage threads) or break (sh*t). This comes from experience. But, don’t be deterred. As long as you have the right sized tool (no adjustable wrenches, please) and follow the law of “lefty loosey, righty tighty”  then go for it. Just be sure to maintain pressure where the tool meets the fastener so it doesn’t slip on the screw, nut or bolt head.

If it still won’t budge, give it a squirt of Liquid Wrench and let it sit a bit, or apply heat for really stubborn fasteners. If it still won’t give, then clamp on a pair of vice-grips and give it a go. If you are still having trouble, you’re going to need help from someone who can extract the boogered fastener. Or keep at it yourself. Expect to use swear words not heard since your college days. @#%&@* It will eventually come out. Have faith.

4. Understand How Things Work

You will be a more daring and successful mechanic if you learn how a motorcycle’s brake, drive, electrical, and control systems work. It will make more sense why the manual says to remove the whatchamajigger if you know its relationship within the system. You will also be better able to diagnose problems if you know that the thingamajig drives the whatsahoozit.

There are lots of online articles to help with this, and to walk you through specific jobs. You can also take a look at the series of videos from the MC Garage that cover many of the basic maintenance tasks faced by us motorcycle riders. If you plan on doing more complex tasks like valve adjustments, you’d be smart to learn how the engine works, but it’s not necessary for most maintenance chores.

5. Have a Reliable Source for Motorcycle Parts

Let’s say you learned that you need to replace your chain and sprockets, air filter or clutch cable. You can go to your local dealer to buy parts, or you can choose to shop online without leaving your living room. I am a big supporter of my local dealers, but I sometimes feel like they are little more than middlemen between me and the parts distributor. However, if you’re new to this whole motorcycle fixing thing, a knowledgable dealer can offer advice and guidance not easily accessed from online retailers.

Also, delivery can be shorter if I ordered parts online myself and had them delivered directly to my door.

bikebandit-logo Bike Bandit has delivered prompt service time and again. Even if I end up buying from my dealer, I regularly use their online parts microfiche to learn about the project and make sure all the right parts are ordered. Their search function gets me to the correct page quickly. They also have a “My Garage” list to quickly find parts that fit the bikes I own.

Accessories

While I am ordering maintenance parts I usually end up shopping for other goodies like motorcycle accessories or motorcycle gear. Much of my accessory shopping is done at Twisted Throttle, but I always seem to have some “Bandit Bucks” to spend, so I end up adding something to my order. Besides, Bike Bandit has gear and accessories that Twisted doesn’t carry. I find Bike Bandit easy to work with and their selection is very good. Check them out at www.bikebandit.com.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!




Check out these posts:


Stay Informed: Subscribe NOW!
Be a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle

 

Become a patron to support the website. Thanks

Video Lesson: Uphill Hairpin Fail

Here is another installment of “Videos Lessons” where we pull from the seemingly never ending supply of rider videos from which we can learn. Even though these are 2 very slow speed crashes, the injuries could have been serious. I hope everyone is okay.

This particular video shows the seriousness of slow speed mishaps and of course the importance of rider training.

First, take a look at the video. The crash happens around 1:15. I’ll wait.

Pretty scary, right? It’s hard to see, but it seems the first rider to crash was actually in the lead, and the rider with the passenger had to slow and go around his friend as he tipped over. The second rider (with passenger) watched his friend fall and appeared to be putting his right foot down to stop, but failed to use his front brake and rolled off the road.

I want to point out that at about :45 the Harley riders demonstrate some apprehension about their ability to handle the tight turns. You can see this as they approach the right hand turn marked by a 20mph road sign. They are smart to slow down because there is a yield sign before a narrow bridge, but they seem to slow more than necessary. This is often indicative of serious cornering anxiety. The confirmation of weak cornering confidence comes when the mishap occurs.

It’s interesting to note that this mishap is different than others where the rider enters a turn too fast (for his/her ability) and runs wide (see this video). In this case, both riders fell on the inside of the right-hander. Why?

Crasher #1

Let’s begin by discussing the rider who first crashed. He says that he hit a hole in the road and then rode over the patch of sand. I don’t doubt this. I also don’t doubt that the hole and the sand contributed to upsetting the bike’s stability (at least a little bit).

Even so, the real questions needed to be asked are:

1. why did he hit the hole when there was opportunity to ride over smoother pavement?

2. why did he fall over?

Here is my explanation:

1.Why did he hit the hole? The reason the rider who first crashed hit the pothole was because of poor visual skills. It’s human nature to look down when we are anxious. It is likely that the rider wasn’t looking far enough ahead to come up with a plan to manage the tricky hairpin, resulting in him being taken by surprise by the tight radius and and steep slope. As he rounds the bend, he sees the hole and the sand which further increases his anxiety and triggers his survival response that includes staring at the hole. When we panic, we tend to target fixate on hazards. The problem with staring at a hazard is that we tend to steer toward it like a super-powerful magnet.  This tendency of going where we look is called Visual Direction Control and is likely what causes him to run over the hole…and then the sand.

Solution: Looking well ahead allows you to avoid surprises. Also, looking at an escape route rather than the hazard could have kept the bike away front the surface hazards. Seeing hazards early is critical for keeping these dangerous survival triggers from taking over.

