Okay, so I’m an idiot. Not for the multiple reasons that my wife might list, but because after 50-plus years living in the Frozen Northeast, I have just now discovered the awesomeness of riding a dirtbike on ice. Add to that the fact that I have lived on a perfectly good lake for the last 25 years and you can see the reason for my self-criticism.
Am I Crazy?
Okay, I can probably be forgiven for not riding a motorcycle on ice, after all, it does seem a little crazy. And I’ll admit to being super-intimidated the first time I rolled my 2010 Kawasaki KLX250s onto the previously liquid, but now molecularity-hardened surface in front of my house.
But, I’d seen the photos of others leaning at insane-degree angles on frozen bodies of water, so I figured that with my newly-mounted Fredette Canadian ice tires, I just might be okay.
And so I was. As a matter of fact, I was more that okay, I was absolutely beyond okay! After a few tentative laps around the rock-hard lake, I was giggling like a schoolgirl on Nitrous.
Pavement & Dirt Training
So, as much fun as ice riding is, it also offers big benefits to my off-road riding, as well as my street and racetrack pavement riding.
Here are some of the benefits that I found:
- Becoming more comfortable with managing variable amounts of traction.
- Learning to look through turns even when traction is breaking loose beneath you.
- Seeing just how much throttle control affects traction.
- Understanding the importance of proper body position for off-road riding.
- Learning to relax even when you’re on the edge of control.
- Feeling more and more comfortable “backing it in”.
Each of these things apply to general motorcycle riding, with some lessons being more applicable to dirt riding and ultra-fast racetrack riding. As a street rider, ice riding widens experiences and expands the margin of error for those times when the unexpected happens and survival means keeping your cool.
What I Learned: Basic Technique
Ice riding is a lot like dirt riding especially, flat track, and is all about taking advantage of the grip the tires offer.
Lean the Bike Beneath You: Ride on top of the bike when cornering, sitting on the upper edge of the seat with the bike leaned sharply underneath you. Avoid leaning to the inside like you might do when street riding, track riding, or roadracing.
Arms: Extend your inside arm while keeping your upper elbow up high and bent. This is tiring and hard to remember, but really helps with front tire traction and control. This arm position means you will hold the throttle like a screwdriver when making left-hand turns (most ovals go counterclockwise, like flat track racing).
Sit forward: Sit on the very front of the seat so the bike’s pivot point is centralized.
Feet: Weight on the outside footpeg to maximuze traction. Drag your inside foot on the ice as a third contact point. Be careful not to put too much weight on the foot to avoid hooking it on rough ice and cause it to get trapped under the rear tire. Ouch!
Look: Keep looking through the turns even when it feels like all hell is breaking loose. Like all other motorcycle riding genres, this helps you relax and let the bike sort itself out.
Steer with the Rear: As you get faster, you learn to back the bike into the turns. This gets the bike turned with the rear, rather than “steering” with the front, which can increase the risk of the front sliding out. Steering with the rear can be done by using a bit of rear brake as you enter the turn, or by downshifting and dumping the clutch. If you are going real fast then a hard countersteer will break it loose. Whether you use the brake or not depends on the amount of grip the ice has.
To ride on ice you need a dirtbike and off-road knobbie tires with screws in the tread blocks. You can do this a few different ways:
- Buy a few bags of special screws from a motorcycle or ATV retailer and spend time with a cordless drill installing hundreds of those little buggers into your knobs. One popular brand is Kold Kutters.
- Buy already prepared ice tires. The ones I have are from Fredette Racing Products. They sell tires with “AMA approved” screws, as well as the more aggressive Canadian type.
- Buy tires pre-made by local ice riders. Ask around.
The Canadian tires I have mounted carved right down to the hard icy surface on powder snow and are pretty decent even after the ice becomes shredded into fine chips.
The AMA tires don’t have nearly as much grip on soft surfaces. I know this from riding a borrowed 125 motocrosser with AMA tires (see photo).
You’ll want to get some tire wraps to keep the screw’s sharp when rolling the bike around the garage and loading in your truck or trailer… and prevent bloody hands.
My bike is a bone-stock KLX250s, which handles just fine for fun, but needs more power, especially for the larger lake ovals. I’m about to install a 351 big-bore kit to solve this problem.
More serious riders set up motocross bikes with ice fenders and lowered suspension.
What to wear? I saw all sorts of riding garb when I recently rode in New Hampshire with a group of friends. It was 10 degrees F, so naturally we were bundled up. Some riders wore dirt riding pants and regular winter jackets, some wore Carhartt jackets and pants or snowmobile gear.
Helmet: I wore both my spare street helmet (full-faced, of course) and dirt bike helmet with goggles. Shield fogging can be an issue, but cracking it open a bit solved the problem…mostly. Snowmobile shields are another option. A skull cap under the helmet helps keep the head warm.
Boots: Some people wear heavy winter boots and some wear off-road boots (including me). One thing to consider is that you need boots with soles that are durable enough to slide across rough ice all day long. Wear warm socks.
Gloves: My hands are susceptible to the cold. On days that are a bit warmer, I rode with insulated mechanics gloves. However, on the 10-degree days, I wore my insulated street gloves with glove liners. Note that wearing gloves that are too thick can lead to arm pump.
Layers: Wear layers! You will get warm enough to sweat and will want to shed a layer or two as the day goes on. I wear three or four layers of performance nylon shirts under a street riding jacket.
Pants: I wear an old pair of MotoPort overpants over jeans with motocross knee armor underneath.
Armor: Speaking of armor, I highly recommend you get armored-up. That ice is hard! In addition to knee armor, I have elbow guards, hip pads and my Impact Armor back and chest protector that I use for roadracing and track days.
Check out this video.
So, where does an ice rider ride? In New England, there are people who make the effort to drive their plow trucks to the lakes to clear ovals and road courses of various distances. And I’m sure there are plenty of places in other parts of the Northern U.S. with dedicated riders willing to clear lakes and ponds for others to ride.
Get online to find out where ice riding is available in your area. Please be considerate of those who do this fine work. Ask if it’s okay to ride before showing up and be sure to clean up after yourself.
If you’re the competitive type, you can always step up your game and go racing. I’m not a resource for ice racing, so do a Google search and ask around at dealerships and on Facebook.
You experienced ice riders, please share any more tips below.
Good luck and Back it in!
Check out these related posts:
- Dual Sport Motorcycling: Discovering My Little Town
- 10 Reasons Why Street Riders Should Ride in the Dirt
- How to Develop a Traction Sense
- Top 16 Off-Road Riding Tips
Stay Informed: Subscribe NOW!
Be a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy recommended products from Twisted Throttle
Please Donate to Keep the Articles Coming
If you liked this article and the many other articles on this site, please toss a few bucks into the hat. It’s greatly appreciated!