You may wonder why I think “Adjusting to a New Bike” is a topic worth spending time on. The fact is that I’ve seen and heard too many stories of people getting into trouble while trying a friend’s bike or when riding a new bike.
In this post I will talk about an issue that can lead to a crash if you’re not careful – Unfamiliar brakes.
One story I want to share involves a well-known safety journalist who took a well know safety instructor’s sportbike out and promptly totaled it. By all accounts, the reason for the crash was not a lack of skill, per say, rather it was a lack of familiarity with the power of sportbike brakes.
The journalist’s brake hand (and mind) were calibrated to a large adventure bike, not the top-spec, radial mount, four piston anchors that the sportbike was styling. All it took was a driver pulling out in front of the journalist to cause the over-braking to happen. A skid ensued, followed immediately by the sound of plastic and aluminum grinding itself mercifully into the pavement. Luckily, the rider came out of it in better shape than the bike.
I ride a lot of different motorcycles on the street and the racetrack, one of the first things I do is test the power and sensitivity of the brakes. I squeeze the front brake a few times with varying intensity.
I don’t ignore the rear brake as I press the pedal to see if it bites too abruptly and is prone to locking (many are), or is very weak, requiring significant pressure to get any useful brake force at all.
The Street Triple is a hybrid in that the rear brake seems to be weak initially, but then grabs. This is something I discovered the first time I descended my gravel and dirt driveway. Oh, and yes, I do use the rear brake. That’s a topic for another post.
Better Braking
Two fingers or Four? I say two on most sportbikes.Perfect practice makes perfect habits. And habits are what you’ll fall back on in an emergency.
Besides familiarizing yourself with the brake’s feel, you should also use good brake technique (always). Determine whether you should use four fingers on the front brake or if two fingers might give you better control.
No matter how many fingers you use, be sure to always SQUEEZE the front brake lever progressively. Grabbing a handful of brake lever will lead to nothing good. It will likely skid the front tire and you will be pile-driven into an unforgiving bit of very hard tarmac or dirt.
In most cases, this happens because you didn’t give enough time for the load to transfer onto the front tire contact patch. With little load on the front tire, the powerful front brakes can easily overwhelm the available traction.
Instead of a skidding front tire, it is possible to find yourself staring at your front wheel as you get flung forward. Or you may end up doing a stoppie. However, more times than not, the front tire skids before either of these occurrences happen. To prevent a skid, always squeeze and then squeeze harder if necessary.
Northeastern Racetrack Drought is Officially Over!
Tony with the Thompson Speedway pace car.
New Hampshire Motor Speedway has been the only game in town for motorcycle track day riders and racers for many years. We New Englanders had to drive 6 or more hours to the New Jersey Motorsports Park in southern Jersey to ride another racetrack. But, that’s is changing. Last year, New York Safety Track (NYST) opened its doors, making motorcycle track days a reasonable drive for most of us Northeasterners. Now, we have Thompson Speedway building a road course within 2 hours of Boston, 3 hours from NYC, and an hour from Providence! If that isn’t enough, Palmer Motorsports Park is well underway in Palmer, MA. Tony and I have been talking with the owners about running track days there in 2015.
Tony and I went to Thompson this past week to review the progress of construction. We met with Josh about the Tony’s Track Days 2014 schedule and with Louis about certain changes we wanted to have happen to ensure that motorcycles will be accommodated. Our list included barrier protection where a lot of runoff isn’t possible, redirecting path of travel to minimize risk when going under the bridge, as well as discussions about curbing, and runoff material. Louis and Josh listened carefully to our concerns, so we are confident that they will do the very best they can to make Thompson a safe as possible.
The track
The track itself is 1.7 miles long and combines very fast, sweeping sections, a loooong strait, and some very tight corners, some off camber. Tony and I have decided that we will run it in both the counter clockwise and clockwise directions, to expand the “number” of tracks we have available to us in New England. We also run NYST in both directions, so that alone can be thought of as 4 different tracks to ride! Take a look at the drive around we did last week.
Thompson Speedway clockwise
Thompson Speedway counterclockwise
Turn 2 going clockwise.
