New Bike, New Track

It’s hard enough to get accustomed to a new-to-you bike, but throw in a new-to-you racetrack, and things can get interesting. It’s kinda like patting your head while rubbing your tummy in a circular manner (I’m pretty good at that, BTW). Normally, I get up to speed fairly quickly when I ride a new track, evaluating each corner for its character: radius, camber, and whether it is an “entry” turn or an “exit” turn. But, it took me longer than normal to sort out the Barber track, mostly because the track consists of blind corners and a layout that is somewhat complex.

This means that it took a few sessions to not feel lost. I would be asking myself, “Wait, is this that tight turn or is it that turn that opens up?”.

Add to that the need to acclimate to a new-to-me motorcycle and the first day at Barber had me not exactly feeling Stig-like. The second day was much better.

Which way do I go?
Which way do I go? Notice the fogging face shield.
Copyright Raul Jerez / Highside Photo

Learning the Barber Motorsports Rollercoaster

I could tell you all the super-secrets I use to learn new tricks, but I would be repeating myself, because I already wrote a lengthy article on tips for learning new tracks on the Tony’s Track Days website. Read it HERE. Share any other tips you have in the comments below.

Even with my book of tricks in mind, I had a harder than normal time figuring out Barber. Now, to be fair to myself and to put things into perspective (lest you thought for one minute that I wasn’t awesome from the start), I was going respectably fast in the Advanced group after the first session. However, my standards for pacing with the fast guys made me rather discouraged. I know many of you slowpokes are used to being passed by half of whatever group you ride in, but I am not (just kidding). But, even after the third session, I was feeling a bit too much like I should be in the Intermediate group.

This would not do, so I consulted with Tony and my faster peers from New England and discovered that I was slowing too much for a few corners and not getting on the gas nearly early or hard enough. The last two sessions were better, as I started identifying the problem corners and applying some of the reference points Tony and the others were using.

Mother Nature's Tire Warmers
Mother Nature’s Tire Warmers

Sunday morning was 25 degrees F, so we substituted the frozen on-track festivities for a walk around and some bench racing around the tire warmers. Tony and I didn’t bring tire warmers, so we opted for Mother Nature’s warmers, which worked surprisingly well (at least on one side of the tires). After lunch, the temps got up to a whopping 35 degrees, so we pulled on our leathers and hit the track.

Nippy fingers and a fogging face shield told me to take it slow, but after a few laps, it became apparent that the track itself had some grip. Since it was 70 degrees only a few days before we arrived, the ground wasn’t nearly as cold as the air and the asphalt was well over 50 degrees…not great but acceptable.

Let the fun begin. The rest of Sunday was a blast. I started getting up to speed hooking up with Keith, Woody, and Rich. Tony, Adam and Aaron were too fast for me.  See the videos HERE.

But, wait! There is more to this story, so read on.

The ZX6R owenstrackdayphotos.com
The ZX6R
owenstrackdayphotos.com

A New Bike

If you’ve been reading the RITZ blog at all you probably know that I sold my most-awesome ZX6R for a Triumph Street Triple R. I really didn’t want to sell the ZX, but a medical issue required me to make the switch from a crouched racer posture to an upright naked posture (oh, grow up).

The differences between the ZX6 and the Street Triple’s spanned only a few areas: handling, gearing, power characteristics, body position, throttle response, drive timing, front tire grip, footpeg feel, shifting ease, wind noise, and color (I wonder how the Striple would look painted Kawi Green).

With all these things to adjust to, it took me most of the first day to get a good session in.

Is this bike twerking? Copyright Raul Jerez / Highside Photo
The new bike.
Copyright Raul Jerez / Highside Photo

Where’s the Power?

In a nutshell, I wished the 675 had more power. I know, I know power just masks poor riding. But, it also is very useful when trying to pace with the big boys.

The Triple doesn’t drive nearly as hard as the ZX636, so I needed to learn to ride the bike more like a small displacement bike, like a SV. To get the bike out of corners and reach acceptable speed on the straights, I needed to go from cracking the throttle to Wide Open Throttle (WOT) immediately to get the drive I wanted. I found myself using full throttle a lot. The 1050 throttle tube helped make full throttle a bit quicker compared to the stock tube, but a MotinPro unit may find its way onto the Triple’s handlebar end fairly soon.

Why is my Bike Twerking?

OK, so power was down, but that is something I found to be rather fun to manage. Full throttle is never boring. I even think I could have kept with Tony if the bike had better manners in the handling department. Don’t get me wrong, for most riders, the Street Triple R’s fully adjustable fork and shock would be awesome, especially for street duty. The bike never scared me, but I was pushing the bike fairly hard and found the bike wanting to wiggle like Miley Cyrus when cresting the turn 3 hill at full honk. I never felt as if I could drag a knee over that hill with the way the Striple was Twerking beneath me.