2.Why did he fall over? Hitting the hole and sand did not make the crash inevitable. Factors that caused the actual fall probably included an overreaction and extreme tension. This would result in the rider clamping on the handlebars and chopping the throttle at a time when he was already moving very slow on a steep uphill hairpin. This reaction hindered direction control and killed what little amount of stability the bike had, causing gravity to take over and the bike to fall over.

Solution: Motorcycles are more stable with speed. Had he kept steady drive the bike’s suspension would have handled the bump better and stability would have been maintained. As far as the sand goes, easy acceleration and a light grip on the handlebars while reducing lean angle slightly would have allowed the tires to deal with the sand while allowing the bike to remain in its lane. As I mentioned earlier, had the rider kept his eyes up, he would have likely selected a path that avoided both the hole and the sand. Problem solved.

Crasher #2

The lead rider’s crash was caused by the same two reasons I already outlined: Looking in the wrong place and insufficient speed for stability.

1.Why did he ride off the road? Because we tend go where we look. The lead rider looked over his right shoulder, causing the bike to drift to the right and drop off the shoulder and down the ravine.

Solution: Same as above. Look where you want to go. Yes, seeing your buddy fall over can grab all of your attention, but it’s imperative that you always remain in control and that means keeping your eyes ahead until you can come to a safe stop.

2. Why did the bike go off the road so quickly? Because of a loss of directional stability. When the rider decelerated on the steep slope he slowed down enough for gravity to take hold of the bike and send it down the hill.

Solution: Same as above. Had the rider maintained positive drive he would have completed the corner on two wheels.

This video demonstrates the importance of two of the most critical skills motorcyclists need to maintain control: Visual direction control and Speed for stability. Think of these two hapless riders the next time someone suggests taking a parking lot course that covers basic slow speed maneuvers and cornering techniques. The techniques would have saved these two a world of hurt and embarrassment.

Even better is if they had signed up for on-street training where instructors can observe problems at real world speeds and conditions.


Check out these posts:


 

Become a patron to support the website. Thanks

Adventure Accessories for the Triumph Tiger 800

Become a patron to support the website. Thanks

Mitas-bike-2The arrival of the newest addition to the RITZ garage is a Phantom Black 2016 Tiger 800 XRx. The Tiger has proven to be a true all-arounder. I have toured on it, done a track day, conquered Deal’s Gap and navigated some pretty gnarly roads and single track on the Tiger.

See my LONG-TERM review of the Tiger 800 XRx

I bolted on some accessories (“farkles” to you ADV guys) to help increase the Tiger’s versatility. My friends at Twisted Throttle took care of getting me all the best accessories I needed. They have some of the best Adventure bike accessories. Here is what I installed.

Bike Protection

SW-MOTECH Crash Bars
SW-MOTECH Crash Bars

SW-MOTECH Crash Bars

SW Motech is a German company specializing in top-shelf bike protection. Their crash bars are seriously beefy compared with others I’ve seen, including the Triumph branded bars. The trade off is weight. The SW bars add some pounds to the bike, with much of it held high where the upper loop is located at tank level.

The advantage of the high loop is the protection offered to the fuel tank. But, realistically, a low bar that protects just the engine is a fine option, partly because if the tank makes contact with the ground, it is the plastic side panels that get nailed, and those are only about $60.00 to replace. An good engine guard alternative are the R&G Engine Guards.

Another problem I found with the high SW bars is vibration. It seems as though the setup acts a bit like a tuning fork. Although I noticed the vibes on my first ride with them installed, I no longer notice it at all so this should not be a deal breaker. If you want maximum protection, the SW-M bars are the way to go.

Skid Plate/Sump Guard
SW-MOTECH Skid Plate/Sump Guard

SW-Motech Skid Plate (Sump Guard)

The Tiger comes with a decent plastic skid plate, but it is not beefy enough for the type of abuse the bottom of the engine and frame will be exposed to so I ordered the SW-Motech skid plate. It mounts easily and covers much more of the vulnerable underparts not protected by the OEM plate, including the oil filter, lower exhaust canister and frame rails. It’s quite satisfying to hear the sound of rocks pinging off it’s surface. Money well spent.

R&G Radiator Guard

Putting a hole in a radiator from an errant stone  will end your day real fast and is an expensive repair so I installed the R&G rad guard. R&G makes a heavier duty stainless steel guard, but I went with the lightweight aluminum unit. It installs easily and looks great.

I need a Hugger
R&G Hugger

R&G Rear Hugger

A Hugger is a rear fender that mounts close to the rear tire to help keep your rear shock clean. The R&G hugger bolted on perfectly and gives a custom look to the Tiger’s rear end.

Pyramid Fenda Extenda

The Fenda Extenda mounts to the bottom of the front fender to help keep crap from flying onto the front of your engine and radiator. It requires some drilling, but is easy enough to install.

Luggage

Side carriers and crash bars
Side carriers and crash bars

SW-Motech Hard Bag Sidecarriers

I already owned a set of DrySpec D20 drybag saddlebags and wasn’t planning to buy hard cases until I realized that the soft saddlebags needed to be supported by a side carrier to avoid drooping under the rear fender and seat. I went ahead and bought the SW-Motech side carriers for use with the D20s but then decided to go for some side cases after all (see below). These carriers are awesome. They quickly release from the bike with just a twist of 4 Zeus fasteners. And the quality is top-notch. They carry all brands of side cases with the proper adapter kit.

The Givi E-22 side cases look good and are narrow and light.

Givi E-22 Side Cases

There are a lot of side cases to choose from, including the Trax Boxes and cases from Givi and other manufacturers. But, I chose the most lightweight and inexpensive hard case option; the Givi E-22. The 22 is an updated version of the basic E-20 that has been around for years. The new shape looks great and it is just big enough for my needs. Their small size means that the width of the bike when they are installed is fairly narrow.

The cases open at the top so my contents don’t go spilling onto the pavement when I open them. At the low price of less than $250.00 for the SET, you don’t get premium construction, but they have held together just fine and I expect them to perform well for many seasons. FYI, I mount mine backwards from what is intended because I like the way the rearward slop looks on the Tiger.

Bags Connection City tank bag with Quick release ring.
Bags Connection City tank bag with Quick release ring.

Bags-Connection City Tank Bag

The BC tank bags are pricey, but are also well made and highly functional. The quick-connect tank ring is really easy to use and is totally secure. I ride the roughest roads with the small City bag and it has never flown the coop. For Tiger 800 riders, you want to mount the top ring as far back as possible on the bag so it doesn’t interfere with your man (or woman) junk when standing, especially on uphill climbs.

You can opt for the electrified tank ring version that gets power inside the bag just by mounting it to the special tank ring. I chose the non-e setup and feed a Euro plug-to-SAE cord a SAE-to-Cigarette socket through the front cord port to get power from the Triumph power socket to the tank bag. I charge my phone, Interphone Bluetooth Comms and whatever else needs juicing up during a ride.

tiger-steelrack
The SW-MOTECH Steel rack mounts over the stock luggage plate.

SW-Motech Topcase Steel Rack

I already had a Coocase topcase from my last bike, but I needed a way to mount it to the Tiger. I could have drilled the OEM luggage plate and rigged up the Coocase to it, but I decided to do it right by buying a SW-M Steel rack. The rack is super-strong and mounts over the plastic Triumph plate for a rugged mounting solution. You can opt for the slightly lighter Alu-Rack, but I like the look of the Steel rack and the lower price.

BDry Spec Drybag saddle bags with SW-MOTECH side carriers and City tank Bag.
Dry Spec drybag saddle bags with SW-MOTECH side carriers and City tank Bag. The Coocase top box is mounted to a SW-MOTECH Steel Rack.

DrySpec Saddlebags & DrySpec Duffle

A lot of ADV riders opt for Hard Cases, like the SW-MOTECH Trax Boxes or the GIVI Trekker Cases. I went with more street-oriented Givi E-22 Side Cases for road and touring. But for real off-road trips, I opt for soft side luggage for two reasons. One, the DrySpec Saddlebags will not get damaged in a fall, and two there is no risk of getting a leg crushed underneath the boxes in a fall or having my calf come in contact with the front of a box when I have to dab my foot while in motion.

The DrySpec Saddlebags & DrySpec Duffle are both totally immersible and sturdy enough to over-pack. They are small, but that just forces me to pack light. The integrated mounting straps are really secure and easy to install.

Tool Tube
Tool Tube

Tool Tube

The space between the side carrier and the right side of the Tiger is occupied by the exhaust, but there is lots of space on the left side for something. That something I chose was a Tool Tube. I put extra tools, a small can of chain lube and a few other items in their for safe keeping.

Comfort

MRA Spoiler Blade and GPS Mount.
MRA Spoiler Blade and GPS Mount.

MRA X-creen Sport Clamp-on Air Spoiler

I get a ton of questions about the spoiler blade I have mounted on the Tiger’s stock windscreen. A lot of people have replaced the stocker screen with MRA or Givi screens, but I like the look of the stock screen, and with the addition of the adjustable MRA X-creen spolier blade, I am perfectly happy with the way it manages wind. I wrote a complete review of the MRA X-Creen earlier when I first mounted one on my Sprint RS. A great option.

roxROX Bar Risers

Standing is a big part of off-road riding. The stock bar mounts were okay, but the reach when standing was a bit far and I was also hoping to find a better bar position that alleviated the cramp I get in my upper back. The ROX risers are nicely made and offer a wide range of adjustability with two points of rotational movement. Now, I can stand naturally when riding off road, but the back cramp is still there. I just can’t seem to find a position that helps this problem. I will continue to work with the ROX risers to find that solution.

Electronics

RAM Mounts and X-Grip Phone Holder

RAM Mounts and arms reliably hold my GoPro, iPhone and GPS. There are so many options that it forces you to get creative about where to mount the RAM ball and then which RAM arms to use for your particular needs.

The X-Grip has proven to be a secure and easy mount for my iPhone 5 and 6, even when riding single-track trails on my KLX. Just be sure to use the RAM Tether on rough terrain.

GPS Holder with RAM ball.
GPS Holder with RAM ball.

SW-Motech GPS Mount

This Mount positions your GPS (or other device) right smack dab in the middle of the windscreen, just above the instruments using custom bracket and a RAM ball and arm. It’s a perfect solution to prevent having a GPS cluttering your handlebars. It is high quality and mounts easily.

Tank Bag Power

Click the title link to see various electrified tank bag options. I mentioned the tank bag system I have that uses a Euro plug-to-SAE cord a SAE-to-Cigarette socket to power the tank bag. Either option is a good one. Having power in your tank bag is a necessity in today’s e-world.

Tires

tiger-mitas-oem
Mitas 50/50 tire on top. Metzeler 90/10 tire on bottom.