Straight going clockwise
Turn 8 Counterclockwise
Turns 9 and 8 going counterclockwise. Garages and pit in on the right.
Turn 10 Clockwise
Turns 1 and 2 Clockwise
straight on the right, turns 1 and two on the left ;looking counterclockwise.
Turn 11 onto the Straight going clockwise
Facilities
A beautiful new garage is being built next to a scoring/observation tower that will have a classroom and a pro shop. There is a golf country club connected tot he facility that will be serving lunches and dinners for track day customers. Camping will also be allowed.
Trying to figure out the Street Triple. Turn 9 Loudon www.owenstrackdayphotos.comMy trusty and familiar ZX6R. Monticello, NY. www.owenstrackdayphotos.com
I recently sold my trusty ZX6R for a more upright Triumph Street Triple R as my track day bike. I needed the more upright position as a way to help a chronic neck problem. The Street triple allows me to sit up when I’m working with track day customers at a slower pace. But, the upright and exposed ergonomics means I have to hunker down to get out of the wind blast when I’m going flat out.
I’ve ridden all types of bikes on various racetracks and usually acclimate myself pretty quickly to them. While some adjustment was not entirely unexpected, it did take a couple of sessions for me to start to get along with the ST-R.
The first track session on the Triumph was my first time riding the bike (I picked it up on my way to the track). The track was cold and a bit damp, so I took it easy. I came in at the end of that session not knowing whether or not I made a mistake buying the Triple.
The night before, fellow TTD instructor, Joel Allen helped me adjust the suspension to accommodate the bumpy Loudon circuit and then Peter Kates from Computrack Boston rechecked Joel’s work (spot on) the next day. Thankfully, I knew that suspension that is set up for going fast simply does not feel right when you’re not going fast. Riding at 60% made the bike seem like it wouldn’t hold a line. I kept hope and went out for another session. The track was warmer and so I got up to speed. Ah, that’s better. A smile was on my face at the end of that faster session.
The increased pace helped make the handling make sense, I then had to adjust to the upright riding position, which is not nearly as intuitive as a sportbike posture when riding fast. Sitting on top of a bike instead of low behind a fairing makes 120 mph a tiring experience. Transitioning my body from left to right at turn 7 and 8 at Loudon required me to use too much handlebar support while accelerating up the hill.
More rearward footpegs would be needed (I traded the stock rearsets for Daytona rearsets, which should help). Midway into the second track day of the 2-day event, I mounted Pirelli Diablo Supercorsa race tires so I could see what the bike was capable of. I was pleasantly surprised how well I got along with the Striple, with my lap times edging very close to my typical times on the ZX6R. Next stop, Barber Motorsports Park in Alabama in a couple of weeks. I can’t wait.
Turn 9 Loudon owenstrackdayphotos.com
Turn 6 Loudon
owenstrackdayphotos.com
Turn 11 Loudon
owenstrackdayphotos.com
Here, Jeannine rides the ZX6R before it goes to its new home with me following on the Street Triple. Exiting turn 3, Loudon.
owenstrackdayphotos.com
Both speed was and Lack of Visibility caused this crash.
I know what you’re saying. “You’re telling me that there are only 2 things I need to do to survive riding on the street?” You betcha. So, here is the caveat to this sensational statement; there are more like 1 Gazillion things you need to know to be the safest rider you can be. But, I don’t have that much time and you’d be bored by the time I got to number 15,000. So, I’m going with my top 2. However, if you get involved in a vehicular accident, make sure that you contact an auto accident attorney who can assess your situation and advocate for your rights. Try to do your research and find an experienced auto accident attorney or a Michigan motorcycle accident lawyer to better your chances of achieving a positive outcome.
And with no further ado, here they are. The envelope. please.
#1 Being “Speed Smart”
#2 Being Visible
Of all the things you can and should know about riding a motorcycle, these two strategies will allow you to avoid 80 to 90% of the most common situations that lead to motorcycle crashes. I hear you yelling at your laptop or smartphone saying “What about [INSERT YOUR FAVORITE STRATEGY HERE]”. I understand… really. There is way more to know to avoid becoming roadkill than just these two strategies. But, I contend that most close calls and crashes can be avoided if you follow my suggestions and focus first on these two strategies. Let me elaborate.
Being “Speed Smart” doesn’t necessarily mean sticking to the posted speed limit. I’m no angel when it comes to ignoring ridiculous speed limit signs, especially when the payoff is worth the risk of a ticket ( a great section of twisty tarmac with little traffic). No, I’m talking about being smart about when and where you wick it up. You can avoid a majority of close calls if you just keep the throttle under control. Here’s how.
Ride at “Expected” Speeds
It’s important to ride close to the marked speed limit when riding through town centers, and whenever you are near other drivers, especially when riding through intersections. Riding at a speed that is greater than is expected will likely result in the driver pulling in front of you, thinking he or she has time to go. This is largely because a motorcycle has a narrow frontal area, which makes it more difficult for drivers to judge your approach speed and distance.
Ride Slow in a Slow Environment
One of the most common reasons motorcycle riders crash is because they ride faster than the environment will safely allow. Riding at the speed limit makes total sense when there is a lot of traffic, but what about when the road opens up? It may be tempting to go WFO, but no matter how much you wish the road were a racetrack, it is not! You can get away with excessive speed for a while, but some day it will bite you. I can almost guarantee it. Really fast sport riding belongs on a racetrack, dummy.
Even if you are a racetrack hero, you must understand that the unpredictable nature of the street does not allow you to exercise your full cornering prowess. With hazards such as road surface hazards, unexpected changes in radius and camber, or other vehicles crossing into your lane you can easily exceed the limits of the environment even though you may be nowhere near your personal limits.
Cornering Correctly: Slow in, Fast out
The vast majority of single-vehicle crashes are the result of riders failing to negotiate a curve and a common reason for this is a rider entering a corner at a speed that is too fast for the conditions or for the rider’s ability. The best strategy is to slow to a conservative speed and then gradually accelerate when you are sure it is safe to do so. Keep in mind that you can always get on the gas, but you can’t go back in time to enter the turn at a slower speed.
Respect Time and Space
Still not convinced just how significant speed is to keeping you safe? Then consider the timing and circumstances of a typical 30 mph crash. At that speed you are traveling at 44 feet per second (1 mph = 1.47 ft/sec). Getting a motorcycle stopped at 30 mph takes just over two seconds and requires about 35 feet of space. But, braking distances include more than just the time and space to physically stop your motorcycle. It also includes “thinking time” and “reaction time”. At 30 mph you can count on using about .7 seconds or 31 feet to realize that there is a problem. It then takes you another .3 seconds or 13 feet to react by rolling off the throttle and reaching for the brakes. That means you traveled 44 feet before even touching the brakes. Finally, it takes you about 2.2 seconds or 35 feet (with a typical deceleration rate achieved by the average rider) to bring the motorcycle to a halt. Add this “braking time” to the “thinking time” and “reaction time” and you’ll need a total of 3.2 seconds and 79 feet with which to stop.
Top Motorcycle Survival Tip #2: Be Visible
“SMIDSY”= “Sorry Mate, I Didn’t See Ya”
The most common phrase uttered by drivers who are involved in a motorcycle crash is; “I didn’t see him”. It’s easy to blame the driver for being inattentive. After all, texting, NAV systems, and other distractions are vying for drivers’ attention…you know who you are. While this is a reality on today’s roads, too many riders fail to recognize their role in being visible, choosing to wear dark colors and riding in a way that hides them from other drivers.
Even being seen is not as reliable as we would like. Most motorcyclists have stories of drivers pulling out in front of them even though the driver was looking directly at them. What would cause a driver to proceed if the rider was in plain sight? It’s common for a driver’s brain to dismiss the appearance of a relatively insignificant (small) vehicle (motorcycle) on the roadway and pull out without ever “seeing” the motorbike.
Use Effective Lane Positioning
In traffic, it’s important to constantly evaluate your ability to see and for others to see you. Poor lane position is a factor that can prevent you from being seen and seeing hazards. This includes not having sufficient following distance. Ample following distance provides a wider angle of view to see past the vehicle and allow other drivers to see you.
Proper lane positioning also includes your location within the width of your lane. Motorcycle riders have the option of riding in the left, center or right portion of the lane. This gives you the ability to place your bike where you can see farther ahead and where other drivers can see you. Exactly what is the best lane position? In many situations, riding in the left/center of your lane makes the most sense. This position allows you to see past the vehicle ahead and gives you a good angle of view of the oncoming lane. Certain situations require you to alter this position, such as an oncoming vehicle threatening to cross the centerline.
Lane position changes continually depending on the road surface, other drivers, and your angle of view.
Loud Pipes
Basic science says that sound is not a reliable source of information. Sure, loud pipes increase the likelihood that drivers will know you are in the vicinity, but don’t be fooled into thinking that sound will help a driver locate where you are in traffic. This is why installing loud pipes is not a great strategy for increasing safety.
A much more reliable strategy is to be more visible. A driver who sees you and is able to accurately judge your speed and distance is much less likely to pull out in front of you. The importance of using strategies for being seen cannot be overemphasized. Unfortunately, too many riders don’t seem to understand this.
There are lots of other tips that are important for surviving on a motorcycle like don’t ride drunk or stoned, be attentive, etc.But. if you can follow these two strategies I outlined, you are well on your way to making it home at the end of a great day of riding. If you have been injured in an accident caused by a drunk driver, make sure that your rights are protected by hiring a drunk driving accident lawyer.
OK. Now it’s your turn.
I know you’ve been chompin’ at the bit to tell the world what you think is the most important tip for surviving. So, let’s hear your comments.
Please Donate to Keep the Articles Coming
If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!
Click the PayPal “Pay Now” button.
Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.
Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.
The construction of the Palmer Motorsports Park is a huge project!
Yesterday, Tony and I attended the groundbreaking ceremony for the Palmer Motorsports Park located in south-central Massachusetts. Palmer is scheduled to have some activity by the end of 2014. With the opening of the New York Safety Track in central New York, Thompson Speedway Motorsports Park located in northeastern Connecticut, and the Palmer track Northeast motorsports enthusiasts who like to ride or drive on a racetrack have a lot to celebrate.
This is a big change for us New Englanders, because until now, we have had only New Hampshire Motor Speedway (Loudon) nearby. Many of us trailered 6 or more hours to New Jersey Motorsports park to get our racetrack fix on. The racetrack drought seems to be over in the Northeast.
The track layout is ambitious with 15 corners, 191 feet of elevation change and over is 2 miles long. The track will snake through blasted out hillsides. Track runoff is being discussed to allow for safe motorcycle track day events to be held. Tony and I are working with the track designer/engineer, who may have a knowledge about section 179, to make sure these concerns are considered.
Palmer Motorsports Park track model.15 turns and 190 feet of elevation change!
Video
Check out the video of an animated lap around the proposed circuit:
Terrain
The park is within a hollow surrounded by tall hills. The lowest point is 830 feet above sea level, the highest is 1020 feet. The town of Palmer is 330 feet above sea level. This track requires a lot of earth moving, including blasting through granite to carve the course through the very rough terrain. See the photos to see what I mean. These guys are the real deal and the town is behind the effort in a big way!
Serious earth moving and blasting going on.
This is a huge project!
PMP track model.
PMP model shows the tunnel at the very bottom at turn 1 or 2 and the elevation increase as the track heads northeast.
Tony from TonysTrackDays mingles with town officials and other motorsports enthusiasts.
Track owners and town officials make speeches while the press and interested parties listen.
The lucky new owner of the ZX6R. I hope you enjoy it as much as I have.
Why is it so hard to let go?
Yesterday was a sad day. I delivered my 2005 Kawasaki ZX6R track bike to its new owner. The transaction went really smoothly; the new owner is a track day friend who I like and who I know will take good care of the ZX, and I got the price I needed for the bike and all the spares. So why is it so difficult to part with this conglomeration of aluminum, steel, rubber and plastic?
I know I’m not alone. Many people I talk with have the same experience as I when it comes to saying goodbye to a motorcycle they’ve owned for a period of time. I’ve been sad every time I watched the taillight of all my previous bikes roll away in the back of some stranger’s truck or trailer. The Honda CB900F, the RD400 race bike, the Ninja 750, the VFR800, the MZ Scorpion racer, and now the ZX6R.
It makes me wonder what exactly causes this attachment to a machine. Here are a few of my thoughts:
Motorcycling is more than transportation. When we ride, we become immersed in an experience and the motorcycle plays an intimate part in that experience. I equate it to having a dance partner whose subtle moves become familiar over time.
Bikes are riding “partners”. You can become more or less involved and attached with a particular bike depending on the experiences you had “together”. For instance, the motorcycles I have had the most epic experiences on tend to find their way deeply into my heart.
Motorcycles become part of a rider’s identity. Deciding to sell a bike that you were proud to own can require you to rethink your identity and sense of individuality. The act of letting one bike go to make room for a new motorcycle requires a certain amount of personal reflection as we transition our identity to the new machine.
We invest in our motorcycles, both emotionally and financially. Many of us care for our motorcycles as if they were a human, putting the “good” oil in her, lubing all the necessary parts, and keeping her clean. We spend money on personalizing our machines so they fit our identity and needs. Whether this is crash protection, chrome or carbon fiber bits, or luggage or navigational farkles that we bought with the idea of finally conquering those epic adventures.
Goodbye ZX6R
My ZX6 spent last night in its new owner’s garage. I can’t help but feel sad, even though it’s new chapter will be as bright as the old. But, does the green ZX mourn for our severed companionship. I hope not. I would hate to think that it felt abandoned like a child left on a doorstep. If there is any consciousness the ZX has, I hope it understands how much I appreciate its friendship and that it will always have a special place in my heart. *sniff
Tell me about your experiences with selling bikes. What bikes were the hardest for you to let go and why?
A thought on selling race bikes
I’ve sold three race/track bikes. The thing about parting with a bike that you’ve relied on to not only perform well enough to allow you to beat the competition, but also to be solid enough to keep you safe when flirting with the hairy edge of control can be extra difficult. Race bikes require an extra level of personalization so that the suspension, controls, and engine/fueling performance is suited to your individual preferences. A lot of time and money is spent getting a motorcycle right so it can perform on a racetrack at an expert level.
That said, many racers look at their race bikes as journeyman tools that have one purpose; to get the job done. Once it becomes uncompetitive, it is cast aside for a sharper instrument. I don’t mean to sound cold, but the mindset of a serious racer is different than a street rider who takes pride in being a motorcyclist and chooses a particular bike not only for how it performs, but also for the pride the bike gives its owner.
My ZX6 was unique in that it was a track weapon, but not to win trophies, rather to do my job as a track day instructor, and to provide me with fun when I got to run hot laps on my own. As such, I have shared countless miles with it revving over 12k rpm and at sometimes crazy lean angles. It was a companion that made me feel (and look) good. I will miss it dearly.
Me and my 1982 Honda CB900F at the dragstrip in 1991. What a great bike.
The 1987 Kawasaki NInja 750. A short but satisfying relationship.
Picking up my brand new 1999 VFR800. Another awesome bike.
Posing with my 2000 MZ Scorpion race bike. It was a willing companion.
The mighty ZX6R. I will miss you dear friend.
My 1971 Bonnie. I owned it until 1989.
My Yamaha RD400 race bike. A companion in victory. 🙂
Please Donate to Keep the Articles Coming
If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!
Click the PayPal “Pay Now” button.
Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.
Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.
My family is full of motorcycle riders, including my wife, Caroline and daughter, Jeannine. Enter another member of the family in the form of Matt, Jeannine’s boyfriend, who rides a 2008 Yamaha R6s and you’ve got a rolling tribe.
My family didn’t start out as motorcyclists. I believe it was my almost crazy obsession with the two-wheeled sport of motorcycling that caused my otherwise sensible wife, Caroline, to take the MSF course in 1995 and trust me to provide her with the constant flow of knowledge necessary to survive riding a machine that seems to conspire at every moment to toss you to the ground. A few years later she became a MSF instructor. (I have been an instructor since 1995).
Caroline with her previous ride: a Yamaha YZF600
Caroline enjoys the view from Hungry Mother
Along came our lovely daughter, Jeannine, who probably assumed every kid’s mom and dad rode motorcycles. After all, there have been stacks of magazines covering every flat surface in the house since she was a baby.
A very young Jeannine rides shotgun on Caroline’s first bike.
Caroline and Jeannine staying dry at Americade 2010
Well, Jeannine is no longer a baby (but she’s still my little girl), and she is an accomplished rider in her own right. She works for Twisted Throttle, has just returned from a week long dual-sort trip through Alaska, and has become accomplished enough of a racetrack rider that I hired her as a control rider for Tony’s Track Days. Proud, this father is.
Daughter and Father
Dad follows Jeannine
Now, she brings a new member to the family. Matt and Jeannine’s first date was a ride, he on his R6 and her on her ZX6R. Love at first sight. I discovered that Matt is a good guy (once I put the shotgun down and gave him a chance). I shouldn’t have worried; Jeannine makes good choices.
We strongly encourage you to put the Maldives on your travel bucket list and stay at one of Anantara Veli Maldives overwater villas because life is too short to miss out on this paradise!
Mabry Mill…the most photographed location on the BRP
Matt and Jeannine
Caroline has let riding fade a bit more into the background since her many hobbies take her time and energy. However, there is always energy for our annual family motorcycle ride.
This year we went back to one of our favorite places on earth: The Blue Ridge Parkway of Virginia and North Carolina. We love the scenery, winding roads, the people and Will Beers, the owner of Willville Motorcycle Camp. Will is one of us…a guy who decided that he wanted to surround himself with mountain beauty and motorcycle riders who share his passion for the sport.
Caroline on the BRP- 2013
Will Beers of Willville Motorcycle Camp
Enjoy the gallery of photos from our 2013 trip to the BRP and stay tuned for more posts about my motorcycling family.
On our way to BRP via Maryland
Lunch stop in Fishkill, New York
Meeting up with Jeannine and Matt in Maryland
Unexpected front tire change for Caroline in Maryland
Jeannine gets a coffee boost before continuing.
FInally, the BRP
Willeville Bunkhouse
Will and Mike take us on some of their favorite roads
Photo Op
Lover’s Leap, Virginia
The tribe, Virginia, 2013
Will’s 650 V-Strom knows its way around these here parts.
Ready for a camping excursion.
Mabry Mill…the most photographed location on the BRP
Rainy camping at Doughton Park
Matt is all smiles, even in the pouring rain.
Prepared
Spidey doesn’t mind the fog.
I still enjoy street riding. A lot.
Care must be taken
Back of the Dragon, Route 16 in NC
Jeannine being Speed Smart
and Matt
View looking west from Hungry Mother overlook
Rt 16
Caroline enjoys the view from Hungry Mother
What’s around that corner?…
…more twisties
Blue Ridge Mountains
Caroline almost made it to this gas station without us having to push her bike.
Hillsville, Virginia
Inside the Willville Bunkhouse…cozy
Willville and twisted Throttle represented
Jeannine and Matt
We take Mike to lunch
Mike
Meadows of Dan has great ice cream…
…and good mellons
Meadows of Dan store. just sit a while.
Ninja 1000 test ride…thanks Jim
Tuggle’s Gap, the beginning of one of the twisties bits of pavement (head east from here)
Jeannine.
Matt does a product endorsement of Clear Shot
Nice Shoei, J!
Matt and Jeannine heading toward home.
Caroline at the blue Ridge Parkway, 2013
Souvenir Sticker
One more sightseeing stop
Panoramas are fun.
Please Donate to Keep the Articles Coming
If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!
Click the PayPal “Pay Now” button.
Then indicate quantity in $2.00 increments. – Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.
Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.
Be a Better Rider: Sign Up for Personal Training with Ken