Perhaps there was some more adjustments that could have tamed the beast, but the temperatures were so low and the oil so thick that any adjustments would probably not net any real benefit, so I left the adjusters at the Loudon settings and dealt with it. Peter at Computrack Boston will be receiving my forks and order for a new shock by the end of the year so I can have more range of adjustment to suit my style.


In a future post, I will talk about my experience as a track day customer, as opposed to an administrator/instructor. I made note of several areas that helped me better relate to track day customers I work with. Stay Tuned.

Subscribe to my Newsletter Mailing List to receive update notices in your email inbox.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!





Check out these posts:


How Can I help You? Online Coaching NOW AVAILABLE
Stay Informed: Subscribe NOW!
Trianing-Tours_LandingBe a Better Rider: Sign Up for Personal Training with Ken
Support Riding in the Zone: Buy a book
Support Riding in the Zone: Buy products from Twisted Throttle & Amazon
Twisted_Affiliate-Interphone-widget
Twisted_Affiliate-Interphone-widget

 

Barber Track Day Videos – Street Triple R

Sometimes, video is worth a thousand words, so here I present three videos from the recent trip down to Barber Motorsports Park in Alabama.

Below is a video that Aaron (Aprilia RSV4) shot of my first few warm up laps during that last session. The video does not show just how much of a roller coaster this track is. The elevation changes are significant. The Museum turn where we ride over the curbing is a less extreme version of the corkscrew at Laguna Seca.

Here’s one where I follow Tony onto the track and then he takes off. Tony got a hang of the track pretty quickly. It was about 45 degrees but sunny, so after a few slow laps, the tires were able to get warm enough for us to lay down some fairly quick laps. I was still learning the track and I can see several areas where I could maintain higher entry speeds and get on the gas earlier. Can you spot these places?

Ken follows Keith on his new-to-him 1100 Monster EVO racebike:

Below is a video posted by Keith (Ducati 1100 EVO Monster). I appear after 4 laps or so. Thanks Keith!

Barber motorsports part X-Act Nov 24 from GYRO BOX on Vimeo.

 

Subscribe to my Newsletter Mailing List to receive update notices in your email inbox.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!





Tony and Ken’s Barber Experience- UPDATED

Tony from Tony’s Track Days and I are leaving for the southern state of Alabama to take in the beauty (and warmth?) of the Barber Motorsports Park and absorb decades of motorcycle history at the Barber Museum. We’ll be riding our motorcycles with X-Act on Saturday and Sunday. Reports to follow. In the meantime, enjoy this video with Ben Spies and Colin Edwards. I’m afraid our trip…I mean Mancation… may be scarily similar to theirs:

Track Day Prep

Tony and I are riding with X-Act Motorsports and they, like many track day organizations, require glycol anti-freeze/coolant to be removed and replaced with distilled water or one of their approved substances. Those of you who ride with TTD know that we don’t require customers to drain their coolant. This is because in the many years that we’ve been running track days, we rarely ever have much trouble with coolant spills. Yes, occasionally some dribbles out of the radiator overflow from a gravity-challenged bike, but it’s never been a big problem. But, it sure can be a hindrance for regular street motorcycle riders to remove their coolant.

And now I’m reminded of just what a pain it is to do. I’m mechanically inclined, so this chore is well within my abiities. But, still… it’s messy and time-consuming when I could be doing something much more productive like polishing my wheels.

The Bull dog ready for some barber action.
The Bull Dog ready for some Barber action.

Transforming the Street Triple from street duty to track bull dog is not a big deal. (I decided that it looks like a bull dog) Although, I discovered that Triumph makes silly decisions that make it unnecessarily difficult to take street stuff off. One poor decision was to put the front turn signal connectors underneath the fuel tank! WTF? To raise the tank, I have to remove the Scott’s damper, so I’ll be putting connectors where Triumph should have put them in the first place: between the tank and the signal housing so the directionals can be removed in seconds, not tens of minutes.

X-Act also wants us to zip tie our sidestand up, which TPM requires, too. Again, we at TTD never found this to be an issue, but it’s a small thing to do. I’ll just make the zip-tie loose enough to slip off so I can use the stand in the paddock. No, we aren’t bringing paddock stands…light is right on this trip.