Mitas E-07

I wrote a complete review of the Mitas E-07 50/50 tires. In a nutshell, these tires are great and will allow you to go places you never thought you would. For the Tiger Roadie, order the 110 front tire to avoid the ridiculous oversteer. Order the standard (not Dakar) version for the 800.

Mitas Terra Force

I have not mounted these 90/10 dual sport tires yet, so keep an eye out next year for a full review.

 

Become a patron to support the website. Thanks

Review: Motus MST-R – American Made

Become a patron to support the website. Thanks

The  Motus MST-R is an American hot rod. Its push-rod “baby block” motor hearkens back to the days of monster V-8 Cobras, GTOs, Trans Ams, Z-28s and Dodge Chargers. Badass. The Motus also hints at the exotica of a Ferrari with its high-end components and sophisticated styling.

Engine

The centerpiece of the Motus is the 1655cc longitudinal V-4. Firing up the Motus is like awakening an angry beast. The mechanical raucousness from the push-rod motor is a bit unsettling until you realize that it’s supposed to sound that way. Jokes about needing to add more oil should be expected. The racket smooths out significantly once underway and transitions to a song of badassness coming from the carbon-fiber exhaust.

The motor is well controlled but is also kind of a brute at the same time. The combination of mechanical sensations and gobs of torque make this a bike that gets attention.

With a claimed 180hp and 120 ft lbs, power is plentiful (the regular MST makes 165hp). Acceleration is less urgent than a pure sports bike, like an R1, but the Motus sure can get up and go. And the always-available torque means it pulls like a freight train.

180-ish horsepower can be intimidating, but the Motus delivers the power in a controlled manner and right from the bottom of the rev range. Rev it to the 8,000rpm redline (push-rods limit RPM) and the landscape rushes by with immediacy.

Thankfully, the bike can also lope along at legal speeds. It just doesn’t really like to. The fueling is fine, but I suspect it is the motor that causes the bike to surge at steady low-range RPM where it hunts for a calm and steady pace. Get on the gas and the motor is happier, just keep an eye out for the authorities.

Fueling

The Ride-by-Wire throttle meets modern standards and is easy enough to control, but there is a slight amount of surging that is reminiscent of a system that is not 100% sorted. Like many OEM FI systems, a bit of re-mapping may smooth things out. That said, the bike is controllable enough to make tight parking lot maneuvers, but it takes some extra skill to do it smoothly.

These days, we expect electronic nannys on our premium bikes, but the Motus does not have Traction Control or ABS. Next year, I’m told.

Transmission

The 6-speed (with overdrive) tranny is kinda industrial. It reminds me of transmissions found on big cruisers. Clutchless upshifts are possible, but not recommended. The clutch is easy to control when leaving from a stop and I never missed a gear, so it’s all good. Finding neutral is a chore, though. The full color LCD instrument cluster includes a helpful gear indicator.

Handling

It puzzles me when a bike ships with the best available shock and fork components, but is not set up very well. This is the case of the Motus. The fully adjustable Ohlins TTX36 and NIX30 forks will allow the right settings after some fiddling.

Jim Hamlin of Hamlin Cycles noted that the shock spring rate is also too soft for most riders. The resulting low rear ride height causes some awkward handling characteristics and hinders feedback, making me apprehensive to push it too much.

The bike turns in fine, feels reasonably neutral mid corner, and is stable. Like the motor, the suspension works best when is being worked hard. But, that’s when the too-light rebound damping showed its head. Four clicks of added rebound damping put it in the ballpark, but more tweaks will be necessary to get this sorted.

The forks seemed fine, so I’d concentrate on getting the shock set up first.

Comfort

The MST-R comes with a Sargent seat. It’s supportive enough around the sit bone area, but becomes too narrow at the front. I give it a 5 out of 10.

The windscreen is adjustable, but the stock touring screen that is fitted on this bike created a lot of wind noise at the taller setting. Apparently, the sport screen is the same height, so I don’t see that as a solution. I hear some riders have cut down the stock screen to try and get the wind to hit closer to shoulder height. Your results may vary.

This particular bike was fitted with adjustable Heli-bars. They reach back toward the rider and feel like ape-hangers to me. I would opt for a more direct connection to the bike and a position that is lower and more forward.

You’ll may want to buy some asbestos-lined riding pants, because the engine heat is pretty intense.

Brakes

Brembo makes top shelf braking components that offer good feel and controlled power delivery. They are not overly powerful, which suits the task of this bike. The rear brake is controllable and well placed. But, no ABS. Really?

motus-poseOverall Thoughts

I was grateful to my student John for letting me take his ultra-cool sport tourer out for a spin. The bike reminds me of an angry Moto Guzzi. The transverse motor rocks side-to-side when you blip the throttle at a standstill and the chassis has that lazy, yet sporty feel to it, like a Norge.

So, who would love this bike? I’d say it is someone who wants a unique experience over refinement. Those who love visceral feedback and a bully-like sound from their machines will be happy. Honda ST riders will likely not be able to get past the relative coarseness.

The Motus is a tough guy, but is not an unshaven bully who hangs out in dark bars. Instead, it’s more like a well-dressed mobster who is polite and charming. It’s just the thing for those who like living large and don’t mind some rough edges.

Value

At over $30k the Motus is expensive. It performs well, but is a bike that takes getting used to…like so many things worth owning. Is it worth the money? For a lot of folks, it is. It would be a tough sell for a frugal Yankee like me.

Motus Motorcycles


 
 

 

Become a patron to support the website. Thanks

Product Review: Mitas E-07 Dakar Dual Sport Tires

Mitas-bikeMy 2016 Triumph Tiger 800 XRx has proven its awesomeness, both on the street and off-road. To gain even more confidence in rough terrain, I swapped the stock Metzeler Tourance Next (90% road/10% off-road) tires for a set of Mitas E-07 Dakar Dual Sport/Adventure bike 50/50 buns.

Mitas (pronounced Me-tass, think “Meet us”) has been around for a while as a maker of agricultural tires, but also manufactures vintage, moped, scooter, flat track, speedway, street and off-road motorcycle tires and is now becoming one of the go-to tires for Adventure (ADV) bikes.

Since I have not tried the most well-known players on the ADV/DS tire spectrum, I cannot make a direct comparison. So, the review is of my impressions of this tire only.

Disclosure: Even though I bought the first “Dakar” set from Twisted Throttle, MotoRace/Mitas generously supplied me with the second “Standard” set so I was using the correct tire for my weight and bike. See more about the different versions below.

The OEM Tire

The Metzeler Tourance Next tires did okay on the track.
The Metzeler Tourance Next tires did okay on the track. www.owenstrackdayphotos.com

On the street, the Metzeler Tourances were fine, but felt numb. This became even more apparent during a track day where the Tourance tires could not communicate well enough to instill much confidence. Grip was good though; I managed to corner hard enough to mangle both of the Tiger’s footpeg feelers.

Why the Tire Swap?

The Metzelers were also fine for the easy packed and semi-packed graded roads, but the lack of feedback made me wonder whether I was about to push the front tire right out from under the bike on gravely surfaces like I did on the Multistrada last year.

Another reason for the swap to more off-road worthy tires was for an intermediate-level ADV course I was taking with Jimmy Lewis at the Dirt Daze rally in Lake George.

After talking with knowledgeable ADV friends, I decided on the Mitas E-07 50/50s. Reviews suggest that they would provide good mileage, fine road handling and wet weather traction, as well as really good off-road capabilities.

standThe aggressive tread suggests that they will climb anything I plan to tackle, but I wondered just how good they’ll be on the street. I had them mounted just before I was to take a 1500 mile trip to North Carolina, so I was about to find out.

Pavement Performance

The wandering feel of a knobbie-type tire on pavement takes some getting used to. I ride my KLX 250 on the street at a sporting pace with full knobbies, so I am comfortable with how an off-road tire feels when cornering on the road. Despite the usual weird sense that the tires are about to slip out from under you (they won’t), the E-07s provide plenty of grip on both dry and wet pavement.

I did 1400 miles through VA and NC, including a run of Deal’s Gap and the Cherolhala and had a blast. That was with the bike being loaded with camping gear. No, the E-07s aren’t as sure-footed as a road tire and I wouldn’t do a track day on them, but they were absolutely fine as a street tire.

Whine and Vibes

One thing you will notice when riding with these tires on pavement is the high-pitched whine and the added vibration caused by the aggressive tread. I like a quiet tire, so this was a compromise I was going to have to tolerate in order to enjoy the more capable off-road qualities. It turns out I got used to it pretty quickly.

Oversteer

However, it took me longer to acclimate to the abrupt turn-in and oversteer. To keep the bike from dropping too quickly and too far into a lean, I had to countersteer on the outside handlebar. Mike, a student of mine, also commented on the quick steering characteristics after he mounted E-07s on his Super Tenere.

This quick-turning behavior is to be expected from an off-road tire where nimble maneuvering is a priority over stability. There is always a compromise.

The remedy is to mount a wider front tire: I inadvertently ordered a 110 front tire from Motorace instead of the stock 100 size tire. This proved to be a very good thing as the wider front tire took care of the annoying oversteering problem. So, Tiger XR owners, order the 110 front!

Stiff Ride

If you mount dual sport tires, whether they are 90/10 or 50/50, you will have to endure a stiffer  ride compared to a street-only tire like the Dunlop Road Smart. The carcass has to be stiff to handle rocky and rough terrain you’re likely to encounter. Again, compromises must be made.

Riding Off-Road

Mitas-bike-2My first off-road excursion with the E-07s was, um, interesting. Here I had a set of very aggressive tractor-like tires, yet the Tiger’s traction control kicked in almost as soon as I tried accelerating up the first gravel hill. Okay, I had forgotten to switch to “Off-Road” mode, so the TC was on full “nanny”. But, still. The 90/10 Metzelers would have at least allowed me to make it up the hill. Switching to the correct mode helped, but the TC was still going nuts.

I now realize that the Tiger’s TC electronics must have needed to re-calibrate itself for the new tires. I never had that problem again.

I can tell you with great confidence that these tires rock off-road! The Mitas tires give me so much more confidence that I now tackle some pretty gnarly terrain that I never thought I’d experience on the Tiger. This is good…and bad. Bad because it would be easy to go places that the tires can handle, but that the bike may not. Easy there, Tiger.

In New England, most of our ADV-type riding consists of packed dirt, lose gravel, rocky outcroppings and mud. We don’t have a lot of sand, so your results may vary in those conditions.

Pressures

I experimented with tire pressures to try and help soften the rough pavement ride from the stiff Dakar carcass. I also wanted to find a pressure that will balance road wear and off-road grip without needing to air-down for dirt and then air-up later for pavement. The stiffer Dakar tire did well when set at mid-to-high twenty pounds of pressure. I expected the tire to wear faster, but the ride was better and off-road traction was great.

Wear

wearWith all this awesome off-road grip, you’d expect the Mitas E-07s to wear quickly on the street. Well, you’d be wrong. I hear that the Conti TKC-80s only last about 3,000 miles. In contrast, I put 4,500 miles on the Dakar set and there was at least another 2,000 miles left when I decided to change the rear. See photos.

I changed the rear before it was completely worn because the flattened profile became annoying enough that I made the swap to a new rear. I would have been happy enough riding these things down to the wear bars, but I had a new rear in the garage, so made the swap early.

When new, the E-07 has a stabilizing bridge that wears down flush to the center strip in about 1500-2000 miles. The 150 section Heidenau also has a center strip, but it is much wider than the Mitas, making the Heidenau not as good for climbing once the center lugs wear flat to the bridge bars. In contrast, the Mitas has great centerline grip throughout its whole life.

Note that the wear bars are NOT at the center of the tire. The wear bars are the deeper bars that are off center (see photo).

Update: The rear tire now has 6,500 miles and still has meat left on it for another 1500 miles, I bet. The front tire is at the wear bars at about 7,000 miles and the blocks have worn unevenly and cupped. That’s at 28 pounds front and rear.

Dakar versus Standard Versions

When I bought the first set of tires I did not know the difference between the Dakar and the Standard model. The Dakar version has an additional belt to add more durability and stiffness, which makes sense for heavier riders on big(ger) ADV bikes, like the R1200GS who mount hard luggage and load their bikes to the hilt. That’s not me.

The “Standard” version makes more sense for a lightweight rider on a Tiger 800. That said, there is an argument for mounting the stiffer tire on bikes with cast (as opposed to spoked) wheels to protect them from getting damaged over sharp rocks.

NOTE: Twisted Throttle has only the “Dakar” version of the E-07 in stock as of this writing, but I’m sure they will get you the “Standard” version if you ask.

Buy These Tires…If You Can Really Use Them.

Mitas-ZThe Mitas E-07 looks tough as nails, rides well on both wet and dry pavement and does really, really well off-road. I didn’t think I’d like them as much as I do. I say, go for it!

But, before you decide to buy these or any 50/50 tire, be realistic about whether you really need this level of off-road capability. Sure, they look cool, but if your riding is 95% road, then the 90/10 tires will likely suit your needs just fine and be more pavement-riding friendly.
TT_Homepage_logo
Buy your Dakar versions tires from Twisted Throttle and help support this blog. They also have quality luggage & racks, riding gear, electronics, auxiliary lighting, bike protection, and much more. Happy shopping!

 

 

Become a patron to support the website. Thanks

Guest Writer: Taking Control- Hope is not a plan

Become a patron to support the website. Thanks
Jamie Renna on his FJR1300 at Thompson Motor Speedway. photo: otmpix.com
Jamie Renna on his FJR1300 at Thompson Motor Speedway. photo: otmpix.com

Guest contributor Jamie Renna shares his thoughts on sport touring and the benefits of advanced knowledge and training:

There is a genuine adrenaline rush that comes after carving a corner with a smooth approach; throttle roll off/brake, lean and a spirited throttle roll on.

I’m new to motorcycling. I’ve got less than 3 years of riding under my 52-year-old belt. They have been fun years. I’ve crammed two Non-Sport Bike Track Days and two trips down the famous Blue Ridge Parkway in my early years of this new challenging hobby. My bookshelf is populated with several well-read reference books including Keith Code’s Twist of the Wrist II, Lee Park’s Total Control and Ken’s Motorcycling the Right Way. Reading, and re-reading these books have provided me with a much better understanding of how motorcycles work and why they behave the way they do.

Motorcycling is a learning activity and that really appeals to me. I get great satisfaction from beating a challenge by utilizing my small but growing collection of riding skills. The instantaneous feedback of successfully carving a corner can result in a grin that extends from ear to ear.

Getting it Right

My quest for a smoothly carved corner has too often been thwarted by factors that seemed to be out of my control. Something was happening that kept causing me to:

  • correct my lane position in mid-corner
  • swerve to avoid an obstacle I should have noticed
  • scrub off speed in a descending and/or decreasing radius turn
  • and other unplanned “Wow, that was close!” maneuvers.

The Big Question

I wondered: Were all these grin-defeating events out of my control and simply the price of admission for spirited riding in a non-track environment? I think not.

My Training Tour Experience

I’m now confident that I can take control of my riding in a way that will minimize the risk and make close calls a thing of the past, partly because I spent two fun (and rain) filled days touring southern VT and western MA with Ken as part of a 1 on 1 personal Training Tour.

I don’t want this to sound like an infomercial, but I wanted to share all of my thoughts beyond a brief testimonial.

I chose to invest in Ken’s training to augment the Track Days and copious reading I had previously completed. I concluded I needed on-street training to learn how to better manage the factors that prevented me from exiting EVERY corner EVERY time with a grin.

Ken tailored a 2-day curriculum that matched my skills and comfort level. We rode for ~250 miles over 2 days with frequent roadside stops to review Go-Pro video of my less-than-perfect technique. Ken provided crisp, objective, real-time commentary on my riding performance via Bluetooth communicators. You get to do a lot of neat things at a track day, but you can only get this type of personal observation and critique in a small group Training Tour.

The on-street coaching included a disciplined approach to observe and act upon all the leading indicators that are present before you even approach a curve. Ken provides the decoder ring so you can proactively read the leading indicators including:

  • curve radius
  • rate of change for the curve radius (increasing, decreasing or constant)
  • guardrail position
  • telephone poles
  • camber direction changes
  • and pedestrians

He will narrate to you via the Bluetooth communicator all of these indicators to better prepare you to ultimately exit a curve with a big grin.

Once comfortable, the roles will be reversed and you will get a chance to narrate to him all the indicators that each curve presents to you. It’s a bit intense. If you are like me, you will feel a fun change as you morph from a reactive (“I really hope there are no surprises on the other side of this corner.”) rider to a proactive curve-carver. Your confidence level will rise faster than your tachometer as you get comfortable reading the road and being in position to get every drop of fun out of every curve.

The on-road sessions are periodically interrupted with parking lot drills to sharpen skills that might have atrophied. These include slow speed U-turns and emergency swerving left or right. Other fun drills involved hard front or rear braking on a sandy surface to experience the shudder of your ABS system.

One last memorable drill was to rapidly stop from a speed of 55+ mph. This type of stopping might be needed to avoid hitting a deer if swerving is not an option. Ken had me do this drill in a remote area where we were sure no other vehicles were present. Doing it on a dry road was fun…doing it later in the day while it was raining was…rewarding.

Final Thoughts

  • Remember: Hope is not a plan.
  • Take full advantage of all your opportunities for qualified training.
  • Read.
  • Ask questions.
  • Read again.
  • Go to a Track Day.
  • Read some more.
  • Take a Training Tour.

There are lots of grins waiting for all of us in those curves. Go get your share.


Jamie_Renna-portraitJamie Renna is an aeronautical engineer who started motorcycling after his 50th birthday. He has aggressively pursued numerous forms of training to ride safely while seeking the next big grin. His newly found motorcycle peeps have been a great source of riding technique tips, motorcycle maintenance skills and most of all laughs.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!





Check out these posts:


Stay Informed: Subscribe NOW!
Be a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle

 

Become a patron to support the website. Thanks

Yet Another Crash Video We Can Learn From

Here is another video that I’m pretty sure demonstrates how we humans don’t want to admit when we screw up.  See the video of the poor guy who sideswiped a big truck on his R6. The problem that he says the wind drove him into the truck. Whaaa?

Note: you only need to watch the first 15 seconds to see the incident, but you’ll have to stick it out until the first passerby arrives to hear him mention the wind. WARNING: The video may be difficult to listen to as the poor guy writhes in pain. He also swears a bit.

While I know the wind out west can be strong enough to knock over tractor trailer rigs, I’m pretty sure wind had nothing to do with this incident. I think it’s another case of inaccurate self-evaluation and lack of rider ability and/or a serious lack of concentration.

I can’t tell how strong the wind was at the time of the crash, but the trees aren’t being blown around very much and his friend’s hair (he appears later in the video) is barely moving at all. Maybe he’s wearing copious amounts of hairspray, but I don’t think so.

Besides, if it were strong enough to blow a bike across a lane, I doubt the rider would be chatting away so casually before the incident. Also, the rock formations on the side of the road should have blocked any direct side forces.

Dangerous Distraction

One explanation for this seemingly bizarre crash is a complete and total brain fart. I’m not sure if he is talking to himself or to his friend who is riding ahead, but he wasn’t focused on leaning enough to make the curve.

Early Turn Entry

Notice how the rider began heading toward the inside of the corner too early, causing his bike to be pointed toward the oncoming lane. – Thanks for readers for pointing this out.

Countersteering, Baby!

Another contributing factor is that perhaps he did not have a good grasp of countersteering. A hard push on the right handlebar should have kept him in his lane even if it were windy.

Target Fixation

Target fixation is another likely contributing factor in this incident. Target fixation is a phenomenon that explains why we go where we look. Once the rider realized he was drifting wide into the path of a big truck, he likely couldn’t take his eyes off the hazard and that’s where he ended up. Look toward the solution, not the problem.

Human Nature Strikes Again

I think this is another example of someone blaming something other than their inability to stay focused or steer effectively. Deferring blame is a basic human response to help explain how they could have made such a serious and basic mistake.

See this video of another crash that demonstrates how humans can delude themselves.

The reason to highlight these videos is not to place blame, but to recognize the danger of not knowing why an incident happened. Without that, we are destined to repeat the mistake.

What do you think?


If you liked this article and the many other articles on this site, please toss a buck or five into the hat. Select an amount and then click the PayPal Pay Now button. It’s greatly appreciated!


Donate to keep articles coming





Check out these posts:


Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

 

Video Lesson: Group Riding Crash Video

Become a patron to support the website. Thanks

Take a look at this video of the guy who crashes trying to avoid his buddy who just hit a dog. The second rider doesn’t hit his friend, but almost gets creamed by an oncoming Tractor Trailer. A lot of comments and Monday morning quarterbacking have filled social media already, so I wasn’t planning to add to the noise until a reader requested that I share my thoughts. So, here you go.

First off, I am really sorry this incident happened and I’m glad everyone is okay. I’m very thankful that the truck driver was paying attention so he was able to miss hitting the sliding rider. It’s really too bad about the dog, though.

For those of you who have not seen the video(s):

In addition to these clips, you can read a local TV station's post that interviews one of the riders, as well as a so-called "Expert". You can see that HERE.

A Second Incident Behind

Make note about the second video that another incident happened in the back of the group. This is an example of a chain reaction that can lead to more issues. Let’s analyze this to try and learn from the incident. Note that my comments are based on typical causation and not firsthand involvement.

What Went Wrong

A few things went wrong here:

Unleashed Animals

Animals are unpredictable, making it super difficult to know when they might dart in front of you. I hit a small dog last season when it ran out from some high brush and directly under my front wheel. We can’t control this, except to scan for movement along the sides of the road.

Staggered Formation

The staggered group riding formation that the group was using is not unreasonable when traveling on a straight section of road. But, if you look at the video from the rider ahead who looked back, you can see that the rider that struck the dog could not see the animal until it was really too late. That’s because the video rider was blocking the view of the side of the road.

Staggered formations also prevent the riders from using the full width of their lane and limited their option to swerve.

Instead of using a staggered formation that spans the full width of the lane, I suggest staggering only enough to see past the rider ahead so there is more distance between the yellow (center) line for riders staggering on the left part of the lane, and more distance between the white line for riders in the right part of the lane. This will help prevent them from “eclipsing” each other from hazards. This works best if there is ample following distance between riders.

Riding Too Close

It’s hard to tell just how close each rider is following, but a too close following distance commonly results in panic-induced over reaction. I suspect this was another factor.

A Lack of Training

The second rider got on the brakes hard, which is good. But, his abrupt braking caused his rear tire to leave the ground, which was quickly followed by smoke coming off the front tire from a skid. Once a front tire skids, it’s all over, most of the time.

Speed?

Speed is usually a factor in incidents, simply because the slower you go, the more time and space you have to respond to hazards. That said, it appears that the speed was reasonable for the road.

Another Example of the “I Had to Lay It Down” BS

The second rider said he avoided hitting his friend by deliberately dropping his bike. I hear this all the time…”I had to lay it down to avoid [fill in the blank]”.

I know, the idea is to try to avoid what could be a worse crash. And in VERY rare situations, this may be true. But, 99.9% of the time, crashing to avoid a crash makes no sense. Today’s brakes and tires allow tons of grip and stopping power to scrub off big speed very rapidly…if executed correctly.

Even if this was a viable solution, having the presence of mind to deliberately crash while facing a panic situation is not bloody likely. It’s way more likely that a person will react the way untrained humans do…by grabbing the brakes abruptly enough to cause the front tire to skid. Classic mistake.

Unfortunately, this video will help keep this dangerous BS myth alive.

Human Nature

The truth is that the second rider who crashed screwed up by braking too abruptly. Don’t feel too bad. We humans make mistakes.

As much as you’d like to think of yourself as a hero for sacrificing your bike and riding gear to avoid hitting your buddy, the odds are that you just braked so hard as to loft the rear tire and skid the front tire, which dropped your moto to the ground in an instant.

You’re not alone. A lot of riders claim that they layed down their bike because they:

  • genuinely believe it was the best thing to do
  • probably know better, but are in denial
  • helps them feel better about screwing up. And who can blame them, after all people easily accept this explanation in a positive way.

The Case For Training

It’s likely that this guy has not been exposed to such a severe situation before and was not trained to handle it. Unfortunately, most riders are ill prepared to handle this.

To be fair, it’s possible that I might do the exact same thing, because I too am human and make mistakes. But the odds are that I won’t, because I’m trained. One thing for sure is that I would not have deliberately crashed my bike because I thought it was best to throw in the towel.

Practicing braking techniques not only teaches your body how to execute the maneuver, it also puts the maneuver into your muscle memory. This is key when you have a split second to respond. Untrained riders snap, whereas trained riders are more likely to remain in control. ABS would have helped the second rider stay upright, but deferring rider ability to technology has its problems, too.

Notice that I say “respond” and not “react”. There is a difference. Trained riders respond, untrained riders react.

An Interview with a So-called “Expert”

Just look at the TV reporters and so called expert who gave the rider a big attaboy. The television station interviewed a local motorcycle safety instructor about the mishap:

“A perfect choice by the rider,” says Vandervest Harley-Davidson Riding Academy Coach Susie Davis. “The bikes can be fixed much easier than people can be fixed – so proud of them for doing that.”

Both men decided to drop their bikes and skid on the road instead of swerving to avoid the dog and then each other. Davis says that split-second decision may have saved their lives and the lives of the other motorcyclists with them.

”I think they did a miraculous job,” said Davis. “They let the bike go. They saved themselves. They came out alive. They’ve come out with minor injuries. I don’t know that it could have been done any differently.”

WRONG! This coach is dead wrong and is perpetuating this BS. Having a supposedly trained instructor miss the point just goes to show how deeply ingrained this myth has become. Sad.

A Similar Perspective

Riding Man author Mark Gardiner wrote these two excellent articles that corroborate my point of view. Check them out.

His Blog

Revzilla

The Takeaway

Untrained humans will react in a knee-jerk manner to panic situations. To avoid this:

  • Get yourself trained
  • Select lane positions that offer the best angle of view
  • Don’t lay your bike down, or at least stop claiming that laying it down was your only choice.

The guys did at least one thing right: They were wearing protective gear. Good job, there.

Share your thoughts below.


Thank You!


Check out these posts:


Stay Informed: Subscribe NOW!
Be a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle
Become a patron to support the website. Thanks