Gear packing

So, the bike is ready. Next on my list is packing my riding gear. I have one of those really cool Ogio gear bags on wheels, but Tony tells me he has matching plastic bins that fit perfectly in the back of his truck, so I may have to leave the sexy Ogio at home.

I keep all my track stuff in one place, so gathering it up was easy. I kept my tattered Vanson leathers aside until I found out whether my TTD Heroic leathers would be arriving in time for the trip. I heard from Todd today and he says that the leathers must have been shipped by camel, so they won’t be at my house before I leave. He says they will be at the hotel in Birmingham when we arrive. We shall see.

If they do arrive, then Tony and I will either look like we intended our matching black and yellow TTD leathers to look…like team colors. But there is a slight risk that we could be mistaken for advocates of same sex marriage (I don’t know Tony’s politics on this matter, but I’m pro, BTW). We’ll see how the southern boys react. Not that there is anything wrong with that.

Brrrrr?

Wait, I thought Alabama was supposed to be warm, or at least warm-ish. But, the extended forecast says 45 degrees on Sunday. Is this some cruel joke? Well, I’m not laughing.

Now, we hearty New Englanders can handle the cold temps, it’s just that we prefer temperatures that don’t conspire to make our tires Flintstone-hard. What I can count on is the warmth of good friends hanging around the tire warmers and fighting over Wendy Butler’s cookies.

The Trip Begins

I meet Tony at his house on Wednesday, Nov. 20th at 9:00 AM. We’ll load the bikes and hit the road. Anyone know where there is a key fob store near Rt 84?

We made it to Virginia and will do the rest of the trip tomorrow. All is well so far. Tony hasn’t farted once, at least he denied doing it, but I don’t buy his claim that Renee spilled baked beans in the truck last week. I didn’t argue.

So, a trip to Walmart scored us a tarp, extension cord and tarp tie downs. So, now the bikes are tucked in for the night with the ceramic heater I brought turned on high to guarantee that our radiator water won’t freeze.

We Have Arrived

Well, 19 hours of driving later, we pulled into the hotel located just down the road from the racetrack. we’ll be meeting with the other Northerners for dinner and then we’ll hit the museum tomorrow. Look for lots of photos of the museum in the next couple days.

The Barber Motorcycle Museum

I’ll let the gallery speak for itself.

First Day on the Barber Track

We expected cold and possibly rainy conditions, but the weather Gods looked favorably on us and gave us dry and not too cold temps (for us New Englanders). We were in the 40s in the morning, with 50s in the afternoon. Getting heat and keeping it in the tires was a challenge, but the grip was fine for the pace we were running as we learned the track.

So, what is the track like and was it worth driving 20 hours to get to experience its awesomeness. In one word, yes. It’s a combination of fast, flowing corners with some tight stuff thrown in. The biggest challenge was to figure out where the heck I was on the track. There are a lot of blind corners, many hidden by hilltops. I would be approaching a hill, not remembering what was on the other side. Once I crested the hill, I would say “oh yeah” and then get on the gas.

By the last morning session, I was starting to not be so lost and was picking up the pace. The afternoon sessions went very well, except for the riders who didn’t understand the concept of taking a couple of laps to get some heat int he tires before wicking it up. That session was a wash with two red flags almost as soon as the session started and again at the restart. Oh well.

Up and Down, Left and Right

The Barber track is a medium-fast, flowing roller coaster of a track. It was a challenge to learn, but once I figured out where I was on the track, things went well. One problem was the cold temperatures. Saturday was in the low 50s and wasn’t bad, but it was 30 degrees when we arrived on Sunday.

We decided to give the track and the air a chance to get a bit warmer before we rolled. After lunch, we went out and proceeded to lay down some respectable laps. I did not have tire warmers, which would have made the first few laps less stressful, but the tires did eventually warm enough for fast, knee-down cornering.

Here are some photos from the weekend. Thanks to Raul Jerez / Highside Photo.

See videos of the Barber Track day HERE.


Since this will be our first time at Barber, we will be putting our “Learning New Tracks” skills to use.  I did write an article on learning new tracks last year for the TTD website, but do any of you have tips for us that you find helpful?

Subscribe to my Newsletter Mailing List to receive update notices in your email inbox.


Please Donate to Keep the Articles Coming

If you liked this article and the many other articles on this site, please toss a buck or five into the hat. It’s greatly appreciated!

    • Click the PayPal “Pay Now” button.
    • Then indicate quantity in $2.00 increments. Example: put “2” in “QUANTITY” field to donate $4.00, “3” for a $6.00 donation, etc.

Why $2.00? Due to the PayPal fee structure, a $2.00 donation is significantly more beneficial compared to a $1.00 donation.

Thank You